Home > Smeg > Dishwasher > Smeg Stc75 Instruction Manual

Smeg Stc75 Instruction Manual

Here you can view all the pages of manual Smeg Stc75 Instruction Manual. The Smeg manuals for Dishwasher are available online for free. You can easily download all the documents as PDF.

Page 1

 INSTRUCTION MANUAL 
 
 
      
  
 
 
 
 
 
 
 
DISHWASHER 
 
 
 
 
 

Page 2

Contents
37 1. Safety and operating instructions __________________________ 38
2. Installation and hook-up__________________________________41
3. Description of the controls ________________________________ 45
4. Operating instructions ___________________________________ 56
5. Cleaning and maintenance _______________________________ 64
6. Troubleshooting ________________________________________ 68
Thank you for choosing this product. 
We advise you to carefully read all the instructions contained in this...

Page 3

Safety instructions 
38
1.  Safety and operating instructions 
THIS MANUAL FORMS AN INTEGRAL PART OF THE APPLIANCE: IT MUST 
ALWAYS BE KEPT INTACT TOGETHER WITH THE DISHWASHER. BEFORE 
USING THE APPLIANCE, CAREFULLY READ ALL THE INSTRUCTIONS 
CONTAINED IN THIS MANUAL. INSTALLATION MUST BE PERFORMED BY A 
QUALIFIED TECHNICIAN, IN COMPLIANCE WITH THE REGULATIONS IN 
FORCE. THIS APPLIANCE IS INTENDED FOR DOMESTIC USE, AND 
COMPLIES WITH THE EEC DIRECTIVES 73/23, 89/336 (INCLUDING 92/31
AND 93/68) CURRENTLY...

Page 4

Safety instructions 
39
THIS APPLIANCE IS MARKED ACCORDING TO THE EUROPEAN DIRECTIVE 
2002/96/EC ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT 
(WEEE). BY ENSURING THIS PRODUCT IS DISPOSED OF CORRECTLY, 
YOU WILL HELP PREVENT POTENTIAL NEGATIVE CONSEQUENCES FOR 
THE ENVIRONMENT AND HUMAN HEALTH, WHICH COULD OTHERWISE BE 
CAUSED BY INAPPROPRIATE WASTE HANDLING OF THIS PRODUCT. 
THE SYMBOL 
 ON THE PRODUCT, OR ON THE DOCUMENTS 
ACCOMPANYING THE PRODUCT, INDICATES THAT THIS APPLIANCE MAY 
NOT BE TREATED AS...

Page 5

Safety instructions 
40
DO NOT DRINK THE WATER RESIDUES WHICH MAY BE PRESENT INSIDE 
THE DISHES OR DISHWASHER AT THE END OF THE WASHING PROGRAM 
AND BEFORE THE DRYING CYCLE. 
KNIVES AND OTHER SHARP-POINTED KITCHEN UTENSILS MUST BE 
PLACED IN THE CUTLERY BASKET WITH THEIR TIPS FACING DOWNWARD. 
AQUASTOP MODELS 
THE AQUASTOP DEVICE PREVENTS FLOODING IN THE EVENT OF A 
WATER LEAK. WHEN THE AQUASTOP DEVICE IS TRIPPED, CALL IN A 
QUALIFIED TECHNICIAN TO  IDENTIFY AND REPAIR THE FAULT. 
IN MODELS EQUIPPED WITH...

Page 6

Installation instructions 
41
2.  Installation and hook-up 
Remove the polystyrene basket retainers.  Position the appliance in the desired place of installation. The back or sides of the dishwasher may be placed up against walls or other furniture units. If the dishwasher is installed near a heat source, fit the special insulating panel to prevent overheating and malfunction of the appliance. To ensure stability, install integrated or built-under dishwashers only under continuous worktops, and screw...

Page 7

Installation instructions 
42
2.1 Water supply connection 
Preventing the risk of clogging or damage: if the water pipe is new or has not been used for a long time, before connecting to the water supply check that the water is clear and free of impurities, to prevent damage to the appliance. The dishwasher must always be connected to the water system with new hoses; old or used hoses must never be reused.
CONNECTING TO THE WATER SUPPLY Connect the intake hose to a cold water supply with ¾” gas thread,...

Page 8

Installation instructions 
43
IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD: 
IT IS NECESSARY TO INSTALL IN THE FIXED WIRING AN ALL-POLE DISCONNECTION DEVICE HAVING A GAP BETWEEN CONTACTS OF AT LEAST3.5MM. AFTER INSTALLATION THE DISCONNECTION DEVICE HAS TO BE EASY TO REACH. 
THE CONNECTION TO THE MAINS MUST BE CARRIED OUT BY A QUALIFIED TECHNICIAN IN ACCORDANCE TO THE SCHEME SHOWN BELOW AND THE REGULATIONS IN FORCE.
L  = brown 
N  = blue 
 = yellow-green 
In the event of damage to the supply...

Page 9

Installation instructions 
44
FOR UK ONLY: 
THIS APPLIANCE MUST BE EARTHED. 
Fuse replacement 
If the mains lead of this appliance is fitted 
with a BS 1363A 13ampfused plug, to 
change a fuse in this type of plug use an 
A.S.T.A. approved fuse to BS 1362type 
and proceed as follows: 
1.Remove the fuse cover A and fuse B.
2.Fit replacement 13A fuse into fuse 
cover.
3.Refit both into plug. 
The fuse cover must be refitted when changing a fuse and if the fuse 
cover is lost the plug must not be used until...

Page 10

User instructions 
45
3.  Description of the controls 
3.1 Upper panel 
All the dishwasher controls are grouped on the upper panel. Switch-on, 
programming, switch-off etc. procedures are only possible when the door 
is open. 
1ON/OFF BUTTON
Pressing this button energises the appliance. 
2
SELECTED PROGRAM INDICATOR LIGHTS 
Illumination of this light denotes the program selected and the occurrence of a 
fault (troubleshooting). 
3PROGRAM SELECTION BUTTON
By pressing this button in sequence it is possible...
Start reading Smeg Stc75 Instruction Manual

Related Manuals for Smeg Stc75 Instruction Manual

All Smeg manuals