Sim2 Multimedia Projector Ht5000 User Manual

11
ht5000

5   SwiTChiNg ThE PROJECTOR ON AND Off
wARNiNg: Connect the projector to a power supply with a 
nominal voltage within the following values: 100-240 V AC, 
50/60 hz. it must be earthed (f ig. 8).
I0
Power Switch:Position I: OnPosition 0: Off
FusedPower Socket
Power Plug
 
In position i the projector will initialise itself  (red and green leds 
on) and then goes into standby mode (red led on) (Fig. 9).
I0
SwiTCh ON fROM STANDBY 
With the remote control press one of the keys:
- 0 to select the...

1
ht5000

Initialisation 
StatusLed blueLed red
Standby 
On
Cooling 
: Of: On: Flashing
Error (*)
Logo Backlit 
Blue Color
Red Color
Of / Blue Color (*)
Red Color
Red Color 

6  CONNECTiONS
To obtain the best performance from your projector, we recom-
mend the use of good quality “ video cables”.
Poor quality cables will cause inferior picture performance.
For  optimum  connectivity  we  recommend  you  follow  these 
simple steps:
with  exception  of  coaxial  RCA/Phono  type  connectors, 
always...

1
ht5000

Connection panel 
3
124
5
Television receiver
DVD Player
Videorecorder
Videocamera
Game Console
Television receiver
HDTV Receiver
DVD Player
Videorecorder
Game Console
Television receiver
HDTV Receiver
DVD Player
Videorecorder
Game Console
HDTV Player
Blue-Ray PlayerComputer
6
14
Professional & broadcasting equipements
7
HDTV Receiver
DVD Player
Computer
HDTV Receiver
DVD Player
Game Console
HDTV Player
Blue-Ray Player
8910111213  

14
ht5000

of the pictures reproduced by the HT5000 in the two cases:  the 
deinterlacing performed by the HT5000 is often more effective 
than that performed by the source itself.
gRAPhiCS RgB / YP
RPB
This input should be connected to an RGB-type video or graphic 
signal using a cable with a DB15HD type connector.
The signal source device (typically a personal computer or game 
console) must be able to provide separate H/V synchronisation or 
composite H+V synchronisation.
DVi-D
This input allows you...

15
ht5000

RS232 iNTERfACE CONNECTOR 
I0
LAN RJ45
CONTROL USB
CONTROL RS232
The projector can be controlled from a PC: simply hookup the 
interface connector to a PC ’s RS serial cable or to a PC's 
USB  1.1  cable  or  with  ethernet  lan  (RJ45)  in  according  with 
standard ethernet 10/100 Mbit e TCP/IP. (Fig.1)
The Ethernet RJ45 and USB control require an additional software 
provided by SIM Multimedia.
The  projector  is  equipped  with  an  infrared  sensor  on  its...

16
ht5000

MAiN MENU
To  access  the  main  menu  of  the  On  Screen  Display  press 
the MENU key on the keypad or the MENU+ or MENU- key on the 
remote control. 
The  main  menu  is  divided  into  four  windows, PICTURE,  IMAGE, 
SETUP  and  MENU,  in  which  the  various  adjustments  are  grouped 
according to the frequency of use. Use the ▲ and ▼ keys to 
select  the  line  corresponding  to  the  adjustment  you  wish  to 
make (Fig. 15). 
The  various  menus  only  offer  the  relevant...

17
ht5000

These submenus are accessed by pressing the < key, while exit 
and return to the upper level occurs by pressing MENU+/-. 
Press  ESC  on  the  remote  control  or  keypad  to  interrupt  the 
menu  display  or  wait  for  it  to  disappear automatically  after 
the number of seconds set on the SET-UP page.
PiCTURE
This menu includes all image adjustment settings. Adjustments 
that are not available for a given input do not appear on the 
menu. For a full listing of the menu, refer to...

18
ht5000

Selecting  the  NO  option  causes  the  de-interlacer  to  apply  a 
Motion compensated algorithm optimized for video camera 
signals.
NOiSE REDUCTiON 
This  adjustment  serves  to  select  the  noise  reduction  filter  va-
lue.
This adjustement is allowed for interlaced video signals, while 
for  the  progressive  video  signals  only  if SHARPNESS  MODE  in  set 
on VIDEO.
iMA gE
This  menu  features  adjustments  relating  to  picture  Position, 
Aspect ratio, Magnification etc.
ASPECT...

19
ht5000

cameras, and for viewing films or photos on your PC. The Enhanced set is suitable for watching movies. The Graphics set is suited to displaying graphics (PC, CAD, PC presentations, etc.). User enables you to define your own curve. You can thus 
 ST1  For general use
 
 EN1  Suited  to  displaying  images  from  videoca
-meras,  digital  cameras  or  TV  studios  in  high ambient light.
 
 EN  Suited  to  displaying  images  from  videoca
-meras,  digital  cameras  or  TV  studios  in...

0
ht5000

select the coefficient which determines the curve. 
Values from 1.5 to .  allow you to emphasise the detail of dark 
images,  but  reduce  overall  contrast.  Values  higher  than  . 
increase overall contrast, but reduce the detail of dark areas. 
Value . typically yields pleasant, contrasty images.  
OVERSCAN
Eliminates irregularities around the outer borders of the image. 
Some  less  accurate  sources  may  produce  an  image  with 
uneven borders; thanks...