Sharp Projector Pg C45x User Manual

Easy to Use Functions
-57
Displaying Dual Pictures (Pict in Pict)
Picture in Picture function allows you to display two pictures on the same screen. You can
display the image input from INPUT 3 or 4 as an inset picture overlapping the main picture
from INPUT 1 or 2.
Displaying the Inset Picture
1Press .
2Press  or  on the remote
control or 
 on the projector
to switch the image in the in-
set picture .
3Press 
' '' '
', 
" "" "
", 
\ \\ \
\ and 
| || |
| to set...

58
Black Screen Function
-58
BLACK SCREEN
button
" Projected Image
This function can be used to display a black screen.
Blacking out the Pro-
jected Image
1Press .
•The screen turns black and “BLACK
SCREEN” is displayed on the screen.
2To return to the original
projected image, press 
again. 

Easy to Use Functions
-59
Displaying the Break Timer
"On-screen Display
Displaying and Setting
the Break Timer
1Press . The break timer
starts to count down from 5
minutes.
2When “” is displayed, press
' '' '
' , 
" "" "
" , 
\ \\ \
\ or 
| || |
|  to set the break
timer.
•You can set anywhere between 1 and
60 minutes (in 1 minute units).
•The break timer starts to count down
as soon as ' , " , \ or | is pressed.
3Press  to cancel the break
timer.
Note...

-60
Color Management System (C. M. S.)
Selecting the Color
Reproduction Mode
Select “Color Selected” in the “C.M.S.”
menu on the menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
Note
•For additional information about sRGB
function, visit “http://www.srgb.com/”.
•“sRGB” cannot be selected for “Color Se-
lected” on the C.M.S. menu when “Com-
ponent” is selected for “Signal Type” on
the “Picture” menu.
•When “sRGB” is selected;
•The gamma correction cannot be set.
•“Red”, “Blue” or “CLR...

Easy to Use Functions
-61
Setting the Brightness
of the Target Color
Select “Lightness” in the “C.M.S.”
menu on the menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
Setting the Chromatic
Value of the Target
Color
Select “Chroma” in the “C.M.S.” menu
on the menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
Setting the Hue of the
Target Color
Select “Hue” in the “C.M.S.” menu on
the menu screen.
➝ For operating the menu screen, see
pages 42 to 45. 

-62-62
Color Management System (C.M.S.)
Resetting User-Defined
Color Settings
Select “Reset (This Color)” or “Reset
(All Colors)” in the “C.M.S.” menu on
the menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
Overview of All Color
Settings
Select “View Settings” in the “C.M.S.”
menu on the menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
Description
“Lightness”, “Chroma” and “Hue” of the
color selected for “Target” are reset.
“Lightness”, “Chroma” and “Hue” of
all colors...

Easy to Use Functions
-63
Setting the Audio Out-
put Type
Select “Audio Out” in the “Options (1)”
menu on the menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
Setting on/off the Inter-
nal Speaker
Select “Speaker” in the “Options (1)”
menu on the menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
Setting on/off the Internal Speaker
This function allows you to set on/off the internal speaker.
Setting the Audio Output Type
Selected Item
FAO
(Fixed audio output)
Description...

-64
Auto Search Function
This function automatically searches for and switches to the input mode in which signals
are being received, when the projector is turned on, or when the INPUT button is pressed.
-64
Using Auto Search
Select “Auto Search” in the “Options
(1)” menu on the menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
Note
• ON
Automatically switches to the input mode
in which signals are being received, when
turning on the projector or pressing 
 on
the projector.
•
 OFF
For...

Easy to Use Functions
-65
Video Digital Noise Reduction (DNR) System
Reducing Image Noise
Select “DNR” in the “Options (1)” menu
on the menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
Note
•Set a level so as to view a clearer picture.
Make sure to set DNR to “OFF” in the fol-
lowing cases:
•When the image is blurry.
•When the contours and colors of moving
images drag.
•When TV broadcasts with weak signals
are projected.
Info
•This function is available with INPUT 1, 2
(480
I, 480P, 580I...

-66
Setting the Video System
Setting the Video
System
Select “Video System” in the “Options
(1)” menu on the menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
Note
•The video signal can only be set in IN-
PUT 3 or INPUT 4 mode.
•In “Auto”, images are displayed in PAL
even if PAL-N or PAL-M input signals are
received.
When connected to PAL video equipment.
When connected to SECAM video
equipment.
When reproducing NTSC signals in
PAL video equipment.
When connected to NTSC video equipment....