Sharp MX B200 User Manual

2
11
4Gently push the paper tray back into the unit.
Be sure that paper is free of rips, dust, wrinkles, and curled or bent 
edges.
Make sure all the paper in the stack is the same size and type.
When loading paper, ensure there is no space between the paper and 
the guide, and check if the guide is not set too narrow causing the 
paper to bend. Loading paper in these ways will result in document 
skew or a paper jam.
When not using the unit for an extended period, remove all paper from   
the paper tray...

2
12 BYPASS FEED (including special paper)
The multi-bypass tray can be used to feed standard paper, transparency film, labels, 
envelopes, and other special purpose paper. Paper measuring from A6 to A4 
and in the weight range of 56g/m
2 to 128g/m2 can be used in this tray. (For paper 
weighing from 105g/m2 to 128g/m2, A4 is the maximum size.)
The multi-bypass tray
1Open the multi-bypass tray and extend the tray.
The multi-bypass tray can hold maximum of 50 sheets of paper. 
(Capacity will vary...

2
13
2Set the paper guides to the paper width. Insert the paper (print 
face down) all the way into the multi-bypass tray.
3Press the tray select ( ) key to select the multi-bypass tray.
Paper must be fed narrow side into the feed slot.

Special papers such as transparency film, labels, and envelopes 
must be fed one sheet at a time through the multi-bypass tray.
When copying onto transparency film, remove each copy 
promptly. Do not let copies stack up.
Note for loading envelopes
 Envelopes must be fed...

3
3
14
This chapter explains how to install and configure the software that is required for the
printer and scanner functions of the machine.
SOFTWARE
The Software CD-ROM that accompanies the machine contains the following 
software:
MFP driver
Printer driver
The printer driver enables you to use the printer function of the machine.
The printer driver includes the Print Status Window. This is a utility that monitors 
the machine and informs you of the printing status, the name of the document 
currently...

3
15 HARDWARE AND SOFTWARE REQUIREMENTS
Check the following hardware and software requirements in order to install the 
software.
*1 The machines USB 2.0 port will transfer data at the speed specified by the USB 2.0 
(Hi-Speed) standard only if the Microsoft USB 2.0 driver is preinstalled in the 
computer, or if the USB 2.0 driver for Windows 2000 Professional/XP/Vista that 
Microsoft provides through Windows Update is installed.
*2 Compatible with models preinstalled with Windows 2000 Professional,...

3
16 INSTALLING THE SOFTWARE
1The USB cable must not be connected to the machine. Make 
sure that the cable is not connected before proceeding.
If the cable is connected, a Plug and Play window will appear. If this 
happens, click the Cancel button to close the window and disconnect the 
cable.
2Insert the Software CD-ROM into your computers CD-ROM
drive.
3Click the Start button, click Computer, and then 
double-click the CD-ROM icon ( ).
 In Windows XP, click the start button, click My Computer, and...

3
17
8Click the MFP Driver button.
Click the Display Readme button to 
show information on packages that are 
selected.
9Select Connected to this 
computer and click the Next 
button.
Follow the on-screen instructions.
10You will return to the window of step 8. If you wish to install 
Button Manager or Sharpdesk, click the Utility Software 
button.
If you do not wish to install the Utility Software, click the Close button and 
go to step 12.
If you are using Windows Vista/7 and a security warning window...

3
18
Installing the Utility Software
11Click the Button Manager or the 
Sharpdesk button.
Click the Display Readme button to 
show information on packages that are 
selected.
Follow the on-screen instructions.
* In Windows 2000, The Sharpdesk 
button does not appear.
12When installing is finished, click the Close button.
A message will appear instructing you to connect the machine to your 
computer. Click the OK button.
13Connect the machine to your computer with a USB cable.
1Make sure that the machine...

3
19
14Follow the instructions in the plug and play window to install 
the driver.
When the Found New Hardware Wizard appears, select Install the 
software automatically (Recommended), click the Next button, and follow 
the on-screen instructions.
This completes the installation of the software.
 If you installed Button Manager, set up Button Manager as explained in SETTING 
UP BUTTON MANAGER (p.23).
 If you installed Sharpdesk, the Sharpdesk setup screen will appear. Follow the 
instructions in the...

3
20
Using the machine as a shared printer
If the machine will be used as a shared printer on a network, follow these steps to
install the printer driver in the client computer.
1Perform steps 2 through 6 in INSTALLING THE SOFTWARE
(p.16).
2Click the Custom button.
3Click the MFP Driver button.
Click the Display Readme button to 
show information on packages that are 
selected.
4Select Connected via the 
network and click the Next 
button.
To configure the appropriate settings in the print server, see...