Home > Smeg > Dishwasher > Smeg Stc75 Instruction Manual

Smeg Stc75 Instruction Manual

Here you can view all the pages of manual Smeg Stc75 Instruction Manual. The Smeg manuals for Dishwasher are available online for free. You can easily download all the documents as PDF.

Page 31

User instructions 
66
GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT 
MAINTENANCE: 
xThe filters should be cleaned under running water using a stiff 
brush. 
xWhen removing the filter, take care that there are no food residues 
on it. If any residues fall into the washing pit they might block 
hydraulic components, or foul the spray arm nozzles. 
xIt is essential to thoroughly clean the filters according to the above 
instructions: the dishwasher cannot function if the filters are clogged. 
xCarefully...

Page 32

User instructions 
67
If the dishes do not come out clean, check that: 
xthe correct amount of detergent has been added; 
xthere is regenerating salt inside the special container; 
xthe dishes are being loaded correctly; 
xthe selected program is suitable for the dish types and their degree 
of soiling; 
xall the filters are clean and positioned correctly; 
xthe spray arm nozzles are not obstructed; 
xthere is no object obstructing the rotation of the spray arms;
xthe detergent dispenser hatch has not...

Page 33

User instructions 
68
6. Troubleshooting 
The dishwasher is capable of signalling a number of faults through the 
simultaneous illumination of several indicator lights, with the following 
meanings: 
FAULT DESCRIPTION 
E3
Water heating malfunction The water is not heated or the heating parameters are not correct. Repeat the washing program; if the problem persists, contact the after-sales service. 
E4
Water temperature monitoring malfunction Interrupt the program and switch off the dishwasher. Switch the...

Page 34

User instructions 
69
If an alarm occurs the appliance interrupts the program in progress and 
signals a fault. 
xAlarmsE3, E4 and E9 interrupt the current program immediately. 
xTheE5,E6 alarms interrupts the running program once the cause is 
resolved, it will bring bach the execution of the program.
xThe alarm E7 is visualized at the end of the cycle that comes, however, 
brought to the end since the operation of the dishwasher is not harmed.
To “reset” an alarm is necessary: 
xOpen and close the...

Page 35


				            

Page 36

898898
896896
894894
0 5 10
10
1515
2020
2525
3030
3535
4040
4545
5050
5555
MAXMAX
MINMIN
SXSXDXDX
SXSXDXDX
5555
5050
898898
896896
894894
0 5 10
10
1515
2020
2525
3030
3535
4040
4545
 
Start reading Smeg Stc75 Instruction Manual

Related Manuals for Smeg Stc75 Instruction Manual

All Smeg manuals