Sharp Xv Z10000e Projector User Manual

Basic Operation
-39
 INPUT 3 / 4 Mode
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
Page 70 +30 –30
+30 –30
+30 –30
+30 –30
+30 –30
11500 5500
Main menu Sub menu
Main menu Sub menu
Picture
Page 44Contrast
Bright
Color
Tint
Sharp
CLR Temp
Reset
Progressive Mode
2D Progressive
3D Progressive
Film Mode
PRJ Mode
Front
Ceiling + Front
Rear
Ceiling + Rear RS-232C
9600 bps
38400 bps
115200 bps
Language
Page 34
Status
+30 –30+30 –30
Custom 3 Custom 1
+30 –30
Color Selected
Target...

This projector has two sets of menu screens that allow you to adjust the image and various
projector settings.
You can operate the menus from the projector or remote control using the following proce-
dure.
Using the Menu Screen
Menu screen for INPUT 1,
INPUT 2 or INPUT 5 RGB modeMenu screen for INPUT 3,
INPUT 4 or INPUT 5 VIDEO Mode
Menu Bar
(Main Menu)
" "" "
"Menu Screen
Menu Selections
(Adjustments)
1Press .
•The menu screen is displayed.
Note
•The “Picture” menu screen for the...

Basic Operation
-41
2Press 
\ \\ \
\ or 
| || |
| to select the
menu you want to adjust.
Note
•For details on the menus, see the
tree charts on pages 38 and 39.
3Press 
" "" "
" or 
' '' '
' to select the item
you want to adjust.
Note
•To display a single adjustment item,
press 
 after selecting the item.
Only the menu bar and the selected
adjustment item will be displayed.
Then if you press " or ', the fol-
lowing item (“Bright” after “Con-
trast”) will be...

 Menu screen
Menu Selections
(Settings)
1Press .
•The menu screen is displayed.
Note
•The “Picture” menu screen for the
selected input mode is displayed.
•The on-screen displays shown on
the lower right are displayed when
INPUT 1, 2 or 5 mode is selected
while RGB signals are input.
2Press 
\ \\ \
\ or 
| || |
| to select the
menu you want to adjust.
Note
•For details on the menus, see the
tree charts on pages 38 and 39.
3Press 
" "" "
" or 
' '' '
' to select...

Basic Operation
-43
Sub menu
4Press 
| || |
|.
•The cursor shifts to the sub menu.
5Press 
" "" "
" or 
' '' '
' to select the set-
ting of the item displayed in the
sub menu.
6Press .
•The item selected is set.
Note
•Some adjustment items will display
a confirmation message.
When setting an item, press \ or
| to select “Ye s” or “OK” and then
press 
.
•Use 
 to select “ON” or “OFF” for
the item of “Economy Mode”.
7Press .
•The menu will disappear. 

Adjusting the Picture
You can adjust the projector’s picture to your preferences with the following picture settings.
Adjusting Image Prefer-
ences
Note
•First select “INPUT # Memory” when you
want to save the “Picture” menu settings.
See page 47 for details.
Adjust the “Picture” menu on the menu
screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
•Picture adjustment settings differ depend-
ing on the type of input signal.
•The picture adjustments can be stored
separately in each input...

Basic Operation
-45
Emphasizing the
Contrast
This function emphasizes the bright portions
of images to obtain a higher contrast image.
Select “White Emphasis” in the “Pic-
ture” menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
•ON
Emphasizes the bright portions of images.
•OFF
Disables “White Emphasis”.
Selecting the C.M.S.
Color
This function allows you to select the desired
color reproduction mode.
Select “Color Selected” in the “Picture”
menu on the menu screen.
➝For...

Progressive Mode
This function allows you to select the pro-
gressive display of a video signal. The pro-
gressive display projects a smoother video
image.
Select “Progressive Mode” in the “Pic-
ture” menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
• 2D Progressive
This function is useful to display fast-
moving images such as sports and ac-
tion films. This mode optimizes the im-
age in a displayed frame.
•
 3D Progressive
This function is useful to display relatively...

Basic Operation
-47
Picture Setting Func-
tion
This function stores all items set in “Picture”.
Five settings can be stored separately in
“Memory 1” to “Memory 5”. Each stored set-
ting is reassigned to each input mode (INPUT
1 to INPUT 5). Even when the input mode or
signal is changed, you can easily select opti-
mal settings from the stored settings.
When Saving:
Select “Memory #” or “INPUT # Memory”
before setting on the “Picture” menu.
Select “Picture Setting” in the “Picture”
menu on the menu...

Adjusting the Gamma
Use this function to select the gamma position and adjust the gamma curve for finer image
adjustment.
Selecting the Gamma
Position
Select “Gamma Position” in the
“Gamma” menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
•The gamma position you make the set-
ting in this menu for can be selected in
the “Gamma Position” in the “Picture”
menu.
•Select “Custom 1” or “Custom 2” to make
the more detailed gamma setting.
•For selecting “SVM Gamma”, refer to...