Sony Kdf E50a11e Operating Instructions
Have a look at the manual Sony Kdf E50a11e Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
21 GB Using the Menu Picture Adjustment menu Selects the picture mode. 1Press OK to select “Picture Mode”. 2Press m/M to select one of the following picture modes, then press OK. • Vivid: For big lighted spaces. • Standard: Optimal picture for home use. • Custom: Allows you to store your own prefered settings. Tip You can change the picture mode by pressing repeatedly. 1Press OK to select the option. 2Press
22 GB Reset all the picture settings to the factory settings. 1Press OK to select “Reset”. 2Press m/M to select “OK,” then press OK. Reduces the picture noise (snowy picture) in a weak broadcast signal. 1Press OK to select “Noise Reduction”. 2Press m/M to select “Auto”, then press OK. Tip This option cannot be used for an input signal from the Y, PB/CB, PR/CR sockets of / 3. Enhances the contrast for dark scenes. 1Press OK to select “Iris”. 2Press m/M to select “High”, “Mid”, “Low” or “Off” then press OK. Reset Noise Reduction Iris
23 GB Using the Menu Sound Adjustment menu 1Press OK to select “Sound Effect”. 2Press m/M to select one of the following sound effects, then press OK. • Natural: Enhances clarity, detail, and sound presence by using “BBE High definition Sound System*1.” • Dynamic: Intensifies clarity and sound presence for better intelligibility and musical realism by using the “BBE High definition Sound System.” • Dolby Virtual *2: Uses the TV speakers to simulate the surround effect produced by a multi channel system. • Off: Flat response. Tips • You can change sound effect by pressing 9 repeatedly. • If you set “Auto Volume” to “On”, “Soud Effect” changes to “Natural”. *1Licensed by BBE Sound, Inc. under USP4638258, 4482866. “BBE” and BBE symbol are trademarks of BBE Sound, Inc. *2Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Adjusts higher-pitched sounds (Treble), adjusts lower-pitched sounds (Bass), and emphasizes left or right speaker balance (Balance). 1Press OK to select the option. 2Press
24 GB Selects the sound from the speaker for a stereo or bilingual broadcast. 1Press OK to select “Dual Sound”. 2Press m/M to select one of the following, then press OK. • Stereo/Mono: For a stereo broadcast. • A/B/Mono: For a bilingual broadcast, select “A” for sound channel 1, “B” for sound channel 2, or “Mono” for a mono channel, if available. Tip If you select other equipment connected to the TV, set “Dual Sound” to “Stereo,” “A” or “B.” Keeps a constant volume level even when volume level gaps occur (e.g., adverts tend to be louder than programmes). 1Press OK to select “Auto Volume”. 2Press m/M to select “On,” then press OK. Tip If you set “Sound Effect” to “Dolby Virtual”, “Auto Volume” will automatically be switched to “Off”. Dual Sound Auto Volume
25 GB Using the Menu Screen menu Automatically changes the screen format according to the broadcast signal. 1Press OK to select “Auto Format”. 2Press m/M to select “On,” then press OK. Tips • Even if you have selected “On” or “Off” in “Auto Format”, you can always modify the format of the screen by pressing repeatedly. • “Auto Format” is available for PAL and SECAM signals only. For details about the screen format, see 15. 1Press OK to select “Screen Format”. 2Press m/M to select “Wide,” “Smart,” “4:3,” “14:9” or “Zoom” (see 15 for details), then press OK. Adjusts the horizontal picture position so that the picture is in the middle of the screen. 1Press OK to select “RGB Center”. 2Press
26 GB Features menu Sets a signal to be output through the socket labelled / 2 on the rear of the TV. If you connect a VCR to the / 2 socket, you can then record from the equipment connected to other sockets of the TV. 1Press OK to select “AV2 Output”. 2Press m/M to select one of the following, then press OK. • D-TV: Outputs a digital broadcast. • A-TV: Outputs an analogue broadcast. • AV1: Outputs signals from equipment connected to the / 1 socket. • AV4: Outputs signals from equipment connected to the 4/ 4 socket. • Auto: Outputs whatever is being viewed on the screen. Turns off the TV speakers e.g. to listen to the sound through external audio equipment connected to the TV. 1Press OK to select “TV Speakers”. 2Press m/M to select one of the following, then press OK. • On: the sound is output from the TV speakers. • One Time Off: the TV speakers are temporarily turned off allowing you to listen to the sound from external audio equipment. Tip The “TV speakers” option automatically returns to “On” when the TV set is switched off. • Permanent Off: the TV speakers are permanently turned off allowing you to listen to the sound from external audio equipment. Tip To turn on the TV speakers again, change to on. You can select the options listed below on the Features menu. To select options, see “Navigating through menus” (page 19). AV2 Output TV Speakers Select: Set: Back:OKEnd:MENU AV2 Output TV Speakers PC AdjustmentTV On Features
27 GB Using the Menu Customizes the TV screen as a PC monitor. 1Press OK to select “PC Adjustment”. 2Press m/M to select one of the following, then press OK. • Phase: Adjust the screen when a part of a displayed text or image is not clear. • Pitch: Enlarges or shrinkes the screen size horizontally. • H Center: Moves the screen to the left or to the right. • V Center: Moves the screen up or down. • Power saving: Turns to standby mode if no PC signal is received. • Reset: Resets to the factory settings. Tip This option is only available if you are in PC Mode. PC Adjustment
28 GB Timer menu Sets a period of time after which the TV automatically switches itself into the standby mode. 1Press OK to select “Sleep Timer”. 2Press m/M to select the desired time period (“30min”/“60min”/“90min”/ “120min”), then press OK. The indicator on the TV (front) lights up in amber. Tips • If you switch off the TV and switch it on again, “Sleep Timer” is reset to “Off.” • “Sleep timer will end soon. Power will be turned off.” appears on the screen one minute before the TV switches to the standby mode. • If you press / , the remaining time in minutes before the TV switches to the standby mode is displayed on the screen. 1Press OK to select “Clock set”. 2Press m/M to select the day, then press ,. 3Set the month, year, and hour in the same way as in step 2. 4Press m/M to select the minute, then press OK.
29 GB Using the Menu Set Up menu Starts the “first time operation menu” to select the language and country/region, and tune in all available digital and analogue channels. Usually, you do not need to do this operation because the language and country/region will have been selected and channels already tuned when the TV was first installed (13). However, this option allows you to repeat the process (e.g., to retune the TV after moving house). 1Press OK to select “Auto Start Up”. 2Press OK to select “Yes.” The auto-tune display appears on the screen. 3Follow steps of “6: Selecting the language and country/region” (page 12) and “7: Auto-tuning the TV” (page 13). Selects the language in which the menus are displayed. 1Press OK to select “Language”. 2Press M/m/
30 GB Tunes in all the available analogue channels. Usually you do not need to do this operation because the channels are already tuned when the TV was first installed (page 13). However, this option allows you to repeat the process (e.g., to retune the TV after moving house, or to search for a new channels that have been launched by broadcasters). 1Press OK to select “Auto Tuning”. 2Follow step 1 of “Auto-tuning the TV” (page 13). When all available analogue channels have been tuned, the TV returns to normal operation. Changes the order in which the analogue channels are stored on the TV. 1Press OK to select “Programme Sorting”. 2Press M/m to select the channel you want to move to a new position, then press OK. 3Press M/m to select the new position for your channel, then press OK. Repeat the procedure in steps 2 and 3 to move other channels if required. Auto Tuning (Analogue mode only) Programme Sorting (Analogue mode only)