Sharp Projector Pg C45x User Manual

Easy to Use Functions
-67
Saving Projected Images
•This projector allows you to capture projected images (RGB signals) and set them as a
startup image, or background image when no signals are being received.
•You can capture the images that are input using RGB signals.
Capturing the Image
Select “Image Capture” in the “Options
(1)” menu on the menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
1Press 
' '' '
' or 
" "" "
" to select
“
 Save Image”...

68
Setting a Background Image
This function allows you to select the image displayed when no signal is being sent to the projector.
*1 You can set a captured image as a background image by selecting “Custom”.
*2 If the input signal has interference, the screen will be displayed with the interference.
Selecting a
Background Image
Select “Background” in the “Options
(1)” menu on the menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
Note
•When “Custom” is selected, an image
saved using...

Easy to Use Functions
-69
Selecting the Economy Mode
These functions allow you to reduce the power consumption of the projector.
Setting the Power Save
Mode
Select “Power Save” in “Economy
Mode” under the “Options (1)” menu on
the menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
Note
•Although lamp life and noise are improved
when “Power Save” is set to “ON”, bright-
ness decreases by 20%.
•“Power Save” mode is factory preset to
“OFF”.
Monitor Out/RS-232C
Off Function
This projector...

-70-70
Remaining Lamp Life
(Percentage)
Displaying the Remaining Lamp Life (Percentage)
Checking the Remaining
Lamp Life (Percentage)
This function allows you to check the remain-
ing lamp life (percentage).
Select the “Options (2)” menu on the
menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
Note
•It is recommended that the lamp be
changed when the remaining lamp life
becomes 6%.
For lamp replacement, contact your
nearest Sharp Authorized Projector
Dealer or Service Center.
•The table...

Easy to Use Functions
-71
Reversing/Inverting Projected Images
This projector is equipped with a reverse/invert image function that allows you to reverse or
invert the projected image for various applications.
Setting the Projection
Mode
Select “PRJ Mode” in the “Options (2)”
menu on the menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
Note
•If a password has been set, the password
input box will be displayed when select-
ing the “PRJ Mode”.
•This function is used for the reversed im-...

-72
Canceling the Keylock
Setting
When the Keylock Level is set to “Normal”,
all buttons are functional.
Select “Keylock Level” in the “Options
(2)” menu on the menu screen and set
“ Normal”.
➝ For operating the menu screen, see
pages 42 to 45.
Note
•When a password has been set, and
“Keylock Level” is selected, the password
input box will be displayed.
•If both a password and the Keylock Level
have been set at the same time, the pass-
word will be necessary before changing
the Keylock Level.
Selecting...

Easy to Use Functions
-73
Setting up a Password
Entering the Password
Select “Password” in the “Options (2)”
menu on the menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
1Press 
' '' '
' or 
" "" "
" to select the de-
sired number and then press
| || |
|.
2Enter the 3 remaining digits
and press 
.
3Enter the password again in
“Reconfirm” and press 
.
Note
•When a password is set, you need
to enter the password to change
“PRJ Mode”, “Keylock Level”,...

-74
Changing the Password
Select “Password” in the “Options (2)”
menu on the menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
1Press 
' '' '
', 
" "" "
" and 
| || |
| to enter the
password in “Old Password”
and press 
.
2Press 
' '' '
', 
" "" "
" and 
| || |
| to set the
new password and press 
.
3Enter the new 4-digit password
again in “Reconfirm” and
press 
.
Note
•If you do not want to set a password,...

Easy to Use Functions
-75
Setting the Anti-Theft
The anti-theft function prevents unauthorized use of the projector. You can choose to use
this function or not. If you do not want to use this function, just do not enter the keycode.
Once the anti-theft function is activated, users will need to enter the correct keycode each
time the projector is turned on. Failure to enter the correct keycode will cause images not to
be projected. The following procedures explain how to use this function.
Entering the...

-76-76
Setting the Anti-Theft
2Enter the remaining 3 digits by
pressing any buttons you like.
3Enter the same keycode once
more in “Reconfirm”.
Note
•The Keylock function will become
temporarily disabled.
When “Anti-Theft” is set, the keycode
inputting box appears after the power
is turned on. When it appears, enter the
right keycode.
•Press the buttons on the remote control if
the buttons on the remote control are used
for setting the keycode. In the same manner,
press the buttons on the projector if...