Sony DPP FP60BT User Manual

							31 GB
Printing from a PictBridge camera or external device
Printing from an
external device
You can connect a mass-storage-complaint
digital camera, a USB memory, a photo
storage device, or other external device
and print an image directly from the
external device.
Notes
• We cannot guarantee connection with all
types of mass storage devices.
• If a memory card is inserted in the printer, the
printer cannot read the signal from an
external device connected to the PictBridge
connector of the printer. Remove the memory
card, if any.
1Set your digital camera or other
external device ready for printing
with the Mass Storage-compliant
printer.
The settings and operations that are
necessary before connection differ
depending on the external device you
use. For details, see the operating
instructions of the external device. (In
case of Sony Cyber-shot digital
camera, for example, select “Normal”
mode or “Mass Storage” mode for the
“USB Connect”. )
2Connect the printer to the AC
power source ( . Read This
First).
3Press  1 (on/standby) switch to
turn on the printer.
The  1 (on/standby) indicator of the
printer lights in yellow green.
4Connect a camera or an external
device to the PictBridge connector
of the printer.
Use the USB cable supplied with the
digital camera or other external
device, if necessary.
Printing in the direct mode is
possible.
Notes
• If you use a commercially available USB
cable, please use the one shorter than 3m in
length.
• While the access indicator of the external
device is flashing, never turn off the power of
the printer or an external device nor remove
the USB cable.  The data inside the external
device may be damaged. We cannot
guarantee any damages that may be caused
by data loss or damage.
• You cannot use a USB hub or a USB device
equipped with a USB hub.
• Encoded or compressed date by fingerprint
authentication or password cannot be used.
• The following Sony USB devices cannot be
used since they contain fingerprint
authentication system or a USB hub:
USM16A/S, USM32A/S, USM64A/S,
USM128A/S,USM256A/S, USM128B/BMS,
USM64C, USM128C, USM128F Mass-storage-compliant
USB memory, digital
camera, photo storage
device, or other external
device.
To PictBridge connector
To USB
connector
Downloaded From ManualsPrinter.com Manuals 
						

							32 GB
Printing from a PC
You can print the images from a PC by
installing the supplied software on your
PC and connecting it to the printer.
This section explains how to install the
supplied software on your PC and how to
use the supplied Picture Motion Browser
software to print an image.
Please also refer to the operating
instructions supplied with your PC for
operating the PC.
Installation of the software is necessary
only when you connect the printer to your
PC for the first time.
On the supplied CD-ROM
The supplied CD-ROM contains the
following software:
•Printer driver for DPP-FP60:  The
software describes the printer’s
requirements and enables printing from
the PC.
• Picture Motion Browser:   Sony’s
original software application that allows
you to handle photographs and moving
images—capturing, managing,
processing, and printing.
Installing the software
System requirements
To use the supplied printer driver and
Picture Motion Browser, your PC must
meet the following system requirements:
OS: Microsoft  Windows Vista (
*1)/
Windows XP Professional (*2)/
Windows XP Home Edition/
Windows 2000 Professional (Service
Pack 3 or later), pre-installed
(*1 ) Excluding Starter. In addition, the Picture Motion Browser does not
support the 64-bit version.
(*2 ) The 64-bit version is not supported.
(Windows 95, Windows 98 Gold
Edition, Windows 98 Second Edition,
Windows NT, Windows Millennium
Edition, other versions (ex. SP2 or
former, or Server) of Windows 2000
are not supported.)
CPU: Pentium III 500MHz or faster (Pentium III 800MHz or faster is
recommended.)
RAM: 128 MB or more (256 MB or more is recommended.)
Hard disk space: 200 MB or more (Depending on the Windows version
you use, more space will be required.
To handle image data, you will need
additional hard disk space.)
Display: Screen resolution: 800 x 600 pixels or more
Colors:
High Color (16-bit) or more
Required software: DirectX 9.0c or higher (Required for the Picture Motion
Browser.)
Downloaded From ManualsPrinter.com Manuals 
						

							33 GB
Printing from a PC
Notes
• If a hub is used to connect the printer and
your PC, or if two or more USB devices
including other printers are connected to your
PC, a trouble may occur.  If this occurs,
simplify the connections between your PC
and the printer.
• You cannot operate the printer from another
USB device being used simultaneously.
• Do not remove the USB cable from or connect
it to the printer during data communication
or printing.  The printer may not work
properly.
• Do not allow the PC connected to the printer
to switch to standby mode or hibernation
mode during printing. If you do so, the
printer may not print properly.
• We cannot guarantee operations with all PCs,
even though they may meet or exceed the
system requirements.
• Picture Motion Browser supports the DirectX
technology and the DirectX installation may
be required.
DirectX is available in the CD-ROM.
• If the Picture Motion Browser is installed on a
PC on which the Cyber-shot Viewer is
already installed, the Cyber-shot Viewer will
be overwritten and replaced by the Picture
Motion Browser. The browsing folders once
registered in the Cyber-shot Viewer will be
automatically registered in the Picture Motion
Browser. When using the Picture Motion
Browser, you can view the folders easier than
you can when using the Cyber-shot Viewer,
as the registered folders are displayed by
group when viewing folders. With its
improved red-eye reduction adjustment and
newly-added tone curve adjustment, the
Picture Motion Browser also offers more
powerful editorial features. You can also use
the software to write data into an external
memory card for taking it outside.Installing the printer driver 
Follow the procedures below to install the
driver.
Notes
• Before installing the driver, do not connect
the printer to the PC .
• When using the Windows Vista/XP/2000, log
on to Windows as a  “Computer
administrator” user account.
• Be sure to close all running programs before
installing the software.
• The dialog boxes in this section are those in
Windows XP, unless otherwise specified.  The
installation procedures and the dialog boxes
shown differ depending on the operating
system.
1Turn on your PC, start Windows,
and insert the supplied CD-ROM
into the CD-ROM drive of your PC.
The installation window is displayed.
Note
In case the installation window is not
automatically displayed, double-click the
“Setup.exe” of the CD-ROM.
2Click “Installing Printer Driver”.
3Click “Next”.
The license agreement dialog box is
displayed.
4Read the agreement thoroughly,
and if you agree, check “I accept
this agreement” and click “Next”.
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							34 GB
The setup starts.
5When “Sony DPP-FP60/70/90
printer driver has been
successfully installed.” dialog is
displayed, click “Finish”.
6Connect the printer to the AC
power source (. Read This
First).
7Press  1 (on/standby) switch to
turn on the printer.
8Connect the USB connectors of
the printer and your PC with a
USB cable (not supplied).
Printer driver installation starts
automatically.
To USB
connector
Windows PC To USB
connector
Note
Use a B-type USB cable shorter than 3m in
length.
9Wait for a while, then check to
see that “Sony DPP-FP60” is
added to the “Printers and
Faxes”.
10When the installation is complete,
remove the CD-ROM from your PC
and keep it for future use.
To continue to install the Picture
Motion Browser software, follow the
procedures from step 2 on page 35.
Notes
• If the installation fails, remove the printer
from your PC, restart your PC, and then do
the installation procedures from the step 2.
• After installation, the “Sony DPP-FP60” is not
set as the default printer.  Set the printer you
use for each application.
• The supplied CD-ROM will be required when
you uninstall or re-install the printer driver.
Keep it in good order for possible future use.
• Before you use the printer, read the Readme
file (the Readme folder of the CD-
ROM cEnglish folder cReadme.txt).
When the software is installed
The 
 is displayed on the Windows
desktop, as well as a shortcut to the web
site for printer customer registration.  If
you finish registration, you can find
support information at:
http://www.sony.net/registration/di/
Downloaded From ManualsPrinter.com Manuals 
						

							35 GB
Printing from a PC
Uninstalling the printer driver
Remove the printer driver as follows:
1Disconnect the USB cable (not
supplied) from your printer and
the PC.
2Click “Start” - “Printers and
Faxes”.
3Select “DPP-FP60”, and click
“Delete” from the “File” menu.
The confirmation dialog box is
displayed.
4Click “Yes”.
5Check to see that “DPP-FP60” is
removed from the “Printers and
Faxes” window.
6Click ”Server Properties” from the
“File” menu, and click “Drivers”
tab in the “Printers Server
Properties” window.
7Select “Sony DPP-FP60” from the
list box and click “Remove”.
The confirmation dialog box is
displayed.
When using the Windows Vista,
deletion may not be possible. You can
safely leave it as it is.
8Click “Yes”.
9Click “Close” to close the “Printers
Server Properties” window.
10Click “Start” - “Control Panel”.
The Control Panel window is
displayed.
11Open “Add or Remove
Programs.”
12Select “Windows Driver Package –
Sony DPP-FP60/70/90” and click
“Change/Remove”.
The confirmation dialog box is
displayed.
13Click “Yes”.
Installing the Picture Motion
Browser
Follow the procedures below to install the
Picture Motion Browser.
Notes
• When using the Windows Vista/XP/2000, log
on to Windows as a  “Computer
administrator” user account.
• Be sure to close all running programs before
installing the software.
• The dialog boxes in this section are those in
Windows XP, unless otherwise specified.  The
installation procedures and the dialog boxes
shown differ depending on the operating
system.
1Turn on your PC, start Windows,
and insert the supplied CD-ROM
into the CD-ROM drive of your PC.
The installation window is displayed
(page 33).
2Click “Installing Picture Motion
Browser”.
The “Choose Setup Language” dialog
box is displayed.
3Select your language and click
“Next.”
The “Location settings” dialog box is
displayed.
4Select the “Region” and
“Country/Area” where you use
the printer and click “Next.”
The “InstallShield Wizard” dialog box
is displayed.
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							36 GB
5Click “Next.”
The license agreement dialog box is
displayed.
6Read the agreement thoroughly,
and if you agree, check “I accept
the terms of the license
agreement” and click “Next”.
The dialog box used to specify the
destination location is displayed.
7Check the destination and then
click “Next”.
The “Ready to Install the Program”
dialog box is displayed.
8Click “Install” and follow the
instructions on the screen to
proceed with installation.
When you are prompted to restart
your PC, follow the displayed
instructions to restart it.
9When the installation is complete,
remove the CD-ROM from your PC
and keep it for future use.
Notes
• If the installation fails, perform the
installation procedures from step 2 again.
• The supplied CD-ROM will be required when
you uninstall or re-install the Picture Motion
Browser.  Keep it in a safe place for possible
future use.
Uninstalling the Picture Motion
Browser
When this software is no longer needed,
remove it from your PC as follows:
1Click “Start” - “Control Panel”.
2Open “Add or Remove
Programs.”
3Select “Sony Picture Utility” and
click “Change/Remove” .
The software uninstallation starts.
4Click “Finish”.
Downloaded From ManualsPrinter.com Manuals 
						

							37 GB
Printing from a PC
2Click “Start”.
The main window of the Picture
Motion Browser is displayed.
To switch the display of the main
window
There are 2 different versions of photo
view used in the main window as
follows:
To switch the view, click the tab
“Folders” or “Calendar.”
•“Folders” view
The images will be classified in each
registered folder and are displayed
as thumbnails.
• “Calendar” view
The images will be classified
according to the shot date and are
displayed as thumbnails on each
date of the calendar. In “Calendar”
view, you can switch the display
according to the year, month, or
hour.
In this section, “Folders” view
windows are used as examples.
Printing photos from
the Picture Motion
Browser
You can use the Picture Motion Browser to
print an image from your PC using P size
print paper.
1Start the Picture Motion Browser
window using either of the
following methods:
• Double-click  (Picture Motion
Browser) on the Windows desktop.
• Click “Start” - “All Programs” (or
“Programs” with Windows 2000) -
“Sony Picture Utility” - “Picture
Motion Browser.”
The “Information Tool” window is
displayed.
When the Picture Motion Browser is
started for the first time
The dialog box to register a viewed
folder is displayed. If images have
already been saved in the “My
Pictures” folder, click “Register
Now.”
If you have saved images in a folder
other than the “My Pictures” folder,
click “Register Later.”  Refer to  ”To
register a browsing folder” (page 41).
How to access the “My Pictures”
folder
• In Windows 2000:
Click “My Documents” - “My
Pictures” on the desktop.
• In Windows Vista/XP:
Click “Start” - “My Pictures” from
the taskbar.
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							38 GB
•Print date taken: When
checked, an image is printed
with the date of shooting if the
image is a file recorded in the
DCF (Design rule for Camera
File system) format.
Properties
Specifies paper size, orientation,
and other details.
6To set the paper orientation or
other print options, click
“Properties”.
The “Properties” dialog box of the
selected printer is displayed.  The
printer driver of the printer utilizes
the Universal Printer Driver, a
Microsoft common printer driver . In
the dialog boxes, there are some items
that are not used in the printer.
7In the “Layout” tab, specify the
paper orientation or other
options.
3Click the folder containing the
photos you want to print.
As an example, the “sample” folder is
selected in the following explanation.
4Select the photos that you want
to print and click 
 (print).
The Print dialog box is displayed.
5In the “Printer” drop-down list
box, select “Sony DPP-FP60”. To
set the paper orientation or other
print options, go to step 6. To
print, skip to step 11.
Items Functions
Printer Settings
• Printer: Select the printer youare using: “Sony  DPP-FP60”
• Paper size: To change the size,
click “Properties”.
Note:  In some regions, L size
print paper is not sold.
Print Options •Zoom the image until the print
area is full: When checked, an
image will be printed over the
entire printing area of the
paper. An  edge of the photo
may be cut.
When unchecked, an image
will be printed without cutting
off.
Downloaded From ManualsPrinter.com Manuals 
						

							39 GB
Printing from a PC
Items Functions
Paper/Output•Paper Size: From the drop-
down list box, select the paper
size you actually use for
printing: P  size (post card
size)/L size
Note:  L size print paper is
not sold in some regions.
• Copy Count: Specify the
number of copies to be
printed.
Graphic - Image Color Management
•ICM Method: The printer does
not support the ICM method
settings. Even when you select
an option other than “ICM
Disabled”, the printed results
do not reflect the setting.
Leave the option as it is.
• ICM Intent: The printer does
not support the ICM Intent
settings. Leave the option as it
is.
Document Options
•Advanced Printing Features:
Select “Enabled” to turn on
advanced printing options
such as “Page Order”.  If a
compatibility problem occurs,
disable this feature.
• Color Printing Mode: To print
in colors, select “True Color
(24bpp)”. To print in
monochrome, select
“Monochrome”.
For details, see the Windows
help.
Items Functions
Orientation Select the orientation of an
image when printed:
•Portrait
• Landscape
Page Order
Select the order of the pages
when printed:
•Front to Back
• Back to Front
Pages Per Sheet
Specify the number of copies
per sheet to be printed.
Select “1”.
AdvancedSpecifies the paper size or other
options.
8Click “Advanced”.
The “DPP-FP60 Advanced Options”
dialog box is displayed.
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							40 GB
Items Functions
Printer Features•Borderless Print: To print an
image without borders, select
“ON”. To print with borders,
select  “OFF”. Depending on
the  application software, an
image will be printed with
borders even if “ON” is
selected. Set an image to be
printed fully in the print
range.
9In the “Paper/Quality” tab, specify
the color or paper source.
       
Items Functions
Tray Selection From the “Paper Source” drop-
down list box, elect
“Automatically Select”.
ColorTo print in colors, select
“Color”. To print in
monochrome, select “Black &
White”.
AdvancedThe “DPP-FP60 Advanced
Options” dialog box is
displayed. (page 39)
For details, see step 8.
10Click “OK”.
The  “Print” dialog box is displayed
again.
11Click “Print”.
Printing starts. For the details of the
properties of the Picture Motion
Browser, see the Picture Motion
Browser help.
Note
You cannot print a motion-picture file or RAW
data files.
Tips
• To select serial still images in the image area
of the main window, click the first image in
the series and then click the last image while
pressing the Shift key.
To select multiple still images not in a
sequence, click the images individually while
pressing the Ctrl key.
• You can also print from an image preview.
Downloaded From ManualsPrinter.com Manuals