Sony DPP FP55 User Manual

							21 GB
Making basic printing
Tip
When the printer is ready for printing, the
PRINT indicator lights in blue green. (If
not, check to see that the print paper and
print cartridge are properly set.)
4When printing is complete and
the print paper automatically
emerges, remove the printed
paper from the paper tray.
Notes on printing
• Do not remove or connect a memory card or
an external device while the access indicator
is flashing or the access indication is
displayed on the LCD screen.
•
Never move or turn off the printer while it is
printing;  the print cartridge or paper may
become stuck.  In case you turn off the power,
keep the paper tray inserted and then turn on
the printer.  If paper being printed remains in
the printer, remove the paper that emerged
automatically and resume printing from the
step 1.
• The print paper emerges a few times during
printing.  Do not touch nor pull the emerged
paper.  Wait for the print paper to be fully
ejected after printing ends.
• As the print paper emerges from the rear a
few times during printing, make sure to spare
enough space behind the printer during
printing.
2Press   g/G/f /F  repeatedly until
the image that you want to print
appears.
The images are displayed in the image
list.
To print multiple copies
1Press ENTER to display the print
quantity.
2Press  f/F  to increase or decrease
the print quantity.
3Press ENTER to fix the quantity.
To select an image in the image list
Press 
 (zoom out).  One image
preview changes to image list display.
Press  g/G /f /F  to move the cursor
to the image you want to print.
3Press PRINT.
Printing of the selected image starts.
During printing the PRINT indicator
flashes and the printing process is
displayed on the LCD screen.
Downloaded From ManualsPrinter.com Manuals 
						

							22 GB
Printing multiple images
This section explains how to select
multiple images, specify print quantity for
each of them and print them at a time.
1Press 1 (on/standby) switch to
turn on the printer.
The  1 (on/standby) indicator of the
printer lights in yellow green.  An
image contained in the memory card
or external device is displayed on the
LCD screen.
2Press  (zoom out) to display the
image list.
The one image preview changes to the
image list display. The orange frame
shows the cursor.
        Cursor (orange frame)
To display another page
• To display the next page, move the
cursor to the bottom line of the
image list and press  F.
• To display the previous page, move
the cursor  to the top line and press
f.
To display one image preview again
Move the cursor  to the desired image
and press 
 (zoom in).
3Press  g/G /f /F  to move the cursor
to the image you want to print,
and press ENTER.
The print quantity indication becomes
“1”.
          Print quantity indication
Downloaded From ManualsPrinter.com Manuals 
						

							23 GB
Making basic printing
4Press f/F  to set the print
quantity.
• To increase the print quantity one
by one, press  f repeatedly.
• To reduce the print quantity one by
one, press  F briefly repeatedly.
• To reset the print quantity to zero
immediately, press  F for more than
two seconds.
You can set up to  20 copies of print
quantity for an image.
 • To display another image, press g/G .
• To cancel the selection, press
CANCEL.
5Repeat steps 3 and 4 to select
other images and set print
quantity for each of them.
The selected images are displayed
with the cursor .
To cancel the selection
1Press   g/G /f /F  to move the
cursor to the image you want to
cancel in the image list and press
ENTER.
2Press  F repeatedly until the print
quantity becomes “0.”
The image selection is canceled.
6Press PRINT.
The selected images will be printed.
During printing, the PRINT indicator
flashes and the printing process is
displayed on the LCD screen.
To stop printing
Press CANCEL.  When you are
printing multiple copies, the next
printing after the one currently
printing  will be canceled.
7When printing is complete and
the print paper automatically
emerges, remove the printed
paper from the paper tray.
Tip
Even if the remaining volume of the print
cartridge is shorter than the print quantity, you
can proceed with printing.  If the print cartridge
runs out in the middle of printing and a
message appears, follow the displayed
instructions to replace the printing cartridge
(page 12).
Downloaded From ManualsPrinter.com Manuals 
						

							24 GB
Using the LCD screen
You can switch an image preview and the
image list display to view and check a
picture before printing.
•Press 
 (zoom out) repeatedly.
An image is reduced up to the original
scale and then the display changes from
an image preview to the image list.
• Press 
 (zoom in) repeatedly. 
The display changes from the image list
to an image preview.  Then the image is
enlarged up to 5 times the original scale.
To display or select another image
Press  g/G /f /F .  In one image preview,
the displayed image switches.   In the
image list, the cursor (showing the
selected image) moves.
An image preview
* Input indications
The icon of the connected media is displayed:
 : “Memory Stick” or “Memory Stick Duo”
 : SD Card
 : External Device
Print cartridge type
(P: Postcard/C:
cleaning cassette)
Selected input
media (Memory
card or external
device)*
Associated file/
DPOF/Protect
indications** Number of the
selected images/
Total number of
image
Image data
display when
the “Image
data display”
in the Options
menu is set to
“ON”. Image number
(folder- file number)
Saved date (year/
month/day)
Scroll bar
indicating the
position of the
image among
the total
number of
images.
Operation
tips
Downloaded From ManualsPrinter.com Manuals 
						

							25 GB
Making basic printing
**Associated file/DPOF/Protect indications
•Associated file indication: 
The image, in addition to the displayed
image, has an associated file such as a motion
file or a miniature e-mail image file.
• DPOF indication: 
The image is DPOF preset with a digital
camera.
• Protect indication: 
The image is protected with a digital camera.
Image list
Cursor (orange frame)
Operation tips
Scroll bar indicating the
position of the image
among the total
number of images.
Downloaded From ManualsPrinter.com Manuals 
						

							26 GB
Making various printing
Editing an image
Displaying the Edit menu
You can display the Edit menu and edit or
add an effect to an image.
Buttons to be used in the Edit menu
g/G/f/F/ENTER
PRINT
CANCEL
MENU
1Display the image that you want
to edit.
Display the image in the image
preview window or move the Cursor
to the desired image in the image list.
2Press MENU on the printer.
The menu bar is displayed.
          Edit menu icon             Menu bar
To exit the menu mode
Press MENU again.  The previous
window is displayed.
3Press g/G to select  (Edit) and
then press ENTER.
The Edit menu is displayed.
                  Cursor                    Edit menu
Items      Procedures
/Increases or reduces the
size of an image by
pressing the buttons on the
printer.
Moves an image.
Rotates an image.
Adjusts the picture quality
of an image.
Adds an filter to an image.
Reduces the red-eye
phenomenon.
Undoes the editing just
done and resets the image
to the status before editing.
Saves the edited image.
Exits the Edit menu.
Tip
You can press MENU while editing an image
and set part of the Set Up menu items.
Downloaded From ManualsPrinter.com Manuals 
						

							27 GB
Making various printing
3Move the image with g/G/f/F.
The image moves to the selected
direction.
4Press ENTER.
The image is fixed to the position.
Tip
To print the image previewed, press PRINT
(page 30).
Rotating an image 
1Display the Edit menu (page 26).
2Press g/G to select  (Rotate)
and then press ENTER.
The Rotate menu is displayed.
                       Rotate icon         Rotate menu
Enlarging and reducing an
image size
1Display the Edit menu (page 26).
2Press  (zoom in) to enlarge an
image or 
 (zoom out) to reduce
the size of it.
Each time you press the button, the
image becomes larger or smaller:
 :  up to 200%
 :  up to 60%
Note
The picture quality of an enlarged image may be
deteriorated depending on its size.
Moving an image
1Display the Edit menu (page 26).
2Press g/G to select  (Position)
and then press ENTER.
The b/B/v/V appears on the right/
left/above/down the image and you
can move the image.
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							28 GB
3Press f/F to select the direction
to rotate the image and then
press ENTER.
•Rotate 90° Clockwise:  Each time
you press ENTER, the image rotates
90° clockwise.
•Rotate 90° Counterclockwise:
Each time you press ENTER, the
image rotates 90° counterclockwise.
Tip
To print the image previewed, press PRINT
(page 30).
Adjusting an image
1Display the Edit menu (page 26).
2Press g/G to select  (Adjust)
and then press ENTER.
The Adjust menu is displayed.
                               Adjust icon      Adjust menu
3Press f/F to select the desired
adjustment tool and press ENTER.
The adjustment slider appears.
          When “Brightness” is selected.
                            Adjustment slider
4Move the slider to the desired
position to adjust the level.
•Brightness: Press G to brighten the
picture or g to darken it.
•Tint: Press G to make the picture
bluish or g to make it reddish.
•Saturation: Press G to deepen the
colors or g to lighten the colors.
•Sharpness:  Press G to sharpen the
outlines or g to reset them.
5Press ENTER.
The adjustment takes effect.
Tip
To print the image previewed, press PRINT
(page 30).
Adding a special filter to an
image
1Display the Edit menu (page 26).
2Press g/G to select  (Filter) and
then press ENTER.
Downloaded From ManualsPrinter.com Manuals 
						

							29 GB
Making various printing
The Filter menu is displayed.
              Filter menu         Filter icon
3Press f/F to select the desired
filter you want to add to the
image.
•Sepia: Changes the image like an
old photograph with faded colors.
•Monochrome: Changes the image
into a black and white picture.
•Paint: Makes the image look like a
painted picture.
•Fish-eye: Makes the image look like
a photo taken with a fish-eye lens.
•No Filter: No special filter on the
image (default setting).
4Press ENTER.
The filter takes effect.
Tip
To print the image previewed, press PRINT
(page 30).
Reducing the red-eye
phenomenon
You can reduce the red-eye phenomenon
of a subject shot using a flash.
Note
If you perform additional editing, such as
enlarging, reducing the image size,
rotating or moving an image, after the red-
eye reduction adjustment, the red-eye
reduction may not take effect.  Perform the
red-eye reduction after these editorial
operations.
1Display the Edit menu (page 26).
2Press g/G to select  (Red-eye
reduction)  and then press ENTER.
The adjustment frame appears on the
image, which indicates the range for
red-eye reduction adjustment.
                Adjustment frame
3Adjust the position and size of the
adjustment frame.
Make the red-eye reduction
adjustment for the right and left eyes
separately.
To move the adjustment frame
1Press g/G to select  (Position)
and press ENTER.
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							30 GB
Printing and saving an image
Printing an image
1Press PRINT.
The dialog box to specify the print
quantity is displayed.
2Press f/F to increase or decrease
the print quantity.
•To increase the print quantity one
by one, press f repeatedly.
•To reduce the print quantity one by
one, press F briefly repeatedly.
•To reset the print quantity to zero,
press F for more than two seconds. 
3Press PRINT to start printing.
The image previewed is printed.
Saving an image
When you select  (save) in the Edit or
Creative Print menu, the dialog box to
select the destination to save the image is
displayed. You can save the image under a
new image number. 
Tip
The selected image will not be overwritten.
1Select the destination to save an
image.
Press f/F to select the media
(“Memory Stick”,  or “SD Card”) and
press ENTER.
2Move the frame with g/G/f/F.
The frame moves in the selected
direction.
3Press ENTER.
The frame is fixed in the current
position.
To change the size of the
adjustment frame
Press g/G to select 
 (Enlarge) or
 (Reduce) and press ENTER.
Each time you press ENTER, the
frame becomes larger or smaller.
You can also enlarge or reduce the
size by pressing  
 (zoom in)  or 
(zoom out) buttons on the printer.
Tip
Make the size of the adjustment frame two
to seven times as large as the eye size.
4Press g/G to select  and press
ENTER.
The range of red-eye reduction
adjustment is enlarged.
5Press ENTER.
The adjustment takes effect.
The Red-eye reduction menu is
displayed.
To make a red-eye reduction
adjustment for other eyes, repeat
steps 3 to 5.
To reset the adjustment
Press CANCEL in step 5 instead of
ENTER.  The red-eye reduction
adjustment is canceled and the window of
step 2 is displayed.
Tip
To print the image previewed, press PRINT
(page 30).
Downloaded From ManualsPrinter.com Manuals