Sony ILCE-5100 Manual

							Initializes the main shooting settings  to the default  settings.
Initialize: 
Initializes all  the settings  to the default  settings.
Note
Be sure  not to eject the battery pack while resetting.
When you perform  [Initialize] , downloaded applications on the product may be uninstalled.
To use these  applications again, re-install them.
The value set with [AF Micro  Adj.]  will not be reset even when [Camera Settings Reset] or
[Initialize]  is performed.
[184] How  to Use
Using Wi-Fi functionsConnecting this product and a Smartphone
PlayMemories Mobile
To use [Smart  Remote  Embedded] or [Send to Smartphone], etc., the application PlayMemories Mobile  should  be installed on your  smartphone.
Download  and install the application PlayMemories Mobile  from your  smartphone’s
application store.  If PlayMemories Mobile  is already installed on your  smartphone, be sure  to
update it to the latest version.  
For details on PlayMemories Mobile, refer to the support page (
http://www.sony.net/pmm/ ).
[185] How  to Use
Using Wi-Fi functionsConnecting this product and a Smartphone
Connecting an Android smartphone to this product
1 .  Launch PlayMemories Mobile  on your  smartphone.
2 .  Select the model name  of this product (DIRECT-xxxx: xxxx). 
						

							3.  Input the password that is displayed on this product.
The smartphone is connected to the product.
[186] How  to Use
Using Wi-Fi functionsConnecting this product and a Smartphone
Connecting the product to an iPhone or iPad
1 .  Select the model name  of this product (DIRECT-xxxx: xxxx) on the Wi-Fi setting  screen
of your  iPhone or iPad. 
						

							2.  Input the password displayed on this product.
The iPhone or iPad  is connected to the product.
3 .  Confirm  that your  iPhone or iPad  was connected to the “SSID” shown on this product.
4.  Return  to the “Home” screen  and launch  PlayMemories Mobile.
[187] How  to UseUsing Wi-Fi functionsConnecting this product and a Smartphone
Calling up an application using [One-touch(NFC)]
You can call  up a desired application from the application menu  of this product by touching
an NFC-enabled Android  smartphone to the product. If the application you call  up has a 
						

							feature that works with the smartphone, the product and the smartphone will be connected
via Wi-Fi. To use this function, register the desired application in advance.1.  MENU  → 
(Wireless)  → [One-touch(NFC)]  → desired application.
2 .  Switch  this product to shooting mode, then  touch  an NFC-enabled smartphone to the 
 (N mark) on the product for 1-2 seconds.
PlayMemories Mobile  launches  on the smartphone, and the application you have
registered  launches  on this product.
Note
When the product is in playback  mode, the registered  application will not launch  even if
you touch  the smartphone to the product.
When you call  up an application with one touch, even if that application does not work with
a smartphone, PlayMemories Mobile  on smartphone will launch. Exit PlayMemories
Mobile  without performing an operation.  If you do not exit PlayMemories Mobile, the
smartphone stays in standby  connection status.
[188] How  to Use
Using Wi-Fi functionsControlling this product using a Smartphone
Smart Remote Embedded
You can use a smartphone as the remote controller for this product, and shoot  still
images/movies.  Still images/movies shot via remote control  are  sent to the smartphone from
the product. The application PlayMemories Mobile  must be installed on your  smartphone. 1.  MENU  → 
 (Application )  → [Application List]  → [Smart  Remote  Embedded] .
2 .  When the product is ready  for the connection, an information  screen  appears on the
product. Connect the smartphone and the product using that information.
Connection setting  methods differ among smartphones.
3.  Check the composition of the image on the smartphone screen, and then  press  the 
						

							shutter button (A) on the smartphone to shoot  an image.
Use button (B) to change settings  such as [EV] , [Self -Timer]  and [Review Check] .
Note
When you record movies using a smartphone as a remote controller, the monitor of the
product becomes darker.
This product shares  the connection information  for [Smart  Remote  Embedded] with a
device that has permission to connect. If you want to change the device that is permitted
to connect  to the product, reset the connection information  by following these  steps.
MENU  → 
 (Wireless) → [SSID/PW  Reset]. After resetting the connection information,
you must register the smartphone again.
Depending on future version upgrades,  the operational  procedures  or screen  displays are
subject to change without notice.
[189] How  to Use
Using Wi-Fi functionsControlling this product using a Smartphone
One-touch connection with an NFC-enabled Android
smartphone (NFC One-touch remote)
You can connect  this product and an NFC-enabled Android  smartphone with one touch,
without performing a complex setup  operation. 1.  Activate the NFC function  of the smartphone.
2 .  Switch  this product to shooting mode.
The NFC function  is available  only when the  (N mark) is displayed on the
screen.
3 .  Touch the product to the smartphone. 
						

							The smartphone and the product are  connected, and PlayMemories Mobile  launches
on the smartphone.
Touch the smartphone to the product for 1-2 seconds until PlayMemories Mobile
launches.
About “NFC”
NFC is a technology that enables  short-range wireless communication between various
devices, such as mobile  phones or IC tags, etc. NFC makes  data  communication simpler
with just a touch  on the designated touch -point.
NFC (Near  Field Communication) is an international  standard of short-range wireless
communication technology.
Note
If you cannot  make  a connection, do as the following:
Launch PlayMemories Mobile  on your  smartphone, and then  move  the smartphone slowly  toward
the 
 (N mark) of this product.
If the smartphone is  in a case, remove it.
If the product is  in a case, remove it.
Check whether the NFC function  is  activated  on your  smartphone.
When  [Airplane  Mode] is set to [On] , you cannot  connect  this product and the
smartphone. Set  [Airplane  Mode] to [Off].
If this product and the smartphone are  connected when the product is in playback  mode,
the displayed image is sent to the smartphone.
[190] How  to Use
Using Wi-Fi functionsTransferring images to a Smartphone
Send to Smartphone
You can transfer still  images to a smartphone and view  them.  The application PlayMemories
Mobile  must be installed on your  smartphone. 
						

							1.  MENU  →  (Wireless )  → [Send to Smartphone]  → desired setting.
2 .  If the product is ready  for the transfer, the information  screen  appears on the product.
Connect the smartphone and the product using that information.
The setting  method for connecting the smartphone and the product varies depending
on the smartphone.
Menu item details
Select on This Device : 
Selects an image on the product to be transferred to the smartphone.
(1) Select from among [This Image] , [All Images on This Date] or [Multiple Images] .
The options displayed may differ depending on the View Mode  selected on the camera.
(2) If you select [Multiple Images], select the desired images using 
 on the control  wheel,
then  press  MENU  →  [Enter] .
Select on Smartphone : 
Displays all  images recorded  on the product’s memory card  on the smartphone.
Note
You can select an image size to be sent to the smartphone from [Original] , [2M]  or [VGA] . 
To change the image size, refer to the following steps. 
For Android  smartphone 
Start PlayMemories Mobile,  and change the image  size by [Settings]  → [Copy Image Size] .
For iPhone/iPad 
Select PlayMemories Mobile  in the setting  menu, and change the image  size by [Copy Image
Size] .
Some images may not be displayed on the smartphone depending on the recording
format.
RAW images are  converted to JPEG format when they are  sent.
You cannot  send XAVC S or AVCHD  format movies.
This product shares  the connection information  for [Send to Smartphone] with a device
that has permission to connect. If you want to change the device that is permitted to
connect  to the product, reset the connection information  by following these  steps. MENU
→  [Wireless]  → [SSID/PW  Reset]. After resetting the connection information, you must
register the smartphone again. 
						

							When [Airplane  Mode] is set to [On] , you cannot  connect  this product and the
smartphone. Set  [Airplane  Mode] to [Off].
[191] How  to Use
Using Wi-Fi functionsTransferring images to a Smartphone
Sending images to an Android smartphone (NFC One-
touch Sharing)
With just one touch, you can connect  this product and an NFC-enabled Android  smartphone,
and send an image displayed on the product screen  directly to the smartphone. For movies,
you can only transfer MP4 movies recorded  with [
File Format]  set to [MP4].
1 .  Activate the NFC function  of the smartphone.
2 .  Display a single image on the product.
3 .  Touch the smartphone to the product.
The product and the smartphone are  connected, and PlayMemories Mobile
automatically launches  on the smartphone, and then  the displayed image is sent to the
smartphone.
Before  you touch  the smartphone, cancel the sleep and lock-screen  functions  of the
smartphone.
The NFC function  is available  only when the  (N mark) is displayed on the
product.
Touch the smartphone to the product for 1-2 seconds until PlayMemories Mobile
launches.
To transfer two or more images,  select MENU  → (Wireless)  → [Send to
Smartphone]  to select images.  After the connection enabled screen  appears, use
NFC to connect  the product and the smartphone. 
						

							About “NFC”
NFC is a technology that enables  short-range wireless communication between various
devices, such as mobile  phones or IC tags, etc. NFC makes  data  communication simpler
with just a touch  on the designated touch -point.
NFC (Near  Field Communication) is an international  standard of short-range wireless
communication technology.
Note
You can select an image size to be sent to the smartphone from [Original], [2M] , or
[VGA] . 
To change the image size, refer to the following steps. 
For Android  smartphone 
Start PlayMemories Mobile,  and change the image  size by [Settings]  → [Copy Image Size] .
RAW images are  converted to JPEG format when they are  sent.
If the Image Index  is displayed on the product, you cannot  transfer images using the NFC
function.
If you cannot  make  a connection, perform  the following:
Launch PlayMemories Mobile  on your  smartphone, and then  move  the smartphone slowly  toward
the 
 (N mark) of this product.
If the smartphone is  in a case, remove it.
If the product is  in a case, remove it.
Confirm  that the NFC function  is  activated  on the smartphone.
When  [Airplane  Mode] is set to [On] , you cannot  connect  the product and the
smartphone. Set  [Airplane  Mode] to [Off].
You cannot  send AVCHD  format movies.
You cannot  send XAVC S format movies.
[192] How  to Use
Using Wi-Fi functionsTransferring images to a computer
Send to Computer
You can transfer images stored in the product to a computer connected to a wireless access
point or wireless broadband router and easily make  backup copies using this operation.
Before  starting this operation,  install PlayMemories Home on your  computer and register the
access point on the product. 1.  Start your  computer.
2 .  MENU  → 
(Wireless )  → [Send to Computer]. 
						

							Note
Depending on the application settings  of your  computer,  the product will turn off after
saving the images to your  computer.
You can transfer images from the product to only one computer at a time.
If you want to transfer images to another computer,  connect  the product and the computer
via a USB connection and follow the instructions in PlayMemories Home.
[193] How  to Use
Using Wi-Fi functionsTransferring images to a TV
View on TV
You can view  images on a network -enabled TV by transferring them from the product without
connecting the product and TV with a cable. For some  TVs, you may need to perform
operations on the TV. For details, refer to the operating instructions supplied with the TV. 1.  MENU  → 
(Wireless)  → [View  on TV]  → desired device to be connected.
2 .  When you want to play back images using slideshow, press  
 on the center of the
control  wheel.
To display the next/previous  image manually, press  the right/left side of the control
wheel.
To change the device to be connected, press  the bottom side of the control  wheel,
then  select [Device list].
Slideshow settings
You can change the slideshow settings  by pressing the bottom side of the control  wheel.
Playback  Selection : 
Selects the group of images to be shown.
Folder  View(Still) :
Selects from [All]  and [All in Folder] .
Date View :
Selects from [All]  and [All in Date Rng.] .
Interval: