Sharp Mx-b200 Service Manual

MX-B200  UNPACKING AND INSTALLATION  5 - 2
4. Unpacking
Be sure to hold the handles on both sides of the unit to unpack the
unit and carry it to the installation location.
5. Removing protective packing 
materials
1) Remove all pieces of tape shown in the illustration below.
Then open the SPF and remove protective materials. After
that, take out the bag containing the TD cartridge.
6. Developer unit installation
1) 2) 3) Open the side and front cabinets of the copier.
4) Remove the locking tape of the...

MX-B200  UNPACKING AND INSTALLATION  5 - 3 Note:When carrying Developer unit, do not tilt it extremely as
shown with the arrow in the figure below.
(Prevention of splash of developer)
13) Insert Developer unit carefully into the copier.
Note:Quick insertion may result in splash of developer. Be
sure to insert carefully.
14) Confirm that Developer unit is completely inserted to the bottom
of the machine, fix Developer unit and the machine with a
screw.
15) Completion of Developer unit installation
7....

MX-B200  UNPACKING AND INSTALLATION  5 - 4 3) Store the pressure plate lock which has been removed in step
2). To store the pressure plate lock, rotate the lock to fix it on
the relevant location.
4) Adjust the paper guides on the paper tray to the copy paper
width and length. Squeeze the lever of paper guide (A) and
slide the guide to match with the width of the paper. Move
paper guide (B) to the appropriate slot as marked on the tray.
5) Fan the paper and insert it into the tray. Make sure the edges
go...

MX-B200  UNPACKING AND INSTALLATION  5 - 5
B. Installing the software
1) The USB cable must not be connected to the machine. 
Make sure that the cable is not connected before proceeding.
If the cable is connected, a Plug and Play window will appear. 
If this happens, click the Cancel button to close the window
and disconnect the cable.
Note:The cable will be connected in step 13).
2) Insert the Software CD-ROM into your computers CD-ROM
drive.
3) Click the Start button, click Computer, and then...

MX-B200  UNPACKING AND INSTALLATION  5 - 6 12) When installing is finished, click the Close button.
Caution:
 If you are using Windows Vista/7 and a security warning win-
dow appears, be sure to click Install this driver software any-
way.
 If you are running Windows 2000/XP and a warning message
appears regarding the Windows logo test or digital signature,
be sure to click Continue Anyway or Yes.
A message will appear instructing you to connect the machine
to your computer. Click the OK button....

MX-B200  UNPACKING AND INSTALLATION  5 - 7 5) Select the printer name (configured as a shared printer).
 Select the printer name (configured as a shared printer on
a print server) from the list.
In Windows 2000/XP, you can also click the Add Network
Port button displayed below the list and select the printer
to be shared by browsing the network in the window that
appears.
 Click the Next button.
Follow the on-screen instructions.
Note:If the shared printer does not appear in the list, check the
settings...

MX-B200  UNPACKING AND INSTALLATION  5 - 8 7) Click the OK button.
Button Manager is now linked to the scan menu (1 through 6).
The scan settings for each of scan menu 1 through 6 can be
changed with the setting window of Button Manager.
For the factory default settings of the scan menu and the proce-
dures for configuring Button Manager settings, see Button
Manager settings.
(2) Windows 2000
1) Click the Start button, select Settings, and then click Con-
trol Panel.
2) Double-click the Scanners and...

MX-B200  UNPACKING AND INSTALLATION  5 - 9
12. Moving
Moving instructions
When moving the unit, follow the procedure below.
Note:When moving this unit, be sure to remove the TD cartridge in
advance.
1) Turn the power switch off and remove the power cord from the
outlet.
2) Open the side cover and front cover, in that order. Remove the
TD cartridge and close the front cover and side cover, in that
order.
To open and close the side cover and front cover, and to
remove the TD cartridge.
3) Raise the handle...

MX-B200  UNPACKING AND INSTALLATION  5 - 10 Align the edge of the mylar to the R part (the yellow line in the
diagram below) so that the hole of the metal plate is covered as
much as possible.
Attach along the edge of the projection (the yellow line in the
diagram below).
5) Attach the Optical right hole mylar B at the 2 positions shown in
the diagrams below which are at the top of the rear side of the
main unit.
Note:The holes should be covered with the mylar.
Attach along the edge of the cushion (the...

MX-B200  UNPACKING AND INSTALLATION  5 - 11 7) Attach the Scanner upper surface cushion on the top and the
rear side at the rear side of the main unit.
Align the cushion with the side of the raised part (the yellow line
in the diagram below).
Bend the part which is sticking out to the rear side of the scan-
ner and attach to the surface.
Press the cushion at the steps shown in the diagram so that
there will be no gap.
Press the cushion to make sure all the holes are covered.
8) Bend the edge of the...