Sharp Xv Z10000u Projector User Manual

Easy to Use Functions
-59
VIDEO
• Select “DOT BY DOT” during 720P input when viewing 720P output from a computer.
• 720P switches between “STRETCH” and “DOT BY DOT”. “STRETCH” is fixed when 1080I signal is entered.
• “Digi. Shift” and “Subtitle” only move when in the “SMART STRETCH” and “CINEMA ZOOM” modes.
960 
 720 1280 
 720 480I
480P
576I
576P
NTSC
PAL
SECAM
960 
 720 1280 
 720 480P
–– 720P
––1280 
 720
1280 
 720 1280 
 720 SIDE BAR STRETCHCINEMA
ZOOM SMART
STRETCH
1280 
 720
–
–1280 
 720
1280 
...

-60
COMPUTER
• “NORMAL” is fixed when XGA (1024 × 768) signals are entered.
960 
 720 800 
 600  SVGA (800 
 600)NORMAL DOT BY DOT
For 4:3
 aspect ratio
For without 
4:3 aspect ratio960 
 720 1024 
 720 XGA (1024 
 768)
960 
 720 1280 
 720 SXGA (1280 
 960)
900 
 720 1280 
 720 SXGA (1280 
 1024)
VGA
SVGA
XGA
SXGA
Input Signal
NORMALOutput screen image
DOT BY DOT
4:3 aspect ratio
(640 
 480)
4:3 aspect ratio
(800 
 600)
4:3 aspect ratio 
(1024 
 768)
5:4 aspect ratio 
(1280 
 1024)
Selecting the Picture...

Easy to Use Functions
-61
HIGH CONTRAST/
HIGH BRIGHTNESS MODE
button
Operating the Theater
Mode Function
Press the HIGH CONTRAST/HIGH
BRIGHTNESS MODE button to se-
lect the “HIGH CONTRAST MODE”
or “HIGH BRIGHTNESS MODE”.
Note
•The projector is set to the “HIGH CON-
TRAST MODE” when shipped from the
factory.
Switchable High Contrast/High Brightness Mode
This function controls the quantity of the projected light and the contrast of the image. It can
be operated using the HIGH CONTRAST/HIGH BRIGHTNESS MODE...

Digital Shift Function
For easier viewing, this function shifts the entire image projected on the screen up or down
when projecting 16:9 images from DVD players and DTV* decoders.
* DTV is the umbrella term used to describe the new digital television system in the United
States.
Adjusting the Digital
Shift
Select “Digi. Shift” in the “Options”
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
•The Digital Shift Function works with the
SMART STRETCH and CINEMA ZOOM
screen....

Easy to Use Functions
-63
Video Digital Noise Reduction (DNR) System
Reducing Image Noise
Select “DNR” in the “Options” menu on
the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
•Set a level so as to view a clearer picture.
Make sure to set DNR to “OFF” in the fol-
lowing cases:
•When the image is blurry.
•When the contours and colors of moving
images drag.
•When TV broadcasts with weak signals
are projected.
Note
•This function is available with INPUT 1, 2
(480
I, 480P, 580I and...

This function allows you to turn on or off the on-screen messages. When setting “ Level A”
or “
 Level B” in “OSD Display”, the input mode display (e.g. INPUT 1) will not appear, even
if the INPUT button is pressed.
Setting On-screen Display
Selected Item
 Normal
 Level A
 Level B
Description
All On-screen Displays are displayed.
Input and Auto Sync are not displayed.
All On-screen Displays are not displayed.
(except for Menu, On-screen Displays displayed when the KEYSTONE button is pressed,
and warning...

Easy to Use Functions
-65
For INPUT 5
Set when RGB signals are
received from video equip-
ment.
Set when analog component
signals are received from
video equipment.
 RGB
 Component
Set when digital PC RGB
signals are received from
the computer.
Set when digital PC com-
ponent signals are re-
ceived from the com-
puter.
Set when digital video
RGB signals are re-
ceived from video equip-
ment.
Set when digital video
component signals are
received from video
equipment.
Set when analog RGB
signals are...

Setting the Video System
Setting the Video
System
Select “Video System” in the “Options”
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
•The video signal can only be set in IN-
PUT 3 or INPUT 4 mode.
•In “Auto”, images are displayed in PAL
even if PAL-N or PAL-M input signals are
received.
The video input system mode is preset to “Auto”; however, a clear picture from the con-
nected audio-visual equipment may not be received, depending on the video signal differ-
ence....

Easy to Use Functions
-67
Selecting the Economy Mode
These functions allow you to reduce the power consumption of the projector.
Setting the Power Save
Select “Power Save” in “Economy
Mode” under the “Options” menu on the
menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
•Although noise is reduced when “Pow er
Save” is set to “ON”, brightness decreases
by 20%.
•“Power Save” mode is factory preset to
“OFF”.
•“Power Save” is switched on and off by
pressing 
.
RS-232C Off Function
This...

Selecting the Economy Mode
Selecting the Transmission Speed (RS-232C)
This menu allows you to adjust the transmission speed of the RS-232C connection by select-
ing the baud rate.
-68
Selecting the Transmis-
sion Speed (RS-232C)
Select “RS-232C” in the “Options” menu
on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
•Make sure that both the projector and
computer are set for the same baud rate.
Refer to the computer’s operation manual
for instructions for setting the...