Sharp Lc 46d65e Operation Manual

							
Basic adjustment
Child Lock
Setup
Allows you to use a PIN to protect certain settings 
from being accidentally changed.
Change PIN
Register a four-digit password number to use the 
“Child Lock” function.Enter the four-digit number as a PIN using  0–9 
numeric buttons.
Enter the same four-digit number as in step 1 to confirm.“The system PIN has been changed successfully” displays.
NOTETo view a locked channel, you must enter the PIN (See pages 27 
and 28 for locking channels from viewing in DTV and ATV mode). 
When you select a locked channel, a PIN prompt message pops 
up. Press  6 to display the PIN input window.
Cancel PIN
Allows you to reset your PIN.
NOTE
As a precautionary measure, make a note of your PIN on the 
back of this operation manual, cut it out and keep it in a safe 
place that children cannot reach.
Parental rating
This function allows DTV services to be restricted. 
It prevents children from watching violent or sexual 
scenes that may be harmful.
NOTE
“Universal viewing” and “Parental approval pref.” are ratings used 
exclusively in France.
Refer to page 44 for details about ratings.
1
2
•
•
•
•
•
Language
Setup
You can select a OSD language from the “Setup” 
menu. Select from among 23 languages (Czech, 
Danish, Dutch, English, Estonian, Finnish, French, 
German, Greek, Hungarian, Italian, Latvian, Lithuanian, 
Norwegian, Polish, Portuguese, Russian, Slovak, 
Slovene, Spanish, Swedish, Turkish, Ukrainian).
Subtitle
Digital Setup
Set up to two preferred subtitle languages (including 
subtitles for the hearing impaired) to display if subtitles 
are available.
NOTE
Subtitles will not be displayed when the service does not contain 
subtitle information.
•
Digital Audio Language
Option
Set up to three preferred multi audio languages to 
display if the audio languages are available.
Switching the multi audio languages
Each time you press 
2 on the remote control unit, 
the audio language switches.
E
Key Lock
Option
This function allows you to lock the buttons on the TV 
or remote control unit in order to prohibit children from 
changing the channel or volume.
NOTE
You cannot set both “RC Control Lock” and “Button Control Lock” 
at the same time.
Cancelling the lock
Press the  MENU button on the TV and set to “Off” to 
cancel the “RC Control Lock”. Press the  MENU button 
on the remote control unit and set to “Off” to cancel 
the “Button Control Lock”.
Refer to page 23 for menu operation using the  MENU button on 
the TV.
•
E
•
1st Language  E 2nd Language
For hearing impaired
EE
Switching subtitle languages
Each time you press 
[ on the remote control unit, the 
subtitle switches.
E
Password/Parental lock settings
Off:  Unlocks the buttons.
RC Control Lock:  Locks all buttons on the remote control unit.
Button Control Lock:  Locks the buttons on the TV except the 
power switch.
Language Settings (language, 
subtitle, multi audio)
1st Language
Off
2nd Language
••••••
1st Language
1st Language
(For hearing impaired)
Set “For hearing impaired” to “Yes”
Subtitles for the hearing impaired have priority over 
each of the subtitle language settings (Example: “1st 
Language”, “2nd Language”, etc.).
EXAMPLE
E
 29
Item
Selectable items
 
						

							
Useful Viewing functions
WSS
Setup
WSS signal 4:3 screen
4:3 Mode
Setup
The “WSS” signal has 4:3 auto-switching that allows 
you to select between “Normal” and “Panorama”.4:3 mode “Panorama”
4:3 mode “Normal”
The “WSS” allows the TV to switch automatically 
among the different picture size.
NOTE
Use “WIDE MODE” if an image does not switch to the 
appropriate picture size. When the broadcast signal 
contains no “WSS” information, the function will not work 
even if enabled.
Selecting the WSS (Wide Screen 
Signalling) picture size manually
•
Selecting the picture size
Selecting the WSS (Wide Screen 
Signalling) picture size automatically
Normal:  Normal range keeping 4:3 or 16:9 aspect ratio.
Panorama:  Wide image without side bars.
Selecting the picture size manually
You can select the picture size. Selectable picture size 
varies with the type of signal received.
Normal: Keeps the original aspect ratio in a full screen 
display.
Zoom 14:9:  For 14:9 letterbox pictures. A thin side bar 
appears on each side, and you may also see bars on 
the top and bottom with some programmes.
Panorama:  In this mode, the picture is stretched toward 
each side of the screen. The picture may appear similar 
to “Full” depending on broadcast signals.
Full:  For 16:9 squeeze pictures.
Cinema 16:9:  For 16:9 letterbox pictures. Bars may 
appear on the top and bottom with some programmes.
Cinema 14:9:  For 14:9 letterbox pictures. Bars may 
appear on the top and bottom with some programmes.
Full:  Displays with an Overscan image. Crops all sides of 
screen.
Underscan:  Displays with an Underscan image only 
when receiving a 720p signal. Displays with the High-
Definition image adjusted optimally. Noise may appear 
on the edge of the screen with some programmes.
Dot by Dot:  Displays an image with the same number 
of pixels on the screen when receiving 1080i/1080p 
signals only.
NOTESome items do not appear depending on the type of 
received signal.
Press  f.The “WIDE MODE” menu displays.
The menu lists the “WIDE MODE” options selectable 
for the type of video signal currently received.
Press  f or  a/b  while the “WIDE MODE” 
menu displays on the screen.
As you toggle the options, each is immediately 
reflected on the screen. There is no need to press  OK.
Basically, if you set “WSS” to “On” in the “Setup” 
menu, the optimum “WIDE MODE” is automatically 
chosen for every broadcast, VCR or DVD player/
recorder.
NOTE
Even if you select your desired “WIDE MODE” manually, 
the TV may automatically switch to the optimum “WIDE 
MODE” depending on the signal received when “WSS” is 
set to “On”.
•
1•
•
2
•
•
 30
Item
Item (for SD [Standard-Definition] signals)
Item (for HD [High-Definition] signals)
 
						

							
You can use this menu to set the appropriate picture 
size for viewing a 16:9 format TV programme on a 4:3 
TV.
REC Picture Size
Digital Setup
Setting to “4:3 TV” Setting to “16:9 TV”
This function allows you to automatically change to the 
appropriate picture size when viewing an HDMI signal 
using the HDMI1, 2 and 3 terminals.
Other picture and audio settings
Adjusting image position
HDMI Auto View
Setup
NOTEThis function must be set before recording.
Selecting the HDMI picture size 
automatically
•
Position
Setup
For adjusting a picture’s horizontal and vertical 
position.
NOTE
Adjustments are stored separately for each input source.
Depending on the input signal type or “WIDE MODE” 
setting, a position setting may not be available.
This function is not available for DTV broadcasts with 
MHEG signals.
•
•
•
Automatic volume adjustment
Auto Volume
Option
Different sound sources sometimes do not have the 
same volume level, such as a programme and its 
commercial breaks. The Automatic Volume Control 
(Auto Volume) reduces this problem by equalizing 
levels.
Emphasising dialogue
Clear Voice
Option
This function emphasises speech against background 
noise for greater clarity. It is not recommended for 
music sources.
Outputting audio only
Audio Only
Option
When listening to music from a music programme, you 
can set the TV off and enjoy audio only.
Useful Viewing functions
Selecting the recording picture 
size manually
H-Pos.:
 Centres the image by moving it to the left or 
right.
V-Pos.:  Centres the image by moving it up or down.
Off: Both screen images and audio are output.
On:  Audio is output without a screen image.
 31
Item
Item
 
						

							
Useful Viewing functions
Time Display
Option
Time Format
You can select the time format (either “24HR” or “AM/
PM”) for the clock time.
Game Play Time
Option
This function allows you to display the elapsed time on 
the screen when “AV MODE” is set to “GAME”.
Programme Title Display
Option
This function allows you to display programme 
information such as the title and airtime by tuning a 
channel.
NOTE
This function is available only when the DTV mode is 
selected.
•
Time Display
This function allows you to display the clock time in the 
lower-right corner of the screen.
Four digit numbers (e.g. 0001) are displayed after 
selecting the five Nordic countries in the country 
setting.
Time display in channel information
You can display the time information included in DTV 
and teletext broadcasts.
NOTE
Skip step 1 if receiving DTV broadcasts.
Select a TV channel (The time information is 
automatically captured).
Press  p. The channel display will appear on 
the TV.
Press  p again within the several seconds 
that the channel display is on the screen. Time 
information will be shown in the lower-right 
corner of the screen for several seconds.
Even when you change the TV channel, you can 
display the time information with steps 2 and 3 
above.
NOTE
If acquired successfully, the time information will appear in 
the upper-right corner of the screen by pressing  MENU.
*
E
•
1
2
3
4
•
Subtitle ENG 1/3 : 
New Information 
Audio (ENG)  STEREO 
: 
Video 1080i  : 
DTV 001 
BBC2 
Subtitle Teletext Off :
New Information 
PA L I
NICAM STEREO
AT V01
BBC1
DTV ModeATV Mode
Display Settings
Channel display
You can display the channel information by pressing 
p  on the remote control unit.
Time and Title display
On:  Displays the clock time.
On (half-hourly):  Displays the clock time in 30-minute 
increments.
Off:  Hides the clock time.
On: Under connecting a game console to the TV, the 
elapsed time is displayed in 30-minute increments after 
you start playing a game.
Off:  Hides the time.
NOTEThis menu is not selectable if the input source is “TV” or 
“USB”.
•
 32
Item
Item
 
						

							
Other useful features
Input Select
Option
For setting the signal type of external equipment.
NOTE
If no (colour) image displays, try changing to another 
signal type.
Check the operation manual of the external equipment for 
the signal type.
•
•
Input Label
Setup
You can label each input source with a custom 
description.
Press  b to select the desired input source.
Go to “MENU” > “Setup” > “Input Label”.
Press  a/b /c /d  to select each character of the 
new name for the input source, and then press 
OK .
A 
BACK  CLEAR 
END 
K 
U  B 
L 
V  C 
M 
W  D 
DVD 
N X  E 
O  Y  F 
P  Z  G 
Q  +  H 
R  – _  I 
S  .  J 
T 
0 1 2 3 4 5 6 7 8 9 
Repeat until the label is fully spelt out.
NOTE
The label can be six characters or less.
When you want to set an input source label of less than six 
characters, select “END” to set the name.
INPUT SOURCE  TV  EXT1
EXT2
DVD
EXT4
HDMI1
EXT6
NOTEYou cannot change labels if the input source is “TV” or 
“USB”.
1
2
3
4
•
•
•
Input Skip
Setup
This setting allows you to skip the SCART, HDMI or 
RGB input on the Input Source Selection operation.
EXT1 (SCART)
EXT2 (SCART)
EXT4 (RGB)
HDMI1
HDMI2
HDMI3 Y 
es  No 
Colour system settings
You can change the colour system to one that is 
compatible with the image on the screen.
NOTE
The factory preset value is “Auto”.
If “Auto” is selected, the colour system for each channel 
is automatically set. If an image does not display clearly, 
select another colour system (e.g. “PAL”, “SECAM”).
Additional features
•
•
Quick Start
Setup
You can reduce the TV’s start-up time after turning on 
the power with the remote control unit.
Colour System
Option
Setting when using external 
devices
Input source settings
EXT1: 
Y/C, CVBS, RGB
EXT2:  Y/C, CVBS, RGB
Skipping specified inputs
On: The TV quickly starts up from standby. 30 W or more 
of power consumption is required during standby.
Off:  Power consumption is small during standby.
 33
Item
Item
 
						

							
Other useful features
Connecting a USB device
Connect an USB device to the TV as shown below.
Depending on the USB device, the TV may not be able to 
recognise the contained data.
Use only alphanumeric characters for naming files.
File names over 80 characters (may vary depending on 
character set) may not be displayed.
Do not disconnect a USB device or memory card from the 
TV while transferring files, using the slide show function, 
when a screen is switching to another or before you exit 
“USB” from the “INPUT SOURCE” menu.
Do not connect and disconnect a USB device from the TV 
repeatedly.
USB Photo Viewer/Music Player
In this mode, you can enjoy viewing 
photos and listening to music from 
external USB devices. Select “USB” 
from the “INPUT SOURCE” menu to 
enter this mode.
NOTE
You cannot enter this mode when there 
is no USB device connected to the TV.
This mode is not available during DTV 
timer recording.
“WIDE MODE” is fixed during this 
mode.
“USER (USB)” is the default value for the “AV MODE” 
setting. Each time you press AV MODE, the mode changes 
between “USER (USB)”, “DYNAMIC (Fixed)”, “DYNAMIC”\
 
and “STANDARD”.
Selecting modes and devices
Select Mode 
Select USB drive 
Photo Mode  Music Mode 
Drive 1 
Drive 2 Drive 3 Drive 4 Drive 5 Drive 6 Drive 7 Drive 8 Drive 9 Drive 10 Drive 11 Drive 12 Drive 13 Drive 14 Drive 15 Drive 16 
Press  c/d  to select between “Photo Mode” 
and “Music Mode”, and then press  OK.
Press  a/b /c /d  to select the drive where you 
want to find your files, and then press  OK.
NOTE
You do not need to select the drive in step 2 when there is 
only one drive in the connected USB device.
16 is the maximum number of drives that can be displayed.
•
•
•
•
•
•
•
•
•
1
2
•
•
Photo Mode
Viewing thumbnails
2007:10:18 13:30:00
600KB Demo/Demo 01
Demo.jpg
1600X1200
Sample
Buttons for thumbnail operations
Buttons Description
OK When selecting the folder icon with the 
6 mark: Go back to the parent directory.
When selecting a folder icon: Enter this 
directory.
When selecting a photo thumbnail: 
Display the photo in full screen.
a /b /c /d  
(Cursor) Select a desired item.
6 Return to the top menu.
R button Go back to the previous page.
G button Go to the next page.
Y button Select BGM for the slide show.
B button Start the slide show. 
NOTEWhen there are invalid photo files, the  g mark will be 
displayed for the file.
You can see the file name, shooting date, file size and 
pixel size of the selected photo in the lower-left corner of 
the screen (shooting date is only available in the EXIF file 
format).
Viewing photos in full screen
Buttons for full screen display operation
Buttons Description
c /d  (Cursor) Go to the previous/next photo in the 
same directory.
6 Return to the thumbnail selection screen.
R button Rotate the photo by 90 degrees to the 
left.
G button Rotate the photo by 90 degrees to the 
right.
B button Reveal/hide the Guide Display.
NOTERotating photos only applies to the temporarily selected 
item and this setting is not saved.
•
•
•
 34
INPUT SOURCE
TV EXT1
EXT2
EXT3
EXT4
HDMI1
HDMI2
HDMI3
EXT8
USB
 
						

							
Slide showSelecting the BGM
File name
SONGS
Demo/Demo1
CLASSIC
SONG_01.MP3
SONG_02.MP3
SONG_03.MP3
SONG_04.MP3
SONG_05.MP3
SONG_06.MP3
SONG_07.MP3
SONG_08.MP3
SONG_09.MP3 Time
3:05
3:15
3:02
6:05
4:52
0:00
3:13
3:23
3:33
Playing: SONG_02.MP3
Slide Show BGM:SONG_03.MP3 1:00 / 3:15
Buttons for slide show BGM select 
operation
Buttons Description
OK When selecting the folder icon with the 
6 mark: Go back to the parent directory.
When selecting a folder icon: Enter this 
directory.
When selecting a music file: Play music.
a /b  (Cursor) Select a desired item.
c  (Cursor) Page up.
d  (Cursor) Page down.
6 Return to the thumbnail selection screen.
R button Stop music.
G button Play/Pause music.
Y button Set the selected music to the slide show 
BGM.
B button Reset the slide show BGM.
NOTEOnly one song can be set to the slide show BGM.
Slide show BGM will be reset in the cases below.
Go back to the top menu.
Change the “INPUT SOURCE”.
When there are invalid music files, the  g mark will be 
displayed for the file.
The displayed play time may differ slightly from the actual 
play time depending on the files.
Slide show
Buttons for slide show operation
Buttons Description
6 Return to the thumbnail selection screen.
B button Reveal/hide the Guide Display.
NOTEThe selected BGM is played repeatedly.
The slide show continues until you press  6.
The slide show speed is approximately 10 seconds per 
photo.
E
•
•
•
•
•
•
E
•
•
•
Music Mode
File name
ROOT
Demo/Demo1
CLASSIC
SONG_01.MP3
SONG_02.MP3
SONG_03.MP3
SONG_04.MP3
SONG_05.MP3
SONG_06.MP3
SONG_07.MP3
SONG_08.MP3
SONG_09.MP3 Time
3:05
3:15
3:02
6:05
4:52
0:00
3:13
3:23
3:33
Playing: SONG_02.MP3 1:00 / 3:15
Buttons for Music Mode
Buttons Description
OK When selecting the folder icon with the 
6 mark: Go back to the parent directory.
When selecting a folder icon: Enter this 
directory.
When selecting a music file: Play music.
a /b  (Cursor) Select the desired item.
c  (Cursor) Page up.
d  (Cursor) Page down.
6 Return to the top menu.
R button Stop music.
G button Play/Pause music.
B button Turn off the screen image for audio only 
output.
NOTEWhen there are invalid music files, the  g mark will be 
displayed for the file.
The displayed play time may differ slightly from the actual 
play time depending on the files.
USB device compatibility
USB device USB Memory, USB card reader (Mass 
Storage class)
File system FAT/FAT32
Photo file 
format JPEG (.jpg) (DCF2.0 compliant)
Music file 
format MP3 (.mp3)
Bitrate: 32k, 40k, 48k, 56k, 64k, 80k, 
96k, 112k, 128k, 160k, 192k, 224k, 
256k, 320kbps
Sampling frequency: 32k, 44.1k, 48kHz
NOTEProgressive format jpeg files are not supported.
Music files in USB 1.1 devices may not be played properly.
Operation using USB hubs is not guaranteed.
•
•
•
•
•
Other useful features
 35
 
						

							
Connecting a PC
When using the EXT4 terminal, you must select “EXT4 (RGB)” in th\
e 
“PC Audio Select” menu (Refer to the right column for details).
NOTEThe PC input terminals are DDC1/2B-compatible.
Refer to page 39 for a list of PC signals compatible with the TV.
A Macintosh adaptor may be required for use with some Macintosh 
computers.
When connecting to a PC, the input signal type is automatically 
detected except 1,024 g 768 and 1,360  g 768 signals.
*
•
•
•
•
Analogue Connection
NOTERefer to page 30 for AV signals (See below).
HDMI: 480i/480p/576i/576p/720p/1080i/1080p
ANALOGUE RGB: 576p/720p (50Hz)/1080i
The ANALOGUE RGB terminal (PC) (EXT4) is not 
compatible with 480i/576i/1080p signals.
•
•
Connecting a PC
HDMI Connection
Displaying a PC image on the 
screen
Selecting the picture size
You can select the picture size.
Press  f.
The “WIDE MODE” menu displays.
Press  f or  a/b  to select a desired item on the 
menu.
NOTE
Connect the PC before making adjustments.
Selectable picture size may vary with input signal type.
EXAMPLE
1•
2
•
•
Full:  An image fully fills the screen.
Cinema:  For letterbox pictures. Bars may appear on the 
top and bottom with some programmes.
Normal:  Keeps the original aspect ratio in a full screen 
display.
Dot by Dot:  Displays an image with the same number of 
pixels on the screen.
When using the HDMI2 terminal, you must select the proper item in 
the “PC Audio Select” menu depending on the type of HDMI cable 
connected (Refer to the right column for details).
*
Setting audio input
PC Audio Select
Option
When using the EXT4 terminal or HDMI2 terminal, you must 
select which terminal uses the AUDIO (R/L) jack for analogue 
audio input.
HDMI2:
 When connecting devices (including a PC) with DVI/HDMI 
cable to the HDMI2 terminal and inputting analogue audio 
signals from the AUDIO (R/L) jack.
EXT4 (RGB):  When connecting a PC to the EXT4 terminal, and 
inputting analogue audio signals from the AUDIO (R/L) jack.
Item
NOTE
You must set this to “EXT4 (RGB)” when connecting 
devices (including a PC) with an HDMI-certified cable to the 
HDMI2 terminal. If “HDMI2” is set, there will be no sound 
output.
•
 36
ø 3.5 mm stereo minijack cable HDMI1, 2* or 3
HDMI-certified cable
PC
HDMI2*
DVI/HDMI cable
RGB cable
ø 3.5 mm stereo minijack cable
ø 3.5 mm stereo minijack cable
DVI/RGB conversion cable
Normal Full
Item
PC
EXT4*
PC
EXT4*
PC
 
						

							
Connecting a PC
Press a/b  to select the specific adjustment 
item.
Press  c/d  to adjust the item to the desired 
position.1
2
Reset 
H-Pos. [ 90]  ab
ab
ab
ab
V-Pos. 
Clock 
Phase [ 39] 
[ 90] 
[ 20] 
NOTEYou can only select the “Input Signal” on the “Setup” menu 
when receiving one of the two input signals listed above.
•
1024 x 768
1360 x 768
(Example)
Fine Sync.
Setup
NOTEFor resetting all adjustment items to the factory preset 
values, press 
a/b  to select “Reset”, and then press  OK.
“Clock” and “Phase” in the “Fine Sync.” menu can be 
adjusted only when inputting analogue signals through the 
EXT4 terminal.
Selecting input resolution
Some input signals may have to be registered 
manually to display properly.
The pairs of input signals (resolutions) in the list 
below are not distinguishable when received. In such 
cases, you have to set the correct signal manually. 
After setting once, it will display when the same 
signal (resolution) is input again.
•
•
•
•
Input Signal
Setup
30% 
NOTEWhen “Auto Sync.” is successful, “Auto Sync completed 
successfully” displays. If not, “Auto Sync.” failed.
“Auto Sync.” may fail even if “Auto Sync completed 
successfully” displays.
“Auto Sync.” may fail if the PC image has low resolution, 
has unclear (black) edges, or is moved while executing 
“Auto Sync.”.
Be sure to connect the PC to the TV and switch it on 
before starting “Auto Sync.”.
“Auto Sync.” can be executed only when inputting 
analogue signals through the EXT4 terminal.
Adjusting the PC image manually
Ordinarily you can easily adjust the picture as 
necessary to change image position using “Auto 
Sync.”. In some cases, however, manual adjustment is 
needed to optimise the image.
•
•
•
•
•
Auto Sync.
Setup
Adjusting the PC image 
automatically
This function enables the screen to be automatically 
adjusted to its best possible condition when the 
analogue terminals of the TV and PC are connected 
with a commercially available DVI/RGB conversion 
cable, etc.
H-Pos.:  Centres the image by moving it to the left or 
right.
V-Pos.:  Centres the image by moving it up or down.
Clock:  Adjusts when the image flickers with vertical 
stripes.
Phase:  Adjusts when characters have low contrast or 
when the image flickers.
 37
Item
 
						

							
Connecting a PC
C1 C2 C3 C4 P1  P2  P3  P4
Communication conditionsSet the RS-232C communications settings on the PC 
to match the TV’s communications conditions. The 
TV’s communications settings are as follows:
Baud rate:9,600 bps
Data length:  8 bits
Parity bit: None
Stop bit: 1 bit 
Flow control: None
Communication procedureSend the control commands from the PC via the RS-
232C connector.
The TV operates according to the received command 
and sends a response message to the PC.
Do not send multiple commands at the same time. 
Wait until the PC receives the OK response before 
sending the next command.
Make sure to send “A” with the carriage return and 
confirm that “ERR” returns before operating.
Command format
0055 100
–30 0009
0
???? ?
OK
ERR
Response code format
RS-232C port specifications
PC Control of the TVWhen a programme is set, the TV can be controlled 
from the PC using the RS-232C terminal. The input 
signal (PC/video) can be selected, the volume 
can be adjusted and various other adjustments 
and settings can be made, enabling automatic 
programmed playing.
Use an RS-232C serial control cable (cross type) 
(commercially available) for the connections.
NOTE
This operation system should be used by a person who is 
accustomed to using PCs.
•
•
•
ParameterInput the parameter values, aligning left, and fill with 
blank(s) for the remainder (Be sure that four values are 
input for the parameter).
When the input parameter is not within an adjustable 
range, “ERR” returns (Refer to “Response code 
format”).
When “?” is input for some commands, the present 
setting value responds.
After sending the return code (0DH), make sure to 
send the line feed (0AH) as well.
Command four digits: Command. The text of four 
characters.
Parameter four digits: Parameter 0–9, blank, ?, minus
 38
RS-232C serial control cable 
(cross type)
Eight ASCII codes  eCR
Command 
four digits Parameter 
four digitsReturn code Normal response
Problem response (communication error or incorrect 
command)
Return code (0DH)
Return code (0DH)