Sharp Mx 4100n Owners Manual

14
SPECIFICATIONS
Saddle stitch finisher specifications*1
*1 Paper pass unit and stand/1x500 sheet paper drawer or stand/2x500 sheet paper drawer are required to connect the saddle stitch 
finisher to the machine.
*2 The maximum number of sheets that can be held varies depending on ambient conditions in the installation location, the type of 
paper, and the storage conditions of the paper.
*3 Up to 30 envelopes can be output.
*4 The height of the sheets must not exceed 6-57/64 (175 mm).
*5 The height of...

15
SPECIFICATIONS
Punch module specifications (for finisher)
Punch module specifications (for finisher (large stacker))
Punch module specifications (for saddle stitch finisher)
ModelMX-PNX1B
Hole punching3 holes or 2 holes
Allowed paper sizes for 
punching
3 holes:
11 x 17, 8-1/2 x 11, A3, A4
2 holes:
8-1/2 x 14, 8-1/2 x 13-1/2, 8-1/2 x 13-2/5, 8-1/2 x 13, 8-1/2 x 11R, 7-1/4 x 10-1/2
Punchable paper weights16 lbs. to 32 lbs. (55g/m2 to 128g/m2)
Power supplySupplied from finisher
Dimensions4-9/64 (W) x...

16
SPECIFICATIONS
Printer specifications
*1 When the PS3 expansion kit is installed and the machine is used as a PostScript printer.
*2 Barcode font kit is required.
*3 Supported operating systems are Windows 2000 / XP / Vista.
*4 When the XPS expansion kit is installed.
*5 To install the XPS expansion kit, an expansion memory board is required.
TypeBuilt-in
Continuous printing speedSame as continuous copying speed (When printing same document continuously on 8-1/2 x 11 
(A4) plain paper in non-offset...

17
SPECIFICATIONS
Network scanner / Internet Fax*1 specifications
*1 Internet fax expansion kit is required.
*2 Enhanced compression kit is required.
*3 Total number of all destinations (Scan to E-mail, Scan to FTP, Scan to Desktop, Scan to Network folder, Internet Fax, Fax, and 
Group)
Pull scan function (TWAIN) specifications
TypeBuilt-in
Scanning resolution (dpi)
100 x 100, 200 x 200, 300 x 300, 400 x 400, 600 x 600
Internet Fax: 200 x 100, 200 x 200, 200 x 400, 400 x 400, 600 x 600 (200 x 100, 200 x...

18
SPECIFICATIONS
Facsimile specifications
*1 Transmission speed is for an 8-1/2 x 11 or A4 document with approximately 700 characters at standard resolution (8 x 3.85 
lines/mm) sent in high speed mode (33.6 kbps (JBIG) or 14.4 kbps). This is only the time required to transmit the image 
information; the time required to send protocol signals is not included. Actual transmission times will vary depending on the 
contents of the document, the receiving machine type, and telephone line conditions.
*2...

19
Information that the administrator of the machine requires is printed on 
the back of this page.
(Separate this page from the manual and keep it in a safe place. In 
addition, fill in the name of the administrator and the administrators 
contact information in the left hand margin.)
Administrator           Name:                                            Contact at:
✂
mx5001_us_saf.fm  19 ページ  ２００８年９月２４日　水曜日　午前９時４５分 

20
TO THE ADMINISTRATOR OF THE 
MACHINE
(Separate this page from the manual and keep it in a safe place.)
Factory default passwords
When accessing the system settings, the administrator password is required to log in with administrator 
rights. The system settings can be configured in the Web pages as well as on the operation panel. To 
access the system settings using the Web pages, a password is also required.
Factory default administrator password
Store a new administrator password as soon as the...

21
TO THE ADMINISTRATOR OF THE MACHINE
For the users of the fax function
ABOUT THE TELEPHONE CONSUMER PROTECTION ACT OF 1991
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, 
including FAX machines, to send any message unless such message clearly contains in a margin at the top or bottom of each 
transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other...

22
TO THE ADMINISTRATOR OF THE MACHINE
FCC Notice to users:
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.
On this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX.
If requested, this number must be provided to the telephone company.
The REN is used to determine the number of devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in the devices not...

23
TO THE ADMINISTRATOR OF THE MACHINE
MX-4100N  Digital Full Color Multifunctional System
MX-4101N  Digital Full Color Multifunctional System 
MX-5001N  Digital Full Color Multifunctional System 
NOTICE for users in the USA
In the event that this authorized dealer does not honor its warranty commitments, 
please contact the General Manager, Business Products Group, Sharp Electronics 
Corporation, 1 Sharp Plaza, Mahwah, NJ 07495-1163, so that Sharp can try to help 
assure complete satisfaction of all the...