Sony DPP FP60BT User Manual

							21 GB
Making various printing
•When you select “By Folder No.”:
Specify the folder number of the
images you want to search for:
5Press ENTER.
Searching starts.  When the search is
complete, the search results will be
displayed.
If no images have been found
“No images were found” will be displayed.
6Press ENTER.
The searched image is displayed.
The searched results are displayed as
the status  before you entered the
menu. When you searched from the
image list, “01” will be displayed with
the relevant images in the image list.
•If you selected “By File No.” and
“By Date”, “01” is displayed on the
images found to indicate their print
quantity. You can easily check the
images you selected on the image
list.
• If you selected “By Folder No.”, the
first or last image in the selected
folder is displayed.
Tip
To print a searched image, press  g/G /f /F  to
select the desired image and then press ENTER
to display it in the image preview.  Press  f/F  to
set the print quantity and then press PRINT to
start printing.
Filing images
Buttons to be used in this section
g /G /f /F/ ENTER
CANCEL
MENU
Deleting selected images
You can select and delete images on a
memory card.
1Press MENU.
The menu bar is displayed.
      Menu bar            File operation menu icon
To exit the menu mode
Press MENU again.  The previous
window is displayed.
2Press  g/G  to select  (File
operation) and then press ENTER.
The File operation menu is displayed.
                                          File operation menu
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							22 GB
3Press f/F  to select “Delete
Image” and press ENTER.
The image list is displayed.
         Trash icon
4Press  g/G /f /F  to move the trash
icon to the image you want to
delete, then press ENTER.
A confirmation dialog box is
displayed.
5Press  g/G  to select “OK” and
press ENTER.
The selected image is deleted.  To
delete other images, repeat steps 4
through 5.
Tip
To exit the File operation menu, press CANCEL.
Notes
• During deleting, do not turn off the printer or
remove the memory card. The printer or the
memory card may be damaged. Or the data
may be lost.
• An image, once deleted, will be lost forever.
Before deleting an image, double-check that it
is the right one.
• When you delete an image with the
associated file indication (
), the associated
motion or e-mail file will be also deleted.
• You cannot delete a protected image with the
protect indication ( 
) or a DPOF preset
indication (
 ) displayed. To delete them,
use your digital camera. For the details, see
the operating instruction of the digital
camera.
Formatting a “Memory Stick”
You can format a “Memory Stick”.  
1Press MENU.
The menu bar is displayed.
2Press  g/G  to select  (File
operation) and then press ENTER.
The File operation menu is displayed.
3Press  f/F  to select “Memory Stick
Format” and press ENTER.
The confirmation dialog box is
displayed.
4Press  g/G  to select “OK” and
press ENTER.
The “Memory Stick” is formatted.
Notes
• When you format a “Memory Stick”, all the
images inside are deleted.
• During formatting, do not turn off the printer or remove the memory card. The printer or
the memory card  may be damaged. Or the
image may be lost.
• You cannot format a memory card other than
the “Memory Stick” or an external device.
Downloaded From ManualsPrinter.com Manuals 
						

							23 GB
Making various printing
Changing the print
settings (Print setup)
The Print setup menu allows you to
change various print settings listed on
pages 24 and 25.
Buttons to be used in this section
g/G /f /F/ ENTER
CANCEL
MENU
1Press MENU.
The menu bar is displayed.
           Menu bar           Print setup menu icon
To exit the menu mode
Press MENU again.  The previous
window is displayed.
2Press  g/G  to select  (Print
setup) and then press ENTER.
The Print setup menu is displayed.
                               Print setup menu
Note
Setting items which cannot be selected and
changed are displayed in gray.
3Press  f/F  to select the desired
setting item, and press ENTER.
The setting window for the selected
item is displayed (next page).
4Press  f/F  to select the desired
setting and press ENTER.
The setting is fixed.
Tip
To exit the Print setup menu, press MENU.
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							24 GB
Item      Settings            Contents
Auto Fine Print 3Photo*/ The function automatically corrects the picture
Vivid quality so that an image may be printed in morevivid, clear and beautiful pictures.  It is especially
effective for a darker image with low contrast.  The
pictures are corrected to reproduce natural skin
colors, vivid tree leaf green, or clear sky blue.
•Photo:  Adjusts an image automatically
so that the image is printed with natural and
beautiful pictures. (Recommended)
• Vivid:  Adjusts an image automatically so that
the image is printed with stronger sharpness
correction and more vivid pictures than the
Photo mode.
Notes
• The image data is not corrected.
• When printing in PC mode, the Auto Fine Print 3 setting
with the printer driver has priority over the setting here.
In the PictBridge mode, this setting holds effective.
Off Prints an image without any corrections.
Exif Print On* Adjusts an image shot by an Exif Print (Exif 2.21)-
compliant digital camera to its optimum picture
quality.
Note
The image data is not corrected.
Off Prints an image without any adjustments.
Borders Yes Prints an image with borders around the image.
Note
Depending on an image, its top and bottom edges or right
and left edges  may be trimmed and printed.
No* Prints an image without blank space around the image.
Note
When printing a standard 4:3 picture shot by a digital
camera, the top and bottom edges of the image are cut and
it is printed as a 3:2 picture.
*:  Factory settings
Downloaded From ManualsPrinter.com Manuals 
						

							25 GB
Making various printing
Item      Settings            Contents
Date Print On Prints the date of shooting with an image when theimage is a file recorded in the DCF (Design rule for
Camera File system) format.  To make a print with
the date of shooting, shoot an image in the DCF file
format.
When the image is saved with the printer, the date of
saving is printed.
Off* Prints an image without the date.
Color SettingAdjusts the colors and sharpness of a print.  Press g/G
to select a color element ( “R” (red), “G“ (green), or
“B” (blue)) or “S” (Sharpness), and then press  f/F  to
set the level. You can set the levels for R, G, B in the
range from +4 to –4 and for S in the range from +7 to
0.
R:Adjusts the red and blue elements.  The higher
you set the level, the more reddish the picture
becomes as if it receives red light.  The lower you
set the level, the darker the picture becomes as if
light blue is added.
G:Adjusts the green and purple elements.  The
higher you set the level, the more greenish the
picture becomes as if it receives green light.  The
lower you set the level, the darker the picture
becomes as if red purple is added.
B:Adjusts the blue and yellow elements.  The higher
you set the level, the more bluish the picture
becomes as if it receives blue light.  The lower you
set the level, the darker the picture becomes as if
yellow is added.
S: The higher you set the level, the more distinct the
outlines become.
(*R: 0/G:0/B:0/S:0)
*:  Factory settings
Downloaded From ManualsPrinter.com Manuals 
						

							26 GB
Changing the display
and printer
preferences (Display/
Printer setup)
The Display/Printer setup menu allows
you to change the display and printer
preferences listed on page 27.
Buttons to be used in this section
g/G /f /F/ ENTER
CANCEL
MENU
1Press MENU.
The menu bar is displayed.
Display/Printer
       Menu bar setup menu icon
To exit the menu mode
Press MENU again.  The previous
window is displayed.
2Press  g/G  to select  (Display/
Printer setup) and then press
ENTER.
The Display/Printer setup menu is
displayed.
                 Display/Printer setup menu
3Press  f/F  to select the desired
setting item, and press ENTER.
The setting window for the selected
item is displayed (next page).
To display the hidden setting items,
scroll the window with  f/F .
Note
Setting items which cannot be selected and
changed are displayed in gray.
4Press  f/F  to select the desired
setting and press ENTER.
The setting is fixed.
Tip
To exit the Display/Printer setup menu, press
MENU.
Downloaded From ManualsPrinter.com Manuals 
						

							27 GB
Making various printing
Item      Settings            Contents
Listing OrderAscending* In the image list window, the images are displayed inthe order of their image numbers, starting from the
smallest number.
Descending In the image list window, the images are displayed inthe order of their image numbers, starting from the
largest number.
Icon On* In the image list window, the images without thumbnail (miniature image used as index) data
will be displayed as an icon.
Off In the image list window, the images withoutthumbnail (miniature image used as index)
data will be displayed as its original image.
Image Data DisplayOn In an image preview window, image information(file type, shooting conditions, etc.) will be displayed.
Off* In an image preview window, no image information
will be displayed.
Date Display OrderSet the displayed order of the date (Year, Month, and Day)  from the
following:
•Y/M/D*       • M/D/Y        •D/M/Y
LCD Backlight Set the brightness level of the LCD backlight from the following:
Bright*/Dark
Demonstration ModeOn* A flash file demonstration to explain the functions of
the printer starts automatically after the printer has
been left unused for about 5 seconds without any
media connected and with this option set to “On”. To
stop the demonstration, press any button.
Off No demonstration flash file will be started.
Language You can select the language of menu or messages.  Depending on the region you purchased the unit, some of the following languages will
appear:  English*/French/Spanish/German/Italian/Russian
*:  Factory settings
Downloaded From ManualsPrinter.com Manuals 
						

							28 GB
Printing from a PictBridge camera or external device
Printing from the
PictBridge digital
camera
You can connect a PictBridge-compliant
digital camera and print an image directly
from your digital camera.  
When printing from a PictBridge
connector, make sure to remove memory
card(s) from the printer in advance.
1Set your digital camera ready for
printing with a PictBridge-
compliant printer.
The settings and operations that are
necessary before connection differ
depending on the digital camera. For
details, see the operating instructions
of the digital camera you use.  (In case
of Sony Cyber-shot digital camera, for
example, select “PictBridge” mode for
the “USB Connect”.)
2Connect the printer to the AC
power source (. Read This
First).
3Press  1 (on/standby) switch to
turn on the printer.
The  1 (on/standby) indicator of the
printer lights in yellow green.
4Connect a PictBridge-compliant
digital camera to the PictBridge
connector of the printer.
When you connect a PictBridge-
compliant digital camera to the
printer, “Connecting” is displayed on
the LCD screen of the printer.
5Operate the digital camera to
print an image.
The printer supports the following
prints: •
Single-image print
• All images print
• Index print
• DPOF print
• Border/Borderless print
• Date print
For notes during printing, please read
“Read This First”.
Camera or other
external device
To USB connector
To PictBridge connector
Notes
• If you replace an ink ribbon while the printer
is connected to a PictBridge-compliant digital
camera, an image may not be printed
properly.  If this occurs, disconnect and then
connect the digital camera.
• When printing from a PictBridge-compliant
digital camera, an image will be printed
according to the settings of the Print setup
menu of the printer.  When you set the date
print or border/borderless options with your
digital camera, the digital camera settings will
have priority.
• For error messages displayed on your digital
camera, refer to the operating instructions of
your digital camera.
• You cannot use a USB hub or a digital camera
containing USB hub.
Downloaded From ManualsPrinter.com Manuals 
						

							29 GB
Printing from a PictBridge camera or external device
Printing from a
Bluetooth-compliant
device
By connecting the Sony DPPA-BT1*
Bluetooth USB adaptor to your printer,
you can print an image of a Bluetooth-
compliant mobile phone, digital camera,
or other device.
*DPPA-BT1 is supplied with the DPP-FP60BT
and is optional with the DPP-FP60.
Notes
• Do not use the DPPA-BT1 outsides the area
you purchased it. Depending on the areas, the
use of the adaptor may infringe the wave
regulations and may be subject to its penalty.
• In some regions, the Sony DPPA-BT1
Bluetooth USB adaptor is not sold.
Compatible profiles for
Bluetooth communication
The DPPA-BT1 adaptor supports the
following profiles:
•BIP (Basic Imaging Profile)
• OPP (Object Push Profile)
For the profiles that your Bluetooth device
supports, please refer to its manual.
What is “Profile”?
Standards that enable the Bluetooth
wireless communication. There are several
profiles depending on the purposes and
product profiles to be used. To make the
Bluetooth communication possible, the
devices to be communicated should
support the same profile.
Compatible image file formats to be
printed
JPEG: DCF 2.0 compatible, Exif
  2.21
compatible, JFIF (4:4:4, 4:2:2, 4:2:0
formats Baseline JPEG)
TIFF: Exif 2.21 compatible BMP: 1, 4, 8, 16, 24, 32 bit Windows
format
Some image file formats are not
compatible.
Maximum number of pixels to be
handled
6 400 (H) x 4 800 (V) dots (Maximum 5 MB
or less)
Printing procedures
When printing from a PictBridge
connector, make sure to remove memory
card(s) from the printer in advance.
1Connect the printer to the AC
power source.
2Press the  1 (on-standby) switch to
turn on the printer.
3Insert the Bluetooth adaptor to
the PictBridge connector of your
printer.
Note
In case any device, other than the
Bluetooth adaptor, such as a memory card,
camera, PC, or other external device or a
USB cable is connected to any of the
memory card slots, the PictBridge
connector, or USB connecter of your
printer,  remove it from the printer and
then connect the Bluetooth adaptor.
4Print from the Bluetooth-
complaint mobile phone, or other
device.
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							30 GB
For printing procedures, refer to the
manual of the Bluetooth device you
use.
To select the printer from a Bluetooth-
compliant device, select “Sony DPP-
FP60 ##”. (“##” stands for the two
figures from the right of the address
displayed in the LCD screen.):
When input of Pass code* is required
Input “0000”. You cannot change the pass
cord with the printer.
*Pass code is often referred to as “pass
key” or “PIN code”.
Notes
•
The communication distance of the product
may vary depending on the obstacles between
the product (a human body, metal object, or
wall) and mobile phone or other device.
• Sensitivity of the Bluetooth communication
may be affected in the following conditions:
-When there is an obstacle between the
product and the mobile phone or other
product such as a human body, metal object,
or a wall.
- Were a wireless LAN is established or a
microwave oven is being used near-by, or
other electromagnetic wave is emitted. •
Since a Bluetooth device and a wireless LAN
(IEEE802.11b/g) device use the same frequency
ranges, wave interferences may occur when the
product is used near a device equipped with a
wireless LAN. This may cause deterioration in
the communication speed and connection
conditions.  If this occurs, take the following
measures:
- Keep a distance of at the nearest 10 m from a
wireless LAN device when you connect the
product to the mobile phone.
– Turn off the wireless LAN device in case you should use the product within 10 m from the
wireless LAN device.
• It is not guaranteed that this product works
with all devices enabled with Bluetooth
wireless technology.
• Do not use the DPPA-BT1 outsides the area you
purchased it. Depending on the areas, the use
of this product may infringe the wave
regulations and may be subject to its penalty.
• Sony cannot assume any responsibilities for any
information leakage that may be caused in
Bluetooth communications.
• Sony cannot accept responsibilities for any
failure to satisfy the protection requirements
resulting from a non-recommended
modification or use of the product.
• For customer support information, please refer
to the operating instructions of your printer.
P Cautions
• Radio waves from a Bluetooth device may
adversely affect the operations of electrical
and medical devices, and could lead to
accidents due to malfunctions.  Make sure to
turn off the product and mobile phone and do
not use this product in the following places:
- Inside the medical facilities, trains,
airplanes, gas stations or other places
that may emit flammable gas.
- near automatic doors or fire alarms or
other automatically controlled devices.
• Keep this product at least 22 cm away from
cardiac pacemakers. Radio waves from this
product may adversely affect the operation of
cardiac pacemakers.
• Do not disassemble or modify this product.
Doing so could result in injury, electric shock,
or fire.
Downloaded From ManualsPrinter.com Manuals