Sharp Lc32lb150u User Guide
Have a look at the manual Sharp Lc32lb150u User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Sharp manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
57 Sharp 32" LED TV www.sharpusa.com Setting the sleep timer You can specify the amount of time before your TV automatically turns off. To set the sleep timer: 1Press MENU. The on-screen menu opens. 2Press W or X to highlight SETUP, then press T or ENTER. The SETUP menu opens. 3Press S or T to highlight Time Setup, then press ENTER. The SETUP · TIME SETUP menu opens. 4Press S or T to highlight Sleep Timer, then press ENTER. A menu opens. 5Press S or T to selec t the amount of time before your TV turns off automatically. You can select Off, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 90 minutes, 120 minutes, 180 minutes, or 240 minutes. To turn off the sleep timer, select Off. 6Press MENU to return to the previous menu, or press EXIT to close the menu. Adjusting menu settings Selecting the menu language Your TV can display the on-screen menu in English, French, or Spanish. When you set your TV up for the first time, the language was selected. You can change the menu language to a different language. To select the menu language: 1Press MENU. The on-screen menu opens. 2Press W or X to highlight SETUP, then press T or ENTER. The SETUP menu opens. 3Press S or T to highlight Language, then press ENTER. A menu opens. 4Press S or T to highlight a language, then press ENTER. You can select English, Français, or Español. 5Press MENU to return to the previous menu, or press EXIT to close the menu. Turning Input Sensor on or off When the Input Sensor feature is turned on, your TV automatically detects which video jacks have devices connected to them. Your TV uses this information to determine what options you can select on the INPUT SOURCE list when you press INPUT. To turn Input Sensor on or off: 1Press MENU. The on-screen menu opens. 2Press W or X to highlight SETUP, then press T or ENTER. The SETUP menu opens. 3Press S or T to highlight Auto Input Sensing, then press ENTER. A menu opens. 4Press S or T to select On (turns on the input sensor) or Off (turns off the input sensor). 5Press MENU to return to the previous menu, or press EXIT to close the menu. Note You can also press SLEEP to set the sleep timer.
58 LC-32LB150U Sharp 32" LED TV www.sharpusa.com Labeling an input source You can add a label to an input source to make it easier to identify in the INPUT SOURCE list. To label an input source: 1Press MENU. The on-screen menu opens. 2Press W or X to highlight SETUP, then press T or ENTER. The SETUP menu opens. 3Press S or T to highlight Input Labels, then press ENTER. The SETUP · INPUT LABELS screen opens with the input source field highlighted. 4Press S or T to select the input source you want to label, then press X to move to the label field. 5Press S or T to select a character, then press Wor X to move to the previous or next character position. Repeat this step to enter additional characters. 6When you have completed the label, press ENTER to save your label and return to the previous menu. The next time you press INPUT, your label appears in the INPUT SOURCE list. 7Press EXIT to close the menu. Using CEC Control CEC Control lets you control HDMI CEC-compatible devices connected to the HDMI jacks on your TV using the remote control that came with your TV. To use CEC Control, you must set the CEC Control setting on the SETUP · CEC menu toOn. Turning CEC Control on or off To turn CEC Control on or off: 1Press MENU. The on-screen menu opens. 2Press W or X to highlight SETUP, then press T or ENTER. The SETUP menu opens. 3Press S or T to highlight CEC, then press ENTER. The SETUP · CEC menu opens. 4Press S or T to highlight CEC Control, then press ENTER. 5Press S or T to highlight On or Off, then press ENTER. 6Press MENU to return to the previous menu, or press EXIT to close the menu. Notes • HDMI cables must be used to connect HDMI CEC-compatible devices to your TV. • The connected device’s HDMI CEC feature must be turned on. • If you connect an HDMI device that is not HDMI CEC-compatible, all of the CEC features do not work. • Depending on the connected HDMI device, the CEC feature may not work.
59 Sharp 32" LED TV www.sharpusa.com Turning Device Auto Power Off on or off When CEC Control is set to On, Device Auto Power Off automatically turns off HDMI CEC devices when you turn off your T V. To turn Device Auto Power Off on or off: 1Press MENU. The on-screen menu opens. 2Press W or X to highlight SETUP, then press T or ENTER. The SETUP menu opens. 3Press S or T to highlight CEC, then press ENTER. The SETUP · CEC menu opens. 4Make sure that the CEC Control option is turned on. See “Turning CEC Control on or off” on page58. 5On the SETUP · CEC menu, press S or T to highlight Device Auto Power Off, then press ENTER. 6Press S or T to highlight On (turns off the connected devices when you turn off your TV ) or Off (does not turn off the connected devices when you turn off your T V ), then press ENTER. 7Press MENU to return to the previous menu, or press EXIT to close the menu. Turning TV Auto Power On on or off TV Auto Power On automatically turns on your TV when an HDMI CEC device is turned on, if the device has this feature. To turn TV Auto Power On on or off: 1Press MENU. The on-screen menu opens. 2Press W or X to highlight SETUP, then press T or ENTER. The SETUP menu opens. 3Press S or T to highlight CEC, then press ENTER. The SETUP · CEC menu opens. 4Make sure that the CEC Control option is turned on. See “Turning CEC Control on or off” on page58. 5On the SETUP · CEC menu, press S or T to highlight TV Auto Power On, then press ENTER. 6Press S or T to highlight On (turns on your T V when you turn on the connected device) or Off (does not turn on your TV when you turn on the connected device), then press ENTER. 7Press MENU to return to the previous menu, or press EXIT to close the menu.
60 LC-32LB150U Sharp 32" LED TV www.sharpusa.com Turning Audio Return Channel on or off When CEC Control is turned on and you have connected an audio receiver to your TV, turning on Audio Return Channel lets you use your TV’s remote control to control the volume on the audio receiver. To turn Audio Return Channel on or off: 1Press MENU. The on-screen menu opens. 2Press W or X to highlight SETUP, then press T or ENTER. The SETUP menu opens. 3Press S or T to highlight CEC, then press ENTER. The SETUP · CEC menu opens. 4Make sure that the CEC Control option is turned on. See “Turning CEC Control on or off” on page58. 5On the SETUP · CEC menu, press S or T to highlight Audio Return Channel, then press ENTER. 6Press S or T to highlight On (your TV’s remote control controls the connected audio receiver’s volume) or Off (your TV’s remote control does not control the connected audio receiver’s volume), then press ENTER. 7Press MENU to return to the previous menu, or press EXIT to close the menu. Displaying a list of CEC-compatible devices You can display a list of HDMI CEC devices that are connected to your T V. To display a list of CEC-compatible devices: 1Press MENU. The on-screen menu opens. 2Press W or X to highlight SETUP, then press T or ENTER. The SETUP menu opens. 3Press S or T to highlight CEC, then press ENTER. The SETUP · CEC menu opens. 4Make sure that the CEC Control option is turned on. See “Turning CEC Control on or off” on page58. 5On the SETUP · CEC menu, press S or T to highlight CEC Device Lists, then press ENTER. A list of the HDMI CEC-compatible devices you have connected appears. 6Press MENU to return to the previous menu, or press EXIT to close the menu.
61 Sharp 32" LED TV www.sharpusa.com Waking CEC-compatible devices When a connected CEC-compatible device is in turned off (standby mode), Connect wakes (turns on) the device. To wake CEC-compatible devices: 1Press INPUT, press S or T to highlight the CEC-compatible device you want to wake, then press ENTER. 2Press MENU. The on-screen menu opens. 3Press W or X to highlight SETUP, then press T or ENTER. The SETUP menu opens. 4Press S or T to highlight CEC, then press ENTER. The SETUP · CEC menu opens. 5Make sure that the CEC Control option is turned on. See “Turning CEC Control on or off” on page58. 6On the SETUP · CEC menu, press S or T to highlight Connect, then press ENTER to wake the HDMI CEC-compatible device connected to the HDMI input you selected. 7Press MENU to return to the previous menu, or press EXIT to close the menu. Opening a CEC-compatible device’s root menu You can open a CEC-compatible device’s root menu, then use your T V’s remote control to control the device, if the device has this feature. To open a CEC-compatible device’s root menu: 1Press INPUT, press S or T to highlight the CEC-compatible device you want to control, then press ENTER. 2Press MENU. The on-screen menu opens. 3Press W or X to highlight SETUP, then press T or ENTER. The SETUP menu opens. 4Press S or T to highlight CEC, then press ENTER. The SETUP · CEC menu opens. 5Make sure that the CEC Control option is turned on. See “Turning CEC Control on or off” on page58. 6On the SETUP · CEC menu, press S or T to highlight Root Menu, then press ENTER. The device’s root menu opens, and you can use your TV’s remote control to control the device. 7Press MENU to return to the previous menu, or press EXIT to close the menu.
62 LC-32LB150U Sharp 32" LED TV www.sharpusa.com Using an MHL-enabled device or Roku Streaming Stick You can connect your MHL-enabled device, such as a cell phone or Roku Streaming Stick™, and view your device’s screen on your TV. Using an MHL-enabled device To use an MHL-enabled device: 1Connect an MHL-enabled device to your TV. For connection instructions, see “Connecting an MHL-enabled device” on page22. A message tells you the device is connected. 2Press ENTER to access your MHL-enabled device. Your device’s menu opens. 3Use S T W X and ENTER to navigate on your device. To switch to an MHL-device that is already connected: 1Press INPUT, then press S or T to select HDMI 2 (MHL/ACC). OR Press MENU, then press W or X to highlight MHL/ACC. 2Press ENTER to access your MHL-enabled device. Your device’s menu opens. 3Use S T W X and ENTER to navigate on your device. Note Your device’s menu wi ll va r y dependin g on the device and the apps you have loaded on the device. Note The buttons you use to navigate on your device may vary depending on the device. Note Your device’s menu wi ll va r y dependin g on the device and the apps you have loaded on the device. Note The buttons you use to navigate on your device may vary depending on the device.
63 Sharp 32" LED TV www.sharpusa.com Using a Roku Streaming Stick To use a Roku Streaming Stick: 1Connect a Roku Streaming Stick™ to your TV. For connection instructions, see “Connecting an MHL-enabled device” on page22. A message tells you the stick is connected. 2Press ENTER to access your Roku Streaming Stick™. Your stick’s menu opens. 3Use S T W X and ENTER to navigate on your Roku Streaming Stick™.To switch to a Roku Streaming Stick that is already connected: 1Press INPUT, then press S or T to select HDMI 2 (Roku). OR Press MENU, then press W or X to highlight Streaming. 2Press ENTER to access your Roku Streaming Stick™. Your stick’s menu opens. 3Use S T W X and ENTER to navigate on your Roku Streaming Stick™. Note Your Roku Streaming Stick’s menu will vary depending on the content you have loaded on the device. Note Your Roku Streaming Stick’s menu will vary depending on the content you have loaded on the device.
64 LC-32LB150U Sharp 32" LED TV www.sharpusa.com Using a USB flash drive You can connect a USB flash drive to your TV to view compatible JPEG pictures. Switching to USB mode To switch to USB mode: 1Make sure that you have connected the USB flash drive to the USB port on your TV. 2If your TV is turned on when you connect the USB flash drive, press S or T to highlight Ye s in the message that appears, then press ENTER. The PHOTOS menu opens. OR If you connected the USB flash drive, then changed to a different video input source, press INPUT to open the INPUT SOURCE list, press S or T to highlight USB (Photos), then press ENTER. The PHOTOS menu opens. Browsing photos To browse photos: 1Switch to USB mode. See “Switching to USB mode” on page64. The PHOTOS menu opens.2Press S or T to highlight Browse Photos, then press ENTER. The screen displays folder names and photo files stored on the USB flash drive in a thumbnail index with the first photo or folder highlighted. A control bar appears at the bottom of the screen. 3To navigate the thumbnail index screen, press: • S T W or X to browse through the files and folders. •ENTER to view a highlighted photo full-screen or open a highlighted folder. •MENU to open the PHOTOS menu. •FAV O R I T E to add or remove a photo from the favorite photo list. A heart appears on a photo that has been added to the favorite photo list. When a photo is displayed full-screen, a control bar appears at the bottom of the photo. The file name, picture resolution, size, and date are displayed on the bottom of the control bar. If you do not press a button within 10 seconds, the control bar closes. Press INFO* to open the control bar again. 4To navigate on the photo screen, press: • W to go to the previous photo. • X to go to the next photo. •ENTER to rotate the photo clockwise. •VIEW MODE one or more times to enlarge the image by ×2 or ×4 or to select Fill (to fill the screen). You can press S T W or X to pan the photo. •EXIT to return to the thumbnail index. •MENU to return to the PHOTOS menu. Notes • Never remove the USB flash drive or turn off your TV while viewing JPEG pictures. • The JPEG picture viewer only supports JPEG format images (with “.jpg” file extensions) and not all JPEG files are compatible with your TV. Note To exit USB mode, press INPUT to open the INPUT SOURCE list, then select another input source. Note Photos are shown in the order they appear on the USB flash drive. They may not be listed in file name order.
65 Sharp 32" LED TV www.sharpusa.com Viewing favorite photos After you create your favorite photo list, you can browse among your favorite photos quickly. To view favorite photos: 1Switch to USB mode. See “Switching to USB mode” on page64. The PHOTOS menu opens. 2Press S or T to highlight Favorite Photos, then press ENTER. A thumbnail index of your favorite photos opens with a control bar at the bottom of the screen. A heart appears on a favorite photo. You select photos and navigate on the photo screen in the same way you do when you are browsing through photos. For more information, see “Browsing photos” on page64. Viewing photos in a slideshow You can view your photos in a slideshow. To view photos in a slideshow: 1Switch to USB mode. See “Switching to USB mode” on page64. The PHOTOS menu opens. 2If the photos you want to view are in a folder on the USB flash drive, select the folder. For information about selecting a folder, see “Browsing photos” on page64 or “Viewing favorite photos” on page65. 3Press MENU. The PHOTOS menu opens again. 4Press S or T to highlight View Slideshow, then press ENTER. A slideshow starts with the first photo in the current folder. 5To control the slideshow, press: •ENTER to pause or start the slideshow. •EXIT to exit the slideshow and go to the PHOTOS menu. •MENU to go to the PHOTOS menu.Note Photos are shown in the order they appear on the USB flash drive. They may not be listed in file name order.
66 LC-32LB150U Sharp 32" LED TV www.sharpusa.com Customizing slideshow settings You can customize the slideshow settings, including Slideshow Repeat, Slideshow Shuffle, Slideshow Interval, and Slideshow Effect. To customize slideshow settings: 1Switch to USB mode. See “Switching to USB mode” on page64. The PHOTOS menu opens. 2Press S or T to highlight Photo Settings, then press ENTER. The PHOTOS · PHOTOS SETTINGS menu opens. 3Press S or T to highlight an option, then press ENTER. You can select: •Slideshow Repeat—Repeats the slideshow when it reaches the end. You can select On or Off. •Slideshow Shuffle—Displays the slideshow photos in random order. You can select On or Off. •Slideshow Interval—Sets the amount of time a photo is displayed before the slideshow moves to the next photo. You can select 4sec, 6sec, or 8sec. •Slideshow Effect—Selects the way photos transition when moving to the next file in the slideshow. You can select: •None—No transition effect. •Fad e to Blac k—Fades the screen to black between photos. •Ver tic al Wip e—Wipes the screen from top to bottom between photos. •Horizontal Wipe—Wipes the screen from left to right between photos. •Random—Randomly selects a transition effect. 4Press S or T to select a setting, then press ENTER. 5Press EXIT to close the menu. Maintaining • Do not use your TV in areas that are too hot or too cold, because the cabinet may warp or the screen may malfunction. Your TV works best in temperatures that are comfortable to you. • Storage temperatures are 32° to 122°F (0° to 50°C). • Working temperatures are 41° to 104°F (5° to 40°C). • Do not place your TV in direct sunlight or near a heat source. Cleaning the TV cabinet Clean the cabinet with a soft, lint-free cloth. If the cabinet is especially dirty, moisten a soft, lint-free cloth in a weak detergent solution, squeeze the excess moisture from the cloth, then wipe the cabinet with the cloth. Use a clean cloth to dry the cabinet. Cleaning the TV screen Clean the screen with a soft, lint-free cloth.