Sharp Xv Z10000e Projector User Manual

Basic Operation
-49
Adjusting the Gamma
Adjust the gamma curve to suit your prefer-
ences. These gamma values can be adjusted
only when the gamma position is set to “Cus-
tom 1” or “Custom 2”.
Select the gamma item in the “Gamma”
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Selected Item Description\ button| || |
| button
R-Gamma(Red Gamma)
G-Gamma
(Green Gamma)
B-Gamma(Blue Gamma)
R-Gain
(Red Gain)
G-Gain
(Green Gain)
B-Gain
(Blue Gain)
R-Offset
(Red Offset)
G-Offset...

Color Management System (C. M. S.)
This function allows you to individually adjust the display characteristics of six colors (R:
Red, Y: Yellow, G: Green, C: Cyan, B: Blue, M: Magenta) .
RedCyan
YellowBlue
GreenMagenta
Selecting the Color
Reproduction Mode
Select “Color Selected” in the “C.M.S.”
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
•If “Standard” is selected for “Color Se-
lected”, other items (e.g., Target) cannot
be adjusted.
Selecting the Target
Color...

Basic Operation
-51
Setting the Brightness
of the Target Color
Select “Lightness” in the “C.M.S.”
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Setting the Chromatic
Value of the Target
Color
Select “Chroma” in the “C.M.S.” menu
on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Setting the Hue of the
Target Color
Select “Hue” in the “C.M.S.” menu on
the menu screen.
➝For operating the menu screen, see
pages 40 to 43. 

Color Management System (C.M.S.)
Resetting User-Defined
Color Settings
Select “Reset (This Color)” or “Reset
(All Colors)” in the “C.M.S.” menu on
the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Overview of All Color
Settings
Select “View Settings” in the “C.M.S.”
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Description
“Lightness”, “Chroma” and “Hue”
of the color selected for “Target”
are reset.
“Lightness”, “Chroma” and
“Hue” of all colors are...

Basic Operation
-53
Adjusting Computer Images
Use the Fine Sync function in case of irregularities such as vertical stripes or flickering in
portions of the screen.
When Auto Sync is OFF
When “Auto Sync” is “OFF”, interference
such as flickering or vertical stripes may oc-
cur if displaying tilings or vertical stripes.
Should this occur, adjust “Clock”, “Phase”,
“H-Pos” and “V- Po s” for obtaining an opti-
mum image.
Select “Clock”, “Phase”, “H-Pos” or “V-
Pos” in the “Fine Sync” menu  on the
menu...

Selecting Adjustment Settings
Adjustment settings stored in the projector
can be easily accessed.
Select “Select Setting” in the “Fine
Sync” menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
•If a memory position has not been set, a
resolution and frequency setting will not
be displayed.
•When selecting a stored adjustment set-
ting with “Select Setting”, you can set the
projector in the stored adjustments.
Special Mode Settings
Ordinarily, the type of input signal is...

Basic Operation
-55
Checking the Input Signal
This function allows you to check the current
input signal information.
Select “Signal Info” in the “Fine Sync”
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Auto Sync Adjustment
Used to automatically adjust a computer image.
Select “Auto Sync” in the “Fine Sync”
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
When setting to “ Normal” or
“
 High Speed”:
•Auto Sync adjustment will occur when...

Auto Sync Display
Function
Used to set the screen displayed during Auto
Sync.
Select “Auto Sync Disp” in the “Fine
Sync” menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Description
The image set as a back-
ground image is projected.
The computer image being
adjusted is displayed.
Selected item
-56
Adjusting Computer Images 

Easy to Use Functions
Easy to Use Functions 

-58
Selecting the Picture Display Mode
Switching the Picture
Display Using Different
Input Signals
Press .
•Each time  is pressed, the display
changes as shown on pages 59 and 60.
Info
•In the Dot by Dot Mode, images are dis-
played in the original resolution, therefore
they will not be enlarged.
•To return to the standard image, press 
while “RESIZE” is displayed on the screen.
This function allows you to modify or customize the picture display mode to enhance the
input image. Depending on the input...