Sony F65 Manual

41Viewing and Setting the Viewfinder Display
  Chapter 3   Basic Adjustments and Settings
3-7-3 Setting the Voltage Warning 
Va l u e s
The Near End and End values used to issue battery voltage 
warnings when the supply voltage drops are set on the 
 page in the Config menu. 
Two Near End and End values can be saved, and you can 
switch between them as required. 
 page
3-7-4 Magnifying the Image Display
The image output on the SDI OUT2 connector and in the 
viewfinder can be magnified by assigning the...

42Restoring the factory default settings
  Chapter 3   Basic Adjustments and Settings
3-7-5 Monitoring High Key Blown-
out Highlights and Low Key Clipped 
Blacks
Blown-out highlights and clipped blacks in the output 
image on the SDI OUT2 connector can be monitored using 
an ASSIGN button assigned with the Hi/Lo Key function. 
The image switches between high-key monitoring 
(reduced gain), low-key monitoring (increased gain), and 
normal settings each time the ASSIGN button is pressed. 
When the image...

43
  Chapter 4   Menu Configuration and Detailed Settings
Chapter
Subdisplay Menu List
4
Menu Configuration and 
Detailed Settings
4-1 Subdisplay Menu List
This section describes the menu list displayed on the 
subdisplay. 
ItemDefaultSet or display valueRemarks
Settings page 1
Video format FPS N/A S47.95p, S48p: 1 to 48
S59.98p, S60p:
1 to 60
S119.88p, S120p: 1 to 120 When using the mechanical rotary 
shutter, the minimum value is 8.
Frame rate 23.98p F65RAW mode: 23.98p, 24p, 29.97p, 25p, 50p,...

44Subdisplay Menu List
  Chapter 4   Menu Configuration and Detailed Settings
ND filter Clear F65RAW mode, HD mode:Clear, 0.9, 1.2, 1.5, 1.8, Close, 
Mainte
F65RAW-HFR mode:
Clear(HFR), Close, Mainte Close: Filter closed (display only)
Mainte: Maintenance mode, with no 
filter deployed (display only). 
Switched using the VF menu.
Sensitivity (Cine mode: EI 
value, Custom mode: dB 
value) Cine mode: 
800EI
Custom mode: 
0dBCine mode: 
200EI, 250EI, 320EI, 400EI, 
500EI, 640EI, 800EI, 1000EI, 
1250EI,...

45Subdisplay Menu List
  Chapter 4   Menu Configuration and Detailed Settings
Subdisplay brightness 4 1 to 4
Self diagnostics (display only) N/A OK, Warning/error message Displays self-diagnostics results. A message is displayed if an error occurs.
For details, see “Warning/Error 
Messages” (page 66). 
ItemDefaultSet or display valueRemarks 

46VF Menu List
  Chapter 4   Menu Configuration and Detailed Settings
4-2 VF Menu List
This section describes the VF menu items displayed in the 
viewfinder or on a monitor. 
The items displayed in a web browser or on a tablet device 
are basically the same as the VF menu, with one exception. 
The item not displayed on these devices is noted in the 
following table. 
The VF menu has the following structure. 
Note
MenuSetting
Camera Sets the camera’s basic functions and image recording settings. 
VF/SDI...

47VF Menu List
  Chapter 4   Menu Configuration and Detailed Settings
4-2-1 Camera Menu
PageConfiguration 
itemDefaultSettingsRemarks

Signal format 
settings RAW/HD F65RAW F65RAW, HD, 
F65RAW-HFRSets the recording mode.
Frame Rate 23.98p F65RAW mode: 23.98p, 24p, 29.97p, 25p, 
50p, 59.94p, S47.95 
(23.98p), S48 (24p), 
S59.94p (23.98p), 
S59.94p (29.97p), S60p 
(24p), S60p (25p)
HD mode (4:4:4 RGB): 23.98p, 29.97p, 24p, 25p, 
S59.94p (23.98p), 
S59.94p (29.97p), S60p 
(24p), S60p (25p)
HD mode (4:2:2...

48VF Menu List
  Chapter 4   Menu Configuration and Detailed Settings

Basic settingsShoot Mode Cine Cine, Custom Cine: This mode is used to adjust and 
check the LUT and Color for the VF/
SDI output signals without processing 
the main image signal (color grading 
is performed in post-production). 
Custom: This mode adjusts the main 
image signal on-location. 
Color Space S-Gamut S-Gamut, F900 Selects the colors reproducibility. It is  fixed to S-Gamut in F65RAW mode.
S-Gamut: This mode enables...

49VF Menu List
  Chapter 4   Menu Configuration and Detailed Settings

Shutter step 
settingsStep 1 360.0 4.2 to 360.0 Registers the shutter angles for each 
step.
Step 2 270.0
Step 3 180.0
Step 4 172.8
Step 5 150.0
Step 6 144.0
Step 7 90.0
Step 8 45.0
Step 9 22.5
Step 10 11.2
Add -- Execute by Enter. Adds a shutter step value.
Delete -- Execute by Enter. Deletes a shutter step value.
Preset -- Execute by Enter. Restores the shutter step values to 
factory default values.

Video settings Master Gain 0dB...

50VF Menu List
  Chapter 4   Menu Configuration and Detailed Settings

Color bar and 
test signal 
settingsColor Bar Off On, Off Turns the output of color bars On/Off. 
Test Signal Off Off, Saw, Step Sets the test waveform output. 
PageConfiguration 
itemDefaultSettingsRemarks