Smeg Stc75 Instruction Manual

User instructions 
46
83/1 OPTION BUTTON   
Press this button to activate the option for use of 3/1 products.
93/1 OPTION LIGHT  
Illuminates to indicate that the function is activated. 
10PROGRAM DELAY BUTTON 
Press this button to delay the start of the program by up to 9 hours.
11INFORMATION DISPLAY
SETTING THE WASHING PROGRAM AND SWITCHING ON 
To select the most suitable program for the dishes to be washed refer to 
the table below, which indicates the most appropriate program according 
to dish type...

User instructions 
47 After using the table to identify the most appropriate washing program: 
x press the ON/OFFbutton(1) and wait for the PROGRAM 
INDICATOR LIGHT (2) to illuminate; 
x  keep pressing the PROGRAM SELECTION button (3) until the 
indicator light corresponding to the desired program illuminates; 
x  close the door; after about 2 the program will start. While it is in 
progress, the relative LIGHT will flash (indicating that the program is 
being executed). 
PROGRAMME DURATION   CONSUMPTION...

User instructions 
48
PROGRAMME DURATIONCONSUMPTION (3) 
NRSYMBOL NAME 
TYPE OF DISHESAND DIRT 
PROGRAM DESCRIPTION MINUTES(2) WATER (LITRES) (1) 
POWER (KWh) (2) 
DETERGENTGRAMS
6DISH WARMER 
Clean mixed dishes requiring rinsing and warming before taking to table  
Cold rinse Rinse at 68°C           Dry 2030,40-
7CRYSTAL Crystal, porcelain and mixed dishes, light dirt 
Wash at 45°C Cold rinse Rinse at 68°C Dry 
5570,6015
8BIO (*) EN 50242 Mixed dishes, normal dirt 
Cold prewash Extended wash at 53°CCold...

User instructions
49 After using the table to identify the most appropriate washing program:
xpress theON/OFFbutton(1)and wait for thePROGRAM
INDICATOR LIGHT (2)to illuminate;
xkeep pressing thePROGRAM SELECTIONbutton(3)until the
indicator light corresponding to the desired program illuminates;
xclose the door; after about2the program will start. While it is in
progress, the relativeLIGHTwill flash (indicating that the program is
being executed).
PROGRAMMEDURATIONCONSUMPTION (3)
NRSYMBOLNAME
TYPE OF...

User instructions
50
PROGRAMMEDURATIONCONSUMPTION (3)
NRSYMBOL NAME
TYPE OF
DISHES
AND DIRTPROGRAM
DESCRIPTIONMINUTES
(2)WATER
(L I T R E S )
(1)POWER
(KWh)
(2)DETERGENT
GRAMS
6DISH
WARMER
Clean mixed
dishes requiring
rinsing and
warming before
taking to table
Rinse at 68°C          
Dry2030,40-
7CRYSTALCrystal, porcelain
and mixed dishes,
light dirtWash at 45°C
Cold rinse
Rinse at 68°C
Dry
5570,6015
8BIO (*)
EN 50242Mixed dishes,
normal dirt
Cold prewash
Extended wash at
52°C
Cold rinse
Rinse at 67°C...

User instructions 
51
The washing cycle will not take place if the dishwasher door is left open 
or not properly closed. 
 TABLE FOR CERTIFICATION BODIES 
Reference standard EN 50242 
Reference program BIO
Load 7 place-settings 
Type of detergent B
Amount of detergent 21 g 
Rinse aid setting5/6
3.2 Washing programs 
Before starting a washing program make sure that: 
xThe water supply tap is open.
xThe correct amount of detergent has been added to the 
dispenser.
xThe baskets have been correctly loaded....

User instructions 
52CHANGING THE PROGRAM 
To change the program in progress, simply open the door and select a 
new program. When the door is closed the dishwasher will automatically 
select the new program.
EXTRA PROGRAMS 
Button (6) gives access to five extra programs in addition to the ones 
which can be selected directly using the program selector button. 
This button must be pressed (the light comes on) after selection of the 
main program (1, 2, 3, 4 or 5). 
This function is retained in the...

User instructions 
53
DELAYING THE PROGRAM (available in all programs except the 
soak program) 
The PROGRAM DELAY button (10)can be pressed to delay the start of 
the program by up to 9 hours. This means that the dishwasher can be 
operated at the time of day of your choice. Press the button several 
times in succession and the display will show the delay with which the 
appliance will start, beginning from 9 hours. The dishwasher will perform 
a dish pre-washing, and when finish, the “delay program”...

User instructions 
54ADJUSTING THE WATER SOFTENING SYSTEM 
N.B.: for the setting below to be possible, a washing program other than 
the soak program must be set.
Press the PROGRAM DELAY button (10) and keep it pressed until the 
preset value appears followed by a full stop (normally 3.).
Release the button then press it again in succession to display the value 
required, referring to the table. 
The 6 setting levels available will appear in this order: 
3.,4.,5.,0.,1.,2..
When the value required appears...

User instructions 
55
If the door has to be opened while washing is in progress, the program 
will be interrupted. The relative light will keep flashing and a beeper will 
signal that the cycle has not been completed. When the door is closed 
the program will continue from where it was interrupted. This operation 
should only be carried out if strictly necessary, because it might 
cause problems in execution of the program. 
END OF CYCLE 
At the end of the program the beeper sounds briefly and the lights...