Sharp Xv Z10000u Projector User Manual

Introduction
-9
PDF operation manuals in several languages for the “SharpVision Manager” theater projec-
tor software provided are included in the CD-ROM.  To utilize these manuals, you need Adobe
Acrobat Reader installed on your PC (Windows or Macintosh). If you have not installed Acro-
bat Reader yet, you can install it from the CD-ROM.
To install Acrobat Reader from the CD-ROM
For Windows:
1Insert the CD-ROM in the CD-ROM drive.
2Double click the “My Computer” icon.
3Double click the “CD-ROM” drive....

-10
32
32
37
27
26
26
32
58
32
32
74
74
25
Adjustment buttons(", ', \, |)For selecting menu items.
ENTER buttonFor setting items selected 
or adjusted on the menu.
UNDO buttonFor undoing an operation or 
returning to the default 
settings.
Lens shift dial
Zoom knob
Focus ringMENU button
For displaying adjustment 
and setting screens.
RESIZE button
For switching the screen 
size (SIDE BAR, SMART 
STRETCH, etc.).
INPUT buttonFor switching input mode 
1, 2, 3, 4 or 5.
Power (ON/OFF) buttons
For...

Introduction
-11
21
1
3
3PUSH!
16
Remote control 
sensor13
18
Kensington Security 
Standard connector INPUT 2 terminals
Terminals for 
component and RGB 
signals
.
19INPUT 5 terminalTerminal for DVI 
digital, computer 
RGB and component 
signals.
18
INPUT 1 terminalsTerminals for 
component and 
RGB signals
.
17INPUT 3 terminalTerminal for 
connecting video 
equipment with an 
S-video terminal.
24WIRED REMOTE 
control input 
terminal
17INPUT 4 terminalFor connecting 
video equipment.
73Intake vent
Rubber...

-12
Remote Control (Front View)
Part Names
36KEYSTONE buttonFor adjusting Keystone Correction 
or Vertical Size setting.
24WIRED R/C JACKFor controlling the projector by 
connecting the remote control to the 
projector.
32Power (ON/OFF) buttonsFor turning the power on or off.
32MENU buttonFor displaying adjustment and 
setting screens.
32Adjustment buttons(', ", \, |)For selecting menu items.
32ENTER buttonFor setting items selected or 
adjusted on the menu.
37UNDO buttonFor undoing an operation...

Introduction
-13
45˚
23(7 m)
30˚30˚
45˚
30˚
Using the Remote Control

The remote control can be used to control the projector
within the ranges shown in the illustration.
Note
•The signal from the remote control can be reflected off a screen
for easy operation. However, the effective distance of the signal
may differ due to the screen material.
When using the remote control:
•Be sure not to drop, expose to moisture or high temperature.
•The remote control may malfunction under a fluorescent lamp.
Under...

-14
Accessories
Remote control
RRMCGA128WJSATw o  “AA” size batteries
Power cord
CACCDA010DE01
3 RCA to 15-pin D-sub cable (910 (3.0m)) AN-C3CP
DVI to 15-pin D-sub adaptor (7.9 (20cm)) AN-A1DV
DVI cable (910 (3.0m)) AN-C3DV
RS-232C cable (3210 (10.0m)) AN-C10RS (null modem, cross type)
Note•Some of the cables may not be available depending on the region. Please check with your nearest
Authorized SharpVision Service Center or Dealer.Operation manual (this manual)
TINS-A440WJZZA
SharpVision Manager...

Connections and Setup
Connections and Setup 

-16
Connecting the Projector to Other Devices
Before Connecting
Note
•Before connecting, be sure to turn off both the projector and the devices to be connected. After making all
connections, turn on the projector and then the other devices.
When connecting a computer, be sure that it is the last device to be turned on after all the connections are
made.
•Be sure to read the operation manuals of the devices to be connected before making connections.
This projector can be connected to:
Video equipment:

A...

Connections and Setup
-17
Connecting to Video Equipment
S-video cable (commercially available)
Connecting to Video
Equipment Using an
S-video or a Composite
Video Cable
Using an S-video or a composite video cable,
a VCR, laser disc player or other video equip-
ment can be connected to INPUT 3 and INPUT
4 input terminals.
Connect the projector to the video
equipment using an S-video cable
or a composite video cable (both
commercially available).
Note
•The INPUT 3 (S-VIDEO) terminal uses a
video signal...

Component cable
(commercially available)
DVD player or
DTV* decoderConnecting to
Component Video Equipment
Using a Component Cable
(INPUT 1 or 2)
Use a component cable when connecting the
component video equipment such as DVD play-
ers and DTV* decoders to INPUT 1 or 2 termi-
nal.
*DTV is the umbrella term used to describe the
new digital television system in the United States.
Connect the projector to the com-
ponent video equipment using the
component cable.
Note
•When connecting the projector to the...