Sharp MX M200D User Manual

49
COPY FUNCTIONS
4
SELECTING THE TRAY
By default the auto paper select function (page 47) operates, and thus the appropriate tray is automatically selected 
when the original is placed on the document glass or in the document feeder tray, or when the original size is 
specified. If you wish to use a tray other than the automatically selected tray (for example you wish to enlarge or 
reduce the copy or use the bypass tray), press the [PAPER SELECT] key to select the desired tray.
Auto tray switching
If...

50
COPY FUNCTIONS
SELECTING THE ORIGINAL SIZE
If you loaded a non-standard size* original or the original size was not correctly detected, set the original size manually.
Perform the following steps after placing the document in the document feeder tray or on the document glass.
1Press the [SPECIAL FUNCTION] key.
The special function 
screen will appear.
2Select ORIG. SIZE ENTER from the 
menu with the [ ] or [ ] key.
3Press the [OK] key.
The original size selection 
screen will appear.
4Select the...

51
COPY FUNCTIONS
4
USING THE BYPASS TRAY TO COPY A SPECIAL SIZE ORIGINAL
When the bypass tray is being used for copying and an original that is placed on the document glass is detected as 
being a special size, the display will prompt the user to set the original size. To make a copy in this type of situation, 
follow the steps below.
1Load paper in the bypass tray and place 
the original on the document glass.
2Touch the [PAPER SELECT] key and 
then select the bypass tray.
A message will appear asking...

52
REDUCING OR ENLARGING A COPY
There are three ways to enlarge and reduce copies:
 Automatic selection of a ratio according to the paper size: Auto ratio selection
 Specifying a ratio from 25% to 400%: Preset ratios/zoom
 Selecting the vertical and horizontal ratios separately: XY zoom
AUTOMATIC RATIO SELECTION
1Place the original in the document 
feeder tray or on the document glass.
The original size will appear in the display. If the 
correct size does not appear, see SELECTING THE 
ORIGINAL SIZE...

53
COPY FUNCTIONS
4
3Select a preset ratio with the [ ] or 
[ ] key, or set the ratio (zoom) with 
the [ ] or [ ] key.
[ ] key: Select a larger preset ratio
[ ] key: Select a smaller preset ratio
[ ] key: Decrease the ratio in increments of 1%
[ ] key: Increase the ratio in increments of 1%
 Preset reduction ratios are: 86%, 81%, 70%, 50% 
and 25% (95%, 77%, 64%, 50% and 25%). 25% can 
only be selected when the original is placed on the 
document glass.
 Preset enlargement ratios are: 115%, 122%, 141%,...

54
SELECTING THE VERTICAL AND 
HORIZONTAL COPY RATIOS SEPARATELY
(XY zoom copying)
Separate ratio settings can be selected for the length and width of a copy.
Example: Reduction only in the horizontal direction
 This feature cannot be used with the 2 in 1 / 4 in 1 feature or card shot feature.
 To use the XY zoom feature and the dual page copy feature simultaneously, set the dual page copy feature first 
and then the XY zoom feature. (Enlargement cannot be set.)
 If automatic ratio selection has been...

55
COPY FUNCTIONS
4
7Press the   key.
The vertical ratio can now be selected.
8Set the vertical ratio with the [ ], [ ], 
[ ], or [ ] keys.
A preset ratio can be selected 
with the [ ] or [ ] keys. The 
ratio can be adjusted in 
increments of 1% with the [ ] 
or [ ] keys.
To change the copy ratio in the 
horizontal direction again, press 
the  key.
9Press the [OK] key.
You will return to the base 
screen.
10Make sure that the desired paper tray 
is selected.
If the auto paper select function has been...

56
TWO-SIDED COPYING
TWO-SIDED COPYING
The machine is capable of the following types of automatic two-sided copying. The copy paper is turned over 
automatically, allowing two-sided copying to be accomplished with ease.
Original → Paper
Document glassOne-sided original 
→ Two sides\
SPFOne-sided original 
→ Two sides\
RSPFOne-sided original 
→ Tw o  s i d e sTwo-sided original→ Two sidesTwo-sided original→ One side
 There are restrictions on the paper that can be used for automatic two-sided copying. See...

57
COPY FUNCTIONS
4
TWO-SIDED COPYING OF ONE-SIDED ORIGINALS
 Paper sizes that can be used are A3, B4, A4, A4R, B5, B5R, A5, 11 x 17, 8-1/2 x 14, 8-1/2 x 13, 8-1/2 x 11 
and 8-1/2 x 11R.
 Automatic two-sided copying is not possible when the bypass tray is used.
Copying from the SPF
1Make sure that an original does not 
remain on the document glass, and 
then adjust the original guides to the 
width of your originals and place the 
originals face up in the document 
feeder tray.
If you placed an odd...

58
COPY FUNCTIONS
Copying from the document glass
1Place the original for the front side of 
the copy on the document glass, and 
close the SPF.
2Press the [2-SIDED COPY] key.
The duplex mode selection 
screen appears.
3Select 1 to 2 with the [ ] or [ ] key, 
or with the [2-SIDED COPY] key.
4If you wish to have the orientation of 
the image on the back of the copy 
paper be opposite the orientation of 
the image on the front, set BINDING 
CHANGE to ON with the [ ] or [ ] 
key.
5Press the [OK] key.
You...