Sony F65 Manual

61VF Menu List
  Chapter 4   Menu Configuration and Detailed Settings
4-2-7 Diagnosis Menu

Remote control 
settingsAccess Password Disabled Enabled, Disabled Sets access permissions for remote 
control over a network.
sonyf65 (Blank), String of up to 32  characters Sets the password for access via a 
network. 

Network settings 
reset Network Settings -- Execute by Enter. Resets the network settings.
PageConfiguration 
itemDefaultSettingsRemarks

Ve r s i o n  
information 
display System -- V X.xx...

62Metadata
  Appendix
Appendix
Metadata
The camera and lens metadata is output on the master 
output, and is recorded on the SR-R4. The output metadata 
is comprised by metadata in format based on SMPTE 
RDD18 and non-realtime metadata in proprietary format. 
Slate information entered using the F65Remote Look Plus 
application on a tablet device is output in non-realtime 
metadata.
The following metadata items are output.
RDD 18 format metadata set
Lens unit metadata set
Camera unit metadata set
Item...

63Metadata
  Appendix
Sony F65 camera metadata set
Shutter Speed 
(Angle)UInt32 4 81.08 Shutter angle expressed in minutes (1/60 of a 
degree).
ISO Sensitivity UInt16 2 81.0B ISO sensitivity of the camera. 
White Balance  UInt16 2 81.0E White Balance value defined by the temperature in  Kelvin.
Capture Gamma 
Equation Label 16 32.10 Gamma characteristic applied to the main video 
signal expressed by the label value registered in 
SMPTE RP 224. 
Gamma for CDL UInt8 1 81.16 Label value of gamma...

64Metadata
  Appendix
Cooke Protocol Lens metadata set
Non-realtime metadata
Monitoring Base 
CurveLabel 16 E1.0B Label value, registered in SMPTE RP 224, indicating 
the base curve when ASC CDL adjustment is added 
for the monitor video on SDI-OUT1.
Monitoring 
Descriptions UTF8 String 12 E1.09 String indicating the combined SDI-OUT1 monitor 
characteristic. 
Example for each SDI1 Look Select setting:
 ACES-Proxy10: “ACES-Proxy10”
 Graded ACES: “Graded ACES”
 Look Profile: “SonyProf1: LC_709”...

65Metadata
  Appendix
Length 4-byte length 4 Data length of second packet, excluding the Key and Length attributes.
Reel UTF8 String Variable  (8 max.)02.01 Reel number.
Scene UTF8 String Variable  (8 max.)02.02 Scene number.
Cut UTF8 String Variable  (8 max.)02.03 Cut number.
Take UTF8 String Variable  (8 max.)02.04 Take number.
Shot UTF8 String Variable  (8 max.)02.05 Shot number.
Camera Index UTF8 String Variable  (8 max.)02.06 Index used to indentify the camera used for shooting.
Item nameData...

66Warning/Error Messages
  Appendix
Warning/Error Messages
If the battery voltage drops or an error is detected when 
power is applied or during operation, the corresponding 
indicator lights up/flashes and a message appears on the 
subdisplay. The error details are displayed in the self-
diagnostics on settings page 3 on the subdisplay and in the 
viewfinder.
Warnings and error messages occurring on the SR-R4 are 
also displayed in the self-diagnostics field. 
For details about SR-R4 messages, refer to...

67Warning/Error Messages
  Appendix
DIAGNOSIS: Lit red
DOCK: Not litWarning Optical Level No Input No signal is input on the Recorder connector. 
DIAGNOSIS: Lit red Warning CRCC Error occurred A Cyclic Redundancy Check Code (CRCC) error  occurred with the Recorder connector. Clean the 
recorder connector.
If the error continues, even after cleaning, consult your 
local Sony representative.
DIAGNOSIS: Lit red Displays same  message as self 
diagnostics field in a 
dialog.SR-R4 version 
mismatch
SR-R4...

68Precautions
  Appendix
Precautions
Use and storage
Do not subject the unit to severe shocks
The internal mechanism may be damaged or the body 
warped.
Do not block the ventilation holes
If the ventilation holes are blocked, not only are the 
characteristics not guaranteed, but also extreme 
degradation of the internal parts will likely result, causing 
defects of the camera.
For the locations of the ventilation holes, see the figures in 
“1-3 Locations and Functions of Parts” (page 12).
After use...

69Cleaning the Recorder Connector / About “Memory Stick Duo”
  Appendix
Cleaning the Recorder 
Connector
Before cleaning the recorder connector, always check that 
the power supply is disconnected before proceeding.
If the recorder connector is dirty, there is increased risk of 
errors in the data transmission between the camera and the 
SR-R4. The recorder connector should be cleaned if any of 
the following conditions occurs.
 DOCK indicator is lit yellow or red.
 DIAGNOSIS indicator is lit red and...

70About “Memory Stick Duo”
  Appendix
inserting the “Memory Stick Duo,” and then try inserting it 
again.
To remove a “Memory Stick Duo”
Confirm that the access lamp is not flashing red, then 
lightly push in the “Memory Stick Duo” to release the 
lock.
If the access lamp is flashing red, data is being read from 
or written to the “Memory Stick Duo” At this time, do not 
shake the product or subject it to shock. Do not turn off the 
power to the product or remove the “Memory Stick Duo.” 
Doing so may...