Sharp Mx5001n Owners Manual

9
SPECIFICATIONS
Continuous copying speeds*
* Copy speed during output of the second copy and following copies when performing continuous one-sided copying of the same 
page (excluding offset output) using plain one-sided paper from a tray other than the bypass tray.
ModelMX-4100N/MX-4101N MX-5000N/MX-5001N
Copy ratio100% / Reduced / Enlarged
Copy modeColour  copying Black and white copying Colour  copying Black and white copying
11 x 17, A3, 8K19 copies/min. 19 copies/min. 22 copies/min. 22 copies/min....

10
SPECIFICATIONS
Acoustic noise emission (measurement according to ISO7779)
Automatic document feeder specifications
*1 Scanning in mono 2 mode of one side only is possible in fax and scan send modes. However, when the resolution is 600 x 600 dpi 
in Internet fax mode, the maximum length is 800 mm (31-31/64). When the resolution is 400 x 400 dpi or 600 x 600 dpi in scan 
mode, a long original cannot be scanned.
*2 Paper weights from 35g/m
2 (9 lbs.) to 49g/m2 (13 lbs.) require the use of slow scan...

11
SPECIFICATIONS
Exit tray unit (right tray) specifications
* The maximum number of sheets that can be held varies depending on ambient conditions in the installation location, the type of 
paper, and the storage conditions of the paper. Envelopes, tab paper, and glossy paper cannot be output.
Stand/1x500 sheet paper drawer specifications
ModelMX-TRX2
Output methodFace-down output
Output capacity*100 sheets (using SHARP-recommended A4 or 8-1/2 x 11 paper)
Dimensions
When tray is folded up:
289 mm (W) x...

12
SPECIFICATIONS
Stand/2x500 sheet paper drawer specifications
Large capacity tray specifications*
* A stand/1x500 sheet paper drawer or stand/2x500 sheet paper drawer is required to connect the large capacity tray to the machine.
ModelMX-DEX9
Paper sizesA3, B4, A4, A4R, B5, B5R, 11 x 17, 8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 
8-1/2 x 11, 8-1/2 x 11R, 7-1/4 x 10-1/2R, 8K, 16K, 16KR
Paper weightPlain paper (60g/m2 to 105g/m2 (16 lbs. to 28 lbs.)), heavy paper (106g/m2 to 209g/m2 (28lbs....

13
SPECIFICATIONS
Finisher specifications
*1 The maximum number of sheets that can be held varies depending on ambient conditions in the installation location, the type of 
paper, and the storage conditions of the paper.
*2 Up to 10 envelopes can be output.
*3 The height of the sheets must not exceed 71 mm (2-51/64).
*4 The height of the sheets must not exceed 35.5 mm (1-13/32).
*5 The maximum number of sheets for stapling assumes a paper weight of 90g/m
2 (24 lbs.) and includes two cover sheets of...

14
SPECIFICATIONS
Finisher (large stacker) specifications*1
*1 Paper pass unit and stand/1x500 sheet paper drawer or stand/2x500 sheet paper drawer are required to connect the finisher (large 
stacker) to the machine.
*2 The maximum number of sheets that can be held varies depending on ambient conditions in the installation location, the type of 
paper, and the storage conditions of the paper.
*3 Up to 100 sheets of non-standard size paper, envelopes, and transparency film (A4 (8-1/2 x 11)) can be...

15
SPECIFICATIONS
Saddle stitch finisher specifications*1
*1 Paper pass unit and stand/1x500 sheet paper drawer or stand/2x500 sheet paper drawer are required to connect the finisher 
(large stacker) to the machine.
*2 The maximum number of sheets that can be held varies depending on ambient conditions in the installation location, the type of 
paper, and the storage conditions of the paper.
*3 Up to 30 envelopes can be output.
*4 The height of the sheets must not exceed 175 mm (6-57/64).
*5 The height...

16
SPECIFICATIONS
Punch module specifications (for finisher)
Punch module specifications (for finisher (large stacker))
ModelMX-PNX1A MX-PNX1B MX-PNX1C MX-PNX1D
Hole punching2 holes 2 holes or 3 holes 4 holes 4 holes, broad width
Allowed paper sizes for 
punching
A3, B4, A4, A4R, B5, 
B5R, 11 x 17, 
8-1/2 x 14, 
8-1/2 x 13-1/2, 
8-1/2 x 13-2/5, 
8-1/2 x 13,  
8-1/2 x 11, 
8-1/2 x 11R, 
7-1/4 x 10-1/2, 8K, 
16K, 16KR2 holes:
8-1/2 x 14, 
8-1/2 x 13-1/2, 
8-1/2 x 13-2/5, 
8-1/2 x 13, 
8-1/2 x 11R, 
7-1/4 x...

17
SPECIFICATIONS
Punch module specifications (for saddle stitch finisher)
Keyboard specifications
Printer specifications
*1 When the PS3 expansion kit is installed and the machine is used as a PostScript printer.
*2 When the XPS expansion kit is installed.
*3 Barcode font kit is required.
*4 Supported operating systems are Windows 2000/XP/Vista.
*5 To install the XPS expansion kit, an expansion memory board is required.
ModelMX-PNX5A MX-PNX5B MX-PNX5C MX-PNX5D
Hole punching2 holes 2 holes or 3 holes 4...

18
SPECIFICATIONS
Network scanner / Internet Fax*1 specifications
*1 Internet fax expansion kit is required.
*2 Enhanced compression kit is required.
*3 Total number of all destinations (Scan to E-mail, Scan to FTP, Scan to Desktop, Scan to Network folder, Internet Fax, Fax, and 
Group)
Pull scan function (TWAIN) specifications
TypeBuilt-in
Scanning resolution (dpi)
100 x 100, 200 x 200, 300 x 300, 400 x 400, 600 x 600
Internet Fax: 200 x 100, 200 x 200, 200 x 400, 400 x 400, 600 x 600 (200 x 100, 200 x...