Sharp Projector Pg C45x User Manual

Introduction
-7 18. Damage Requiring Service
Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen
into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions, as an...

-8
IMPORTANT SAFEGUARDS
Be sure to read the following safeguards when setting up
your projector.
Caution concerning the lamp unit

Potential hazard of glass particles if
lamp ruptures. In case of lamp rupture,
contact your nearest Sharp Authorized
Projector Dealer or Service Center for
a replacement.
See “Replacing the Lamp” on page 85.
Cautions concerning the setup of the projector

For minimal servicing and to maintain high image qual-
ity, SHARP recommends that this projector be installed
in an area...

Introduction
-9
PDF operation manuals in several languages are included in the CD-ROM, so that you can
work with the projector, even if you do not have this manual. To utilize these manuals, you
need to install Adobe Acrobat Reader on your PC (Windows or Macintosh). If you have not
installed Acrobat Reader yet, you can install it from the CD-ROM.
To install Acrobat Reader from the CD-ROM
For Windows:
1Insert the CD-ROM in the CD-ROM drive.
2Double click the “My Computer” icon.
3Double click the “CD-ROM”...

-10
Projector (Front and Top View)
Part Names
34
34
83
83
39
42
35
38
50
42
35
43
27
27
Power (ON/OFF) 
buttons 
Turn the power on or off.
Power indicatorIlluminates red, when the 
projector is in standby. 
When the power is turned 
on, this indicator will 
illuminate green.
Lamp replacement 
indicator
Illuminates green indicating 
normal function. Replace 
the lamp when the indicator 
illuminates red.
Temperature warning 
indicator
When the internal 
temperature rises, this 
indicator will illuminate...

Introduction
-11
Projector (Rear View)
Using the Kensington Lock
•
This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security
System. Refer to the information that came with the system for instructions on how to use it to secure the
projector.
17
80
AC socket
Exhaust vent
27
18
18
Kensington Security 
Standard connector
Adjustment Feet INPUT 2 terminal
Terminal for 
computer RGB and 
component signals.
INPUT 1 terminalTerminal for 
computer RGB and...

-12
Remote Control (Front View)
Part Names
38KEYSTONE buttonFor adjusting Keystone or Digital 
Shift setting.
26    WIRED R/C JACKFor controlling the projector by 
connecting the remote control to the 
projector.
34Power (ON/OFF) buttonsFor turning the power on or off.
42MENU buttonFor displaying adjustment and 
setting screens.
42Adjustment buttons
(', ", \, |)
For selecting menu items.
42ENTER buttonFor setting items selected or 
adjusted on the menu.
39UNDO buttonFor undoing an operation or...

Introduction
-13
23 (7 m)30°
30°45°
Using the Remote Control

The remote control can be used to control the projector
within the ranges shown in the illustration.
Note
•The signal from the remote control can be reflected off a screen
for easy operation. However, the effective distance of the signal
may differ due to the screen material.
When using the remote control:
•Be sure not to drop, expose to moisture or high temperature.
•The remote control may malfunction under a fluorescent lamp.
Under that...

-14
Accessories
Remote control
RRMCGA029WJSA
Two R-6 batteries
(“AA” size, UM/SUM-3, HP-7 or similar)
Power cord
For U.S., Canada, etc.
(1110 (3.6m))
QACCDA010WJPZFor Europe, except U.K.
(6 (1.8m))
QACCV4002CEZZFor U.K., Hong Kong and
Singapore
(6 (1.8m))
QACCBA012WJPZFor Australia, New
Zealand and Oceania
(6 (1.8m))
QACCL3022CEZZ
Note
•Depending on the region, projectors are shipped only one power cord (see above). Use the power cord
that corresponds to the wall outlet in your country.
3 RCA to 15-pin...

Connections and Setup
Connections and Setup 

-16
Connecting the Projector to Other Devices
Before Connecting
Note
•Before connecting, be sure to turn off both the projector and the devices to be connected. After making all
connections, turn on the projector and then the other devices.
When connecting a computer, be sure that it is the last device to be turned on after all the connections are
made.
•Be sure to read the operation manuals of the devices to be connected before making connections.
This projector can be connected to:
A computer using:...