Sony DPP FP60BT User Manual

							11 GB
Making various printing
                  Cursor                    Edit menu
Items      Procedures
/Increases or reduces the
size of an image by
pressing the buttons on the
printer.
Moves an image.
Rotates an image.
Adjusts the picture quality
of an image.
Adds an filter to an image.
Corrects the red-eye
phenomenon.
Undoes the editing just
done and resets the image
to the status before editing.
Saves the edited image.
Exits the Edit menu.
Tip
You can set part of the Print setup menu items
from MENU while editing an image.
Enlarging and reducing an
image size
1Display the Edit menu.
2Press  (zoom in) to enlarge an
image or 
 (zoom out) to reduce
the size of it.
Each time you press the button, the
image becomes larger or smaller:
 :  up to 200%
 :  up to 60%
Note
The picture quality of an enlarged image may be
deteriorated depending on its size.
Moving an image
1Display the Edit menu.
2Press  g/G  to select  (Move) and
then press ENTER.
The  g/G /f /F  appears on the right/
left/above/down the image and you
can move the image.
3Move the image with  g/G /f /F .
The image moves to the selected
direction.
4Press ENTER.
The image is fixed to the position.
Tip
To print the image previewed, press PRINT
(page 14).
Downloaded From ManualsPrinter.com Manuals 
						

							12 GB
Rotating an image 
1Display the Edit menu (page 11).
2Press g/G  to select  (Rotate)
and then press ENTER.
The Rotate menu is displayed.
                       Rotate icon         Rotate menu
3Press  f/F to select the direction
to rotate the image and then
press ENTER.
• Rotate 90° Clockwise:  Each time
you press ENTER, the image rotates
90° clockwise.
• Rotate 90° Counterclockwise:
Each time you press ENTER, the
image rotates 90° counterclockwise.
Tip
To print the image previewed, press PRINT
(page 14).
Adjusting an image
1Display the Edit menu (page 11).
2Press  g/G  to select  (Adjust)
and then press ENTER.
The Adjust menu is displayed.
                               Adjust icon      Adjust menu
3Press  f/F  to select the desired
adjustment tool and press ENTER.
The adjustment slider appears.
          When “Brightness” is selected.
                            Adjustment slider
4Move the slider to the desired
position to adjust the level.
• Brightness:  Press G to brighten the
picture or  g to darken it.
• Tint:  Press  G to make the picture
bluish or  g to make it reddish.
• Saturation:  Press G to deepen the
colors or  g to lighten the colors.
• Sharpness:   Press G to sharpen the
outlines or  g to soften them.
5Press ENTER.
The adjustment takes effect.
Tip
To print the image previewed, press PRINT
(page 14).
Downloaded From ManualsPrinter.com Manuals 
						

							13 GB
Making various printing
Continued
Adding a special filter to an
image
1Display the Edit menu (page 11).
2Press g/G  to select  (Filter) and
then press ENTER.
The Filter menu is displayed.
              Filter menu         Filter icon
3Press  f/F  to select the desired
filter you want to add to the
image.
• Sepia: Changes the image like an
old photograph with faded colors.
• Monochrome: Changes the image
into a black and white picture.
• Paint: Makes the image look like a
painted picture.
• Fish-eye: Makes the image look like
a photo taken with a fish-eye lens.
• No Filter: No special filter on the
image (default setting).
4Press ENTER.
The filter takes effect.
Tip
To print the image previewed, press PRINT
(page 14).
Correcting the red-eye
phenomenon
You can correct the red-eye phenomenon
of a subject shot using a flash.
Note
If you perform additional editing, such as
enlarging, reducing the image size,
rotating or moving an image, after the red-
eye correction adjustment, the red-eye
correction may not take effect.  Perform
the red-eye correction after these editorial
operations.
1Display the Edit menu (page 11).
2Press  g/G  to select  (Red-eye
correction)  and then press ENTER.
The adjustment frame appears on the
image, which indicates the range for
red-eye correction adjustment.
                Adjustment frame
3Adjust the position and size of the
adjustment frame.
Make the red-eye correction
adjustment for the right and left eyes
separately.
To move the adjustment frame
1 Press  g/G  to select  (Move) and
press ENTER.
2 Move the frame with  g/G /f /F .
The frame moves in the selected
direction.
Downloaded From ManualsPrinter.com Manuals 
						

							14 GB
3Press ENTER.
The frame is fixed in the current
position.
To change the size of the
adjustment frame
Press  g/G  to select 
 (Enlarge) or
 (Reduce) and press ENTER.
Each time you press ENTER, the
frame becomes larger or smaller.
You can also enlarge or reduce the
size by pressing  
 (zoom in)  or 
(zoom out) buttons on the printer.
Tip
Make the size of the adjustment frame two
to seven times as large as the eye size.
4Press  g/G  to select  and press
ENTER.
The range of red-eye correction
adjustment is enlarged.
5Press ENTER.
The adjustment takes effect.
The Red-eye correction menu is
displayed.
To make a red-eye correction
adjustment for other eyes, repeat
steps 3 to 5.
6Press  g/G  to select  and press
ENTER.
The Edit menu is displayed again.
To reset the adjustment
Press CANCEL in step 5 instead of
ENTER.  The red-eye correction
adjustment is canceled and the window of
step 2 is displayed.
Tip
To print the image previewed, press PRINT
(page 14).
Printing an edited image
1Press PRINT.
The dialog box to specify the print
quantity is displayed.
2Press  f/F  to increase or decrease
the print quantity.
• To increase the print quantity one
by one, press  f repeatedly.
• To reduce the print quantity one by
one, press  F briefly repeatedly.
• To reset the print quantity to 1,
press  F for more than two seconds. 
3Press PRINT to start printing.
The image previewed is printed.
Saving an edited image
When you select  (save) in the Edit or
Creative Print menu, the dialog box to
select the destination to save the image is
displayed. You can save the image under a
new image number. 
Tip
The selected image will not be overwritten.
1Select the destination to save an
image.
Press  f/F  to select the media
(“Memory Stick”,  or “SD Card”) and
press ENTER.
Downloaded From ManualsPrinter.com Manuals 
						

							15 GB
Making various printing
The dialog box for setting date is
displayed. You can save the date with
the image.
2Set date.
Press f/F  to select the number and
press  g/G  to select the day, month or
year.  Then press ENTER.
The edited image by the Edit or
Creative Print menu is saved as a new
image.  The dialog box to notify the
new image numbers (folder number-
file number) is displayed.
3Press ENTER.
Note
While saving the image, do not turn off the
printer or remove a memory card from the
printer.  The memory card may be damaged.
Making a Creative
Print
With images saved in a memory card or an
external device, you can make the
following prints:
Menu You can make...
Layout Print A print with 2/4/9/13/16 split images.
Calendar Calendars with yourfavorite images.
Displaying the Creative Print
menu
Buttons to be used in Creative Print
g/G /f /F/ ENTER
PRINT
CANCEL
MENU
1Press MENU.
The menu bar is displayed.
         Creative Print menu icon     Menu bar
To exit the menu mode
Press MENU again.  The previous
window is displayed.
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							16 GB
Making layout prints
You can make a print
with 2-split, 4-split, 9-
split, 13-split, or 16-
split images.
1Display the Creative Print menu.
2Press g/G  to select “Layout print”,
then press ENTER.
The layout print templates are
displayed.
3Press  g/G  to select the desired
template, then press ENTER.
The preview of the selected template
is displayed.
                       Image area
Tip
You can select and set each area in any
order.
2Press  g/G  to select  (Creative
Print) and then press ENTER.
The Creative Print  menu is displayed.
To undo the operation midway
Press CANCEL.  The window of the
previous step is displayed.  Depending on
the step, you cannot undo the operation.
Tip
You can press MENU while making a Creative
Print and set part of the Print setup menu items.
To exit the Creative Print menu
• Press MENU in the middle of the
operations and select “Creative Print
Complete”.
To return to the Creative Print Menu
• Display the preview image and then
press  g/G /f /F  to select 
 and press
ENTER.
The dialog box for saving an image may
be displayed (page 14).
Downloaded From ManualsPrinter.com Manuals 
						

							17 GB
Making various printing
Continued
4Press g/G /f /F  to select the
desired image area and press
ENTER.
The window for selecting an image is
displayed.
5Press  g/G /f /F  to select the
desired image, and then press
ENTER.
The window used for adjusting the
image position is displayed.
                                       Adjustment tools
6Adjust the size and position of the
selected image.
Press  g/G  to select the desired
adjustment item, then press ENTER.
 Items    Procedures
/Increases or reduces the size of
an image by pressing the
buttons on the printer.
Move the image  with  g/G /
f /F , and then press ENTER.
Each time you press ENTER,
the image rotates 90°
clockwise.
7Press  g/G  to select   and press
ENTER.
The selected image is added to the
image area. When you select a
template with multiple images, repeat
the steps 4 through 7 to select an
image for each area.
Tip
To save or print the layout images previewed,
see page 14.
Making a calendar
You can make calendars
with your favorite
images.
1Display the Creative Print menu
(page 16).
2Press  g/G  to select “Calendar”,
then press ENTER.
The window used for selecting the
calendar 
template, is displayed.
3Press  g/G  to select the desired
template, and then press ENTER.
The preview of the selected template
is displayed.
Downloaded From ManualsPrinter.com Manuals 
						

							18 GB
            Image area         Calendar area
Tip
You can select and set an image area or
calendar area in any order.
4Select an image.
When you select a template with
multiple images, repeat the
procedures below to select an image
for each area.
1 Press  g/G /f /F  to select an image
area, then press ENTER.
The image list is displayed.
2 Press  g/G /f /F  to select the
desired image, then press ENTER.
The window used for adjusting the
image angle and position is
displayed. For information on
adjustment, see step 6 on page 17.
3 Press  g/G  to select 
 and then
press ENTER.
The image is selected and displayed
in the relevant  area.
5Set the calendar.
1 Press   g/G /f /F  to select the
calendar area and press ENTER to
display the calendar setting
window.
2 Press   f/F  to select the following
items and then press  g/G  to select
an option.
Item     Procedures
Start Y/M Set the first month and the year
starting the calendar.  Press  g/G
to select the month or year and
press  f/F  to set the number.
Press ENTER.
Start Day Set the day of the week (placed
furthest left in the calendar).
Press  f/F  to select “Sunday” or
“Monday”. Then press ENTER.
Color of Day Set the color of Sunday and
Saturday to be displayed in the
calendar.  Press  G and then  f/F
to select the desired color for
Sunday and Saturday.  Then press
ENTER.
3 Press  g/G /f /F  to select  and
then press ENTER.
The calendar is displayed in the
calendar area.
Tip
To save or print the calendar previewed, see
page 14.
Downloaded From ManualsPrinter.com Manuals 
						

							19 GB
Making various printing
Viewing a slideshow 
You can perform a slideshow of the
images saved in a memory card or an
external device. You can also  manually
print an image being displayed.
Buttons to be used in this section
g/G /f /F/ ENTER
PRINT
CANCEL
MENU
1Press MENU.
The menu bar is displayed.
         Menu bar         Slideshow menu icon
To exit the menu mode
Press MENU again.  The previous
window is displayed.
2Press  g/G  to select  (Slideshow)
and then press ENTER.
The Slideshow menu is displayed.
                 Slideshow menu
3Press  f/F  to select “Switch”,  and
then press ENTER.
The window to specify the way how
images are switched is displayed.
4Press  f/F  to select “Automatic” to
switch images automatically or
“Manual” to switch them
manually. Then press ENTER.
5Press  f/F  to select “Execute”, and
press ENTER.
• When “Automatic” is selected:  The
images in the memory card or an
external device are displayed
automatically one after another.
• When “Manual” is selected:
The image with the cursor in the
image list  is displayed.  To switch
images, press  g/G /f /F .
To stop slideshow
Press CANCEL.
Tip
While playing the slideshow manually, you can
print a displayed image by pressing PRINT.
Notes
• Depending on the image, it may take time to
be displayed.
• You cannot display the images that are not
displayed as thumbnails because they are
damaged or for some other reason.
Downloaded From ManualsPrinter.com Manuals 
						

							20 GB
3Press f/F  to select the search key
and press ENTER.
The dialog box used for specifying
the criteria for searching is displayed.
4Press  g/G  to select an item and
press  f/F  to specify numbers.
• When you select “By File No.”:
Specify the starting and ending
numbers of the files (folder and file
numbers) that you want to search for:
           Starting image         Ending image
                   number                   number
Tip
The above screen is when a Sony Cyber-
shot digital camera is connected.
• When you select “By Date”:
Specify the starting and ending
dates of the files that you want to
search for:
               Starting date         Ending date
Tip
To search for images of a specific day,
enter the same date in both the boxes.
Searching for an image
The Search menu allows you to search a
memory card or an external device for an
image by image number or date.
Note
You can search for the images saved as DCF
files only.
Buttons to be used in this section
g /G /f /F/ ENTER
CANCEL
MENU
1Press MENU.
The menu bar is displayed.
        Image Search menu icon
To exit the menu mode
Press MENU again.  The previous
window is displayed.
2Press  g/G  to select  (Image
Search) and then press ENTER.
The Image Search menu is displayed.
                                  Image Search menu
Downloaded From ManualsPrinter.com Manuals