Sim2 Multimedia Projector Ht5000 User Manual

1
ht5000

SETUP
The  setup  menu  contains  less  frequently  used  adjustments 
that  may  be  required  during  installation  (e.g.  The  display  of 
Test Patterns).
ORiENTATiON
Reverse  the  image  vertically  and  horizontally  to  best  fit  the 
installation:  i.e.  desktop  front,  ceiling  front,  desktop  rear  and 
ceiling rear (Fig.19).
KEYSTONE
This adjustment compensate the image distortion caused by 
tilting the projector. We recommend installing the projector on 
a surface which is...


ht5000

MENUS
LANgUAgE
Selects On Screen Display menu language.
iNPUTS LiST
In  order  to  make  the  HT5000  system  increasingly  flexible,  the 
functions described below make it possible to modify the inputs 
selection  menu  and  adapt  it  so  that  it  matches  the  require-
ments of the user more closely. The main page displays all the 
inputs physically present on the projector.
You  can  delete  any  inputs  which  are  not  in  use.  To  do  this, 
select  the  input  in  the  pull...


ht5000

f1-f2 keys
The remote control is equipped with two keys (F1 and F) which 
are associated with various different functions.
The screen has six options, one for each line, and two columns 
indicating the keys F1-F. You can select F1 and F  with the keys 
◀ and ▶ on the remote control; select the function to assign 
to F1 or F with the keys 
▼ and ▲.
The function performed by the key is confirmed by the appea-
rance of a dot on the corresponding column-row...

4
ht5000

Some of these parameters may not be available for certain 
inputs or certain input signals.
The menu page for the Memories management functions is 
activated by pressing the key  on the remote control.
The  operations  that  can  be  performed  on  each  memor y 
selected are described here below.
Save memory
To  save  the  image  parameter  current  values  in  memor y  1, 
move the cursor to line ‘1’ with the ▼ and ▲ ‚ keys and open 
the pull-down menu by pressing the ◀ key (Fig....

5
ht5000

iNfO
Displays  the  current  status  of  the  projector  and  information 
concerning the projected video/graphic signal. 
This function is displayed on pressing the  key on the remote 
control (or, in the absence of the On Screen Display, the ▶ key 
on the keypad).
QUiCK MENUS
The quick menus provide access to the main adjustments that 
affect image quality without calling the main menu. BRIGHTNESS,  
CONTRAST , COLOUR, TINT, SHARPNESS 
and FILTER adjustments appear at 
the bottom of the...

6
ht5000

10  TROUBLEShOOTiNg gUiDE
No power (LEDs always Off)
•  
Check that the unit power switch are set to I.
•  
Check that the power cable is correctly connected to the 
unit power sockets.
•  
Check  the  condition  of  the  fuse  located  on  the  power 
socket on the rear of the projector.
•  
Replace the fuse located on the projector’s power socket with an 
identical type (T 5A H).
•  
If the fuse blows repeatedly, seek technical assistance from 
your nearest Dealer.
Lamp fails to switch...

7
ht5000

You  can  purchase  the  following  optional  accessories  at  your 
Dealer:
 - Ceiling mount kit
  - Lens
A  range  of  lenses  are  available  from  our  dealers  to  satisfy 
var ying  installation  and  projection  distance  needs.  See  the 
Additional Information chapter for greater details on projection 
distance and enlargement ratios.
Always contact our service centre to have the lens replaced. 
12   OPTiONAL ACCESSORiES
Use only original or  SiM2 Multimedia approved...

8
ht5000

ELECTRONiCS
Input signals: 
 • COMPOSITE VIDEO (CVBS)
           gold plated RCA connectors 
           1,0 V
pp / 75 Ω, negative synchronisation
  • 1 S-VIDEO (Y/C)
                4-pole mini-DIN connector
           Y: 1.0 V
pp / 75 Ω, negative synchronisation 
      C: 0.86 Vpp / 75 Ω, [ nominal NTSC burst level] 
      0. Vpp / 75 Ω [nominal PAL, SECAM burst level]
  •  COMPONENTS (Y/Pr/Pb/) - RGBS  
      1 set of 4 RCA connectors
      1 set of 5 BNC connectors...

9
ht5000

ON SCREEN MENU LAYOUT
     IMAGE
 PICTURE
Brightness 
Contrast 
Color 
Tint 
Sharpness 
Filter 
Cinema Mode  Best Color
Video • S-Video[NTSC]        
Orientation 
Keystone   
Lens 
Power ON
 
Test patterns 
Initial settings 
Lamp Power 
Floor Floor-rear Ceiling Ceiling-rear  
Normal 
Anamorphic 
Letterbox 
Panoramic Subtitles
Pixel to Pixel
User 1
User 2
User 3
Horizontal
VerticalScreen control
Brightness
Contrast
Sharpness
Sharpness Mode 
Brightness
Contrast
ColorSharpness
Sharpness Mode...

0
ht5000

SETUPOrientationKeystone
Projection Lens
 
Lamp Power
Power OnTest patternsInitial settings
FloorFloor-rearCeilingCeiling-rear
HorizontalVertical
AutoStand-by
LanguageSource list F1/F2 keysSource infoOSD backgroundOSD PositionOSD Timeout
ZoomFocusMagnificationBlankColor temperatureGamma correction
Yes    No
ItalianoEnglish
Français
EspañolDeusch
PortuguêsPyccK
F1F2
Active  Yes   No
Name
Cancel
Confirm
Edit source name ()?@1 ABC2 DEF3GHI4 JKL5MNO6PQRS7-
+
 TUV8
 0
WXYZ9
_ _ _ _ _ _ _ _ _ _...