Sharp MX B200 User Manual

3
21
5Select the printer name (configured as a shared printer).
1Select the printer name (configured as a shared printer on a print 
server) from the list.
In Windows 2000/XP, you can also click the Add Network Port button 
displayed below the list and select the printer to be shared by browsing 
the network in the window that appears.
2Click the Next button.
Follow the on-screen instructions.
6You will return to the window of step 3. Click the Close 
button.
7This completes the installation of the...

3
22 CONFIGURING THE PRINTER DRIVER
After installing the MFP driver, you must configure the printer driver settings 
appropriately for the size of paper loaded in each.
1Click the Start button, click Control Panel, and then click 
Printer.
 In Windows 7, click the start button and then click Devices and 
Printers.
 In Windows XP, click the start button and click Printers and Faxes.
 In Windows 2000, click the Start button, select Settings, and then click 
Printers.
2Open the printer properties window....

3
23 SETTING UP BUTTON MANAGER
Button Manager is a software program that works with the scanner driver to enable 
scanning from the machine. 
To scan using the machine, Button Manager must be linked with the scan menu on 
the machine. Follow the steps below to link Button Manager to scanner events.
Windows XP/Vista/7
1Click the Start button, click Control Panel, click Hardware 
and Sound, and then click Scanners and Cameras.
 In Windows 7, click the start button and then click Devices and Printers. In...

3
24
Windows 2000
1Click the Start button, select Settings, and then click 
Control Panel. 
2Double-click the Scanners and Cameras icon.
3Select SHARP MX-xxxx and click the Properties button.
4In the Properties screen, click the Events tab.
5Select SC1: from the Scanner events 
pull-down menu.
6Select Sharp Button Manager Y in Send 
to this application.
7Click the Apply button.
8Repeat Steps 5 through 7 to link Button Manager to SC2: 
through SC6:.
Select SC2: from the Scanner events pull-down menu....

4
4
25
This chapter explains basic and other copying functions. 
The unit is equipped with a one-page memory buffer. This memory allows the unit to 
scan an original once only and make up to 99 copies. This feature improves 
workflow, reduces operation noise from the copier, and provides higher reliability by 
reducing wear and tear on the scanning mechanism.
COPY FLOW
1 Make sure that paper has been loaded in the paper tray (p.10) or 
multi-bypass tray (p.12), and check the paper size (p.9).
If paper is...

4
26
About interrupt copying
If you press the start ( ) key to begin a copy job while a print job using the paper 
tray or multi-bypass tray is in progress, the copy job will begin automatically after the 
print data in the units memory is printed (interrupt copying). When this is done, the 
print data remaining in the computer is not sent to the unit. When the copy job ends, 
press the clear key twice to change the unit to the online state, or wait until the set 
auto clear time (p.63) elapses. The...

4
27
Setting a large original
The original cover can be removed to allow copying of bulky objects.
1Simply lift the original cover straight
up.
2To reattach the original cover, reverse the above procedure.
Using the SPF (Peripheral device)
The SPF is designed to hold up to 50 originals measuring from A5 to A4 and weighting
from 56
g/m2 to 90g/m2.
1Make sure that no original is left on the document glass.
2Adjust the original guides to the 
size of originals.
3Set the originals face up in the 
document...

4
28 SET THE COPY QUANTITY
Set the number of copies using the two copy quantity ( , ) keys when copying 
from the document glass or copying from SPF.
 Press the right copy quantity key to set the unit digit 
from 0 to 9. This key will not change the tens digit.
 Press the left copy quantity key to set the tens digit 
from 1 to 9.
EXPOSURE ADJUSTMENT/PHOTO COPYING
Exposure adjustment
Copy density adjustment is not required for most originals in the automatic exposure 
mode. To adjust the copy density...

4
29
Automatic exposure adjustment
The automatic exposure level can be adjusted to suit your copying needs. This level is
set for copying from the document glass and copying from the SPF respectively.
1When adjusting the automatic exposure level for copying from 
the SPF, place an original in the document feeder tray and 
make sure that the SPF indicator lights up. When adjusting the 
level for copying from the document glass, make sure that no 
original is left in the document feeder tray.
2Press the...

4
30 REDUCTION/ENLARGEMENT/ZOOM
Three preset reduction ratios and two enlargement ratios can be selected. The zoom 
function enables copy ratio selection from 25% to 400% in 1% increments. (When 
the SPF is being used, the zoom copy ratio range is 50% to 200%.)
1Set the original and check the paper size.
2Use the copy ratio selector key and/or ZOOM ( ,  ) keys to 
select the desired copy ratio.
3Set the reduction/enlargement ratio.
To select a preset copy ratio:
Preset reduction and enlargement ratios...