Sharp Xv Z10000e Projector User Manual

							Basic Operation
-49
Adjusting the Gamma
Adjust the gamma curve to suit your prefer-
ences. These gamma values can be adjusted
only when the gamma position is set to “Cus-
tom 1” or “Custom 2”.
Select the gamma item in the “Gamma”
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Selected Item Description\ button| || |
| button
R-Gamma(Red Gamma)
G-Gamma
(Green Gamma)
B-Gamma(Blue Gamma)
R-Gain
(Red Gain)
G-Gain
(Green Gain)
B-Gain
(Blue Gain)
R-Offset
(Red Offset)
G-Offset
(Green Offset)
B-Offset
(Blue Offset)For adjusting the display characteristic of red color
For adjusting the display characteristic of green color
For adjusting the display characteristic of blue color
For adjusting the contrast level of red color
For adjusting the contrast level of green color
For adjusting the contrast level of blue color
For adjusting the brightness level of red color
For adjusting the brightness level of green color
For adjusting the brightness level of blue colorFor giving greater depth to brighter
portion of image in red color.
For giving greater depth to brighter
portion of image in green color.
For giving greater depth to brighter
portion of image in blue color.
For less contrast in red color
For less contrast in green color
For less contrast in blue color
For less brightness in red color
For less brightness in green color
For less brightness in blue colorFor giving greater depth to darker
portion of image in red color.
For giving greater depth to darker
portion of image in green color.
For giving greater depth to darker
portion of image in blue color.
For more contrast in red color
For more contrast in green color
For more contrast in blue color
For more brightness in red color
For more brightness in green color
For more brightness in blue color 
						

							Color Management System (C. M. S.)
This function allows you to individually adjust the display characteristics of six colors (R:
Red, Y: Yellow, G: Green, C: Cyan, B: Blue, M: Magenta) .
RedCyan
YellowBlue
GreenMagenta
Selecting the Color
Reproduction Mode
Select “Color Selected” in the “C.M.S.”
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
•If “Standard” is selected for “Color Se-
lected”, other items (e.g., Target) cannot
be adjusted.
Selecting the Target
Color
Select “Ta r g e t” in the “C.M.S.” menu on
the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Description
Sharp default setting
“Lightness”, “Chroma” and
“Hue” can be adjusted for each
of the six colors.
Selected item
Standard
Custom 1-3
-50 
						

							Basic Operation
-51
Setting the Brightness
of the Target Color
Select “Lightness” in the “C.M.S.”
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Setting the Chromatic
Value of the Target
Color
Select “Chroma” in the “C.M.S.” menu
on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Setting the Hue of the
Target Color
Select “Hue” in the “C.M.S.” menu on
the menu screen.
➝For operating the menu screen, see
pages 40 to 43. 
						

							Color Management System (C.M.S.)
Resetting User-Defined
Color Settings
Select “Reset (This Color)” or “Reset
(All Colors)” in the “C.M.S.” menu on
the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Overview of All Color
Settings
Select “View Settings” in the “C.M.S.”
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Description
“Lightness”, “Chroma” and “Hue”
of the color selected for “Target”
are reset.
“Lightness”, “Chroma” and
“Hue” of all colors are reset.
Selected item
Reset
(This Color)
Reset
(All Colors)
-52 
						

							Basic Operation
-53
Adjusting Computer Images
Use the Fine Sync function in case of irregularities such as vertical stripes or flickering in
portions of the screen.
When Auto Sync is OFF
When “Auto Sync” is “OFF”, interference
such as flickering or vertical stripes may oc-
cur if displaying tilings or vertical stripes.
Should this occur, adjust “Clock”, “Phase”,
“H-Pos” and “V- Po s” for obtaining an opti-
mum image.
Select “Clock”, “Phase”, “H-Pos” or “V-
Pos” in the “Fine Sync” menu  on the
menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
•Computer image adjustments can be made
easily by pressing 
. See page 55 for
details.
Saving Adjustment
Settings
This projector allows you to store up to seven
adjustment settings for use with various com-
puters.
Select “Save Setting” in the “Fine Sync”
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Selected Item Description
Clock
Phase
H-Pos
V- Po sAdjusts vertical noise.
Adjusts horizontal noise (similar to tracking on your VCR).
Centers the on-screen image by moving it to the left or right.
Centers the on-screen image by moving it up or down. 
						

							Selecting Adjustment Settings
Adjustment settings stored in the projector
can be easily accessed.
Select “Select Setting” in the “Fine
Sync” menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
•If a memory position has not been set, a
resolution and frequency setting will not
be displayed.
•When selecting a stored adjustment set-
ting with “Select Setting”, you can set the
projector in the stored adjustments.
Special Mode Settings
Ordinarily, the type of input signal is detected
and the correct resolution mode is automati-
cally selected. However, for some signals, the
optimal resolution mode in “Special Modes” on
the “Fine Sync” menu screen may need to be
selected to match the computer display mode.
Set the resolution by selecting “Special
Modes” in the “Fine Sync” menu on the
menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
•Avoid displaying computer patterns which
repeat every other line (horizontal stripes).
(Flickering may occur, making the image
hard to see.)
•When a DVD player or Digital Video is con-
nected, select 480P as the input signal.
•See “Checking the Input Signal” on the next
page for information on the currently selected
input signal.
-54
Adjusting Computer Images 
						

							Basic Operation
-55
Checking the Input Signal
This function allows you to check the current
input signal information.
Select “Signal Info” in the “Fine Sync”
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Auto Sync Adjustment
Used to automatically adjust a computer image.
Select “Auto Sync” in the “Fine Sync”
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
When setting to “ Normal” or
“
 High Speed”:
•Auto Sync adjustment will occur when the
projector is turned on or when the inputs
are switched, when connected to a com-
puter.
Manual adjustments should be per-
formed:
•When the optimum image cannot be
achieved with Auto Sync adjustment. See
page 53.
•Auto Sync adjustment may take some
time to complete, depending on the im-
age of the computer connected to the pro-
jector.
•When setting “Auto Sync” to “OFF” or
“High Speed”, and if 
is pressed Auto
Sync will be executed in “High Speed”
mode. If the button is pressed again
within one minute, Auto Sync will be ex-
ecuted in “Normal” mode.
AUTO SYNC button
Screen display during Auto Sync 
						

							Auto Sync Display
Function
Used to set the screen displayed during Auto
Sync.
Select “Auto Sync Disp” in the “Fine
Sync” menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Description
The image set as a back-
ground image is projected.
The computer image being
adjusted is displayed.
Selected item
-56
Adjusting Computer Images 
						

							Easy to Use Functions
Easy to Use Functions 
						

							-58
Selecting the Picture Display Mode
Switching the Picture
Display Using Different
Input Signals
Press .
•Each time  is pressed, the display
changes as shown on pages 59 and 60.
Info
•In the Dot by Dot Mode, images are dis-
played in the original resolution, therefore
they will not be enlarged.
•To return to the standard image, press 
while “RESIZE” is displayed on the screen.
This function allows you to modify or customize the picture display mode to enhance the
input image. Depending on the input signal, you can choose “SIDE BAR”, “SMART STRETCH”,
“CINEMA ZOOM”,  “STRETCH”, “NORMAL” or “DOT BY DOT” image.
RESIZE
button
Screen display of the picture display mode
-58
RESIZE button