Sharp Lc 46d65e Operation Manual

							LC-46D65E
LC-46DH65E
LC-46DH65S
LCD COLOUR TELEVISION
LCD-FARBFERNSEHGERÄT
TÉLÉVISEUR COULEUR À ÉCRAN
CRISTAUX LIQUIDES (LCD)
TELEVISORE A COLORI LCD
LCD-KLEURENTELEVISIE
TELEVISIÓN EN COLOR LCD
TELEVISOR DE CRISTAL LÍQUIDO
Printed in Spain
Gedruckt in Spanien
Imprimé en Espagne
Stampato in Spagna
Gedrukt in Spanje
Impreso en España
Impresso no Espanha
LC-46D65E/LC-52D65E
LC-46DH65E/LC-52DH65E
LC-46DH65S/LC-52DH65S
OPERATION MANUAL / BEDIENUNGSANLEITUNG / MODE D’EMPLOI / MANUALE DI ISTRUZIONI / GEBRUIKSAANWIJZING / MANUAL DE MANEJO / 
MANUAL DE OPERAÇÃO
D808WJZZ1
OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE MANEJO
MANUAL DE OPERAÇÃO
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
ESPAÑOL
TINS-D808WJZZ08P09-SP-NG
PIN
SHARP ELECTRÓNICA ESPAÑA S.A.
Polígono Industrial Can Sant Joan
Calle Sena s/n
08174 SANT CUGAT DEL VALLÉS
BARCELONA (ESPAÑA)
SHARP CORPORATION
LC-52D65E
LC-52DH65E
LC-52DH65S
PORTUGUÊS
: LC-46D65E/LC-52D65E
: LC-46DH65E/LC-52DH65E
: LC-46DH65S/LC-52DH65S
 
						

							 
(1113.0 )/ [1252.0]
 
(1113,0 )/ [1252,0]
 
(1023.4 )/ [1157.0]
 
(1023,4 )/ [1157,0]
[54.5]
[54,5 ] (52.0)
(52,0)
[145.0]
[145,0 ] (174.3)
(174,3)
[111.9]
[111,9] (106.6)
(106,6)
[95.6]
[95,6 ] (101.4)
(101,4)
 
(704.0 )/ [796.0]
 
(704,0 )/ [796,0]  
(756.0 )/ [851.0]
 
(756,0 )/ [851,0]
400.0
400,0
400.0
400,0
295.0
295,0
550.0
550,0
 
(575.6 )/ [651.0]
 
(575,6 )/ [651,0]
 
(429.0 )/ [476.0]
 
(429,0 )/ [476,0]
SPECIAL NOTE FOR USERS IN THE U.K.The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the 
fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked  or 
 and of the same rating as above, 
which is also indicated on the pin face of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains 
plug and fit an appropriate type.
DANGER:The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a 
safe manner. 
Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric 
shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:
IMPORTANT:The wires in the mains lead are coloured in accordance with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this product may not correspond with the coloured markings 
identifying the terminals in your plug, proceed as follows:
•  The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black.
•  The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red.
Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug.
Before replacing the plug cover make sure that:
•  If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug.
•  The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.(    ) : LC-46D65E/46DH65E/46DH65S
[    ] : LC-52D65E/52DH65E/52DH65S
  
 : LC-46D65E/46DH65E/46DH65S
    LC-52D65E/52DH65E/52DH65S
 
						

							
OPERATION MANUAL
Contents ...............................................................\
.............. 1
Introduction ........................................................................\
 2
Dear SHARP customer ................................................. 2
Important Safety Precautions ........................................ 2
Trademarks ..............................................................\
..... 2
Remote control unit....................................................... 3
TV (Front view) .............................................................. 4
TV (Rear view) ............................................................... 4
Preparation ..............................................................\
.......... 5 Supplied accessories .................................................... 5
Attaching the stand unit ................................................ 5
Inserting the batteries  .................................................... 6
Using the remote control unit ........................................ 6 Cautions regarding the remote control unit  ............... 6
Quick guide ........................................................................\
 7 Initial installation overview  .............................................. 7
Before turning on the power.......................................... 8 Bundling the cables ................................................. 8
Initial auto installation .................................................... 9 Checking signal strength and channel strength ........ 9
Watching TV ..................................................................... 10 Daily operation ............................................................ 10Switching on/off ..................................................... 10
Switching between analogue and digital broadcasts ................................................ 10
Changing channels ................................................ 10
Selecting an external video source ......................... 10
Selecting a sound mode ........................................ 10
EPG (Electronic Programme Guide)  ............................. 11
EPG Overview  ............................................................. 11
Useful settings for using EPG ...................................... 11
Selecting a programme using EPG.............................. 12
Timer recording using EPG ......................................... 13
Cancelling the timer recording ..................................... 13
Teletext ................................................................\
....... 14
Using the MHEG-5 application (UK only) ..................... 14
Connecting external devices .......................................... 15 Introduction to connections  ......................................... 15
HDMI connection ................................................... 16
Component connection ......................................... 16
VIDEO connection ................................................. 16
SCART connection ................................................ 17
Controlling devices with SCART using AV Link ....... 17
Speaker/amplifier connection ................................. 18
Inserting a CA Card  ..................................................... 19
AQUOS LINK .................................................................... 20 Controlling HDMI devices using AQUOS LINK ............. 20
AQUOS LINK connection ............................................ 20
AQUOS LINK Setup .................................................... 21
Operating an AQUOS LINK device .............................. 22
Menu operation................................................................ 23 What is the MENU? .................................................... 23Common operations .............................................. 23 Basic adjustment ............................................................. 24
Picture Settings  ........................................................... 24
AV MODE .............................................................. 25
Audio Settings ............................................................ 25
Power Save Settings ................................................... 26
Channel Settings  ......................................................... 27
Auto Installation ..................................................... 27
Digital channel settings .......................................... 27
Analogue channel settings ..................................... 28
Password/Parental lock settings ............................ 29
Language Settings (language, subtitle, multi audio) ..... 29
Useful Viewing functions ................................................ 30 Selecting the picture size ............................................ 30Selecting the WSS (Wide Screen Signalling) picture size automatically  ..................................... 30
Selecting the WSS (Wide Screen Signalling)  picture size manually ........................................... 30
Selecting the picture size manually ......................... 30
Selecting the recording picture size manually ......... 31
Selecting the HDMI picture size automatically ........ 31
Other picture and audio settings ................................. 31 Adjusting image position ........................................ 31
Automatic volume adjustment ................................ 31
Emphasising dialogue ............................................ 31
Outputting audio only  ............................................. 31
Display Settings .......................................................... 32 Channel display ..................................................... 32
Time and Title display ............................................ 32
Other useful features ...................................................... 33 Setting when using external devices ........................... 33Input source settings ............................................. 33
Skipping specified inputs ....................................... 33
Colour system settings .......................................... 33
Additional features ...................................................... 33
Connecting a USB device ........................................... 34
USB Photo Viewer/Music Player ................................. 34 Photo Mode  ........................................................... 34
Music Mode ........................................................... 35
USB device compatibility ............................................ 35
Connecting a PC  .............................................................. 36
Connecting a PC ........................................................ 36 Setting audio input ................................................. 36
Displaying a PC image on the screen .......................... 36 Selecting the picture size ....................................... 36
Adjusting the PC image automatically .................... 37
Adjusting the PC image manually ........................... 37
Selecting input resolution ............................................ 37
RS-232C port specifications ....................................... 38
PC compatibility chart ................................................. 39
RS-232C command list............................................... 39
Appendix ...............................................................\
........... 40 Troubleshooting ..........................................................\
 40
Updating your TV via DVB-T ....................................... 41
Reset ..................................................................\
........ 41
Identification................................................................ 41
Specifications .........................................................\
.... 42
Optional accessory ..................................................... 42
End of life disposal ...................................................... 43
The illustrations and the OSD (On-Screen Display) in this operation manual are for explanation purposes and may vary slightly 
from the actual operations.
The examples used throughout this manual are based on the LC-52D65E model.
LC-46DH65E, LC-46DH65S, LC-52DH65E and LC-52DH65S models are compatible with H.264 (MPEG4 H.264, MPEG4 
AVC, MPEG4 AVC/H.264) compressed broadcasts.
•
•
•
Contents
 1
ENGLISH
ENGLISH
 
						

							
Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. 
Do not use liquid cleaners or aerosol cleaners.
Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, 
swimming pool and in a wet basement.
Do not place vases or any other water-filled containers on this product. The water may spill onto the 
product causing fire or electric shock.
Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause th\
e 
product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, 
stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When 
mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting 
hardware recommended by the manufacturer.
When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, 
excessive force and uneven floor surface can cause the product to fall from the cart.
Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover or 
block these vents and openings since insufficient ventilation can cause overheating and/or shorten the 
life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they 
can block ventilation openings. This product is not designed for built-in installation; do not place the 
product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the 
manufacturer’s instructions are followed.
The LCD panel used in this product is made of glass. Therefore, it can break when the product is 
dropped or impact applied. If the LCD panel is broken, be careful not to be injured by broken glass.
Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating 
products (including amplifiers).
To prevent fire, never place any type of candle or naked flames on the top or near the\
 TV set.
To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.
Do not display a still picture for a long time, as this could cause an afterimage to remain.
There is power consumption always if main plug is connected.
Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high 
voltage and other dangerous conditions. Request a qualified person to perform servicing.
The LCD panel is a very high technology product, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pi\
xels may appear on the screen as a fixed point of 
blue, green or red. This is within product specifications and does not constitute a fault.
Precautions when transporting the TVWhen transporting the TV, never carry it by holding onto the speakers. Be sure to always carry the TV by two people holding 
it with two hands—one hand on each side of the TV. •
•
•
•
•
•
•
•
•
•
•
•
•
Introduction
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-
free operation of your product, please read the Important Safety Precautions carefully before using this product.
Important Safety Precautions
Trademarks
“HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”•
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
•
•
The “HD ready” Logo is a trademark of EICTA.
•The DVB logo is the registered trademark of the Digital Video Broadcasting—DVB—project.
•
“x.v.Colour” and 
 are trademarks of Sony Corporation.
•
NOTELC-46D65E and LC-52D65E models are compatible with Dolby Digital.
LC-46DH65E, LC-46DH65S, LC-52DH65E and LC-52DH65S models are compatible with Dolby Digital Plus.
•
•
 2
 
						

							
Introduction
15
16
17
18
19
20
21
22
23
24
25
4 
3 
2 
5 
6 
7 
8 
9 
10 
11 
12 
13 
14  1 
B
 (Standby/On)
(Page 10)
Buttons for useful operations
m  (Teletext)
ATV: Display analogue teletext (Page 
14).
DTV: Select MHEG-5 and teletext for 
DTV (Page 14).
k  (Reveal hidden Teletext)
(Page 14)
[  (Subtitle)
Switch subtitle languages on/off 
(Pages 14 and 29).
3  (Freeze/Hold)
Press to freeze a moving image on 
the screen.
Teletext: Stop updating teletext 
pages automatically or release the 
hold mode.
1  (Subpage)
(Page 14)
v  (Top/Bottom/Full)
Set the area of magnification in 
teletext mode (Page 14).
0–9 numeric buttons
Set the channel.
Enter desired numbers.
Set the page in teletext mode. When the five Nordic countries 
(Sweden, Norway, Finland, 
Denmark, or Iceland) are selected 
in the country setting from “Auto 
Installation” (page 27), DTV 
services are four digits. When 
another country is selected, DTV 
services are three digits.
A  (Flashback)
Press to return to the previously 
selected channel or external input.
DTV
Press to access digital TV mode.
AT V
Press to access conventional 
analogue TV mode.
2  (Sound mode)
Select a sound multiplex mode 
(Page 10).
i k/l  (Volume)
Increase/decrease TV volume.
e  (Mute)
TV sound on/off.
f  (WIDE MODE)
Select a wide mode (Pages 30 and 
36).
AV MODE
Select a video setting (Page 25).
1
2
3
•
4
5
6
7
8
9
0
Q END
Exit the “MENU” screen.
R/G/Y/B (Colour) buttons
The coloured buttons are 
correspondingly used to select the 
coloured items on the screen (e.g. 
EPG, MHEG-5, Teletext).
b
 (INPUT SOURCE)
Select an input source (Page 10).
EPG
DTV: Display the EPG screen (Pages 
11–13).
RADIO
DTV: Switch between Radio and 
Data mode. When only data broadcasting (no 
radio broadcasting) is transmitted 
by DVB, the radio broadcasting 
will be skipped.
P. INFO
Press to display programme 
information which is transmitted 
through digital video broadcasting in 
the upper left corner of the screen 
(DTV only).
P r /s
Select the TV channel.
p  (Display information)
Press to display the station 
information (channel number, signal, 
etc.) in the upper right corner of the 
screen (Page 32).
SLEEP
Press to schedule a time for the TV 
to automatically standby (Page 26).
MENU
“MENU” screen on/off.
6  (Return)
Return to the previous “MENU” 
screen.
ACTION (Action Mode)
This key does not work on this 
model.
AQUOS LINK buttons
If external equipment such as a 
AQUOS BD Player is connected via 
HDMI cables and is AQUOS LINK 
compatible, you can use these 
AQUOS LINK buttons. See pages 20 
and 22 for details.
E
R
T
Y
U
•
I
O
P
A
S
D
F
G
Remote control unit
a /b /c /d  (Cursor)
Select a desired item on the setting 
screen.
OK
Execute a command within the 
“MENU” screen.
ATV/DTV: Display the programme 
list when no other “MENU” screen is 
running.
W
 3
 
						

							
Introduction
16
2
13
78910
456
1312
11
14
15
EXT4 (ANALOGUE RGB/AUDIO) 
terminals*
HDMI1 (HDMI) terminal
HDMI2 (HDMI/AUDIO) terminals*
EXT3 (COMPONENT/AUDIO) 
terminals
OUTPUT (AUDIO) terminals
DIGITAL AUDIO OUTPUT terminal
1
2
3
4
5
6
TV (Front view)
TV (Rear view)
Antenna terminal
RS-232C terminal
EXT1 (RGB) terminal
EXT2 (RGB) terminal
COMMON INTERFACE slot
EXT8 terminals
HDMI3 (HDMI) terminal
USB terminal
Headphones
AC INPUT terminal
7
8
9
10
11
12
13
14
15
16
WARNING:Excessive sound pressure from earphones and headphones can cause hearing loss.
 4
OPC sensor
Remote control sensor
OPC indicator B (Standby/On) indicator
MENU button
a
 (Power) button
i k/l  Volume 
buttons P r /s
Programme (channel) 
buttons b  (INPUT SOURCE) 
button
The HDMI2 and EXT4 terminals 
can both use the same audio input 
terminal. However, the proper item 
must be selected in the “PC Audio 
Select” menu (Refer to page 36 for 
details).
*
 
						

							
Confirm that there are eight screws (four short 
screws and four long screws) with the stand 
unit.
Attach the supporting post for the stand unit 
onto the base using the four long screws with 
the hex key (supplied) as shown.
1
2
Preparation
Inserting the stand.Insert the stand into the openings on the 
bottom of the TV (Hold the stand so it will 
not drop from the edge of the base area).
Insert and tighten the four short screws into 
the four holes on the rear of the TV.3
1
2
NOTETo detach the stand unit, perform the steps in reverse 
order.•
Supplied accessories
Attaching the stand unit
Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent 
it from being damaged.
CAUTION Attach the stand in the correct direction.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
•
•
•
•
 5
Remote control unit 
(g 1) AC cord (
g1) Stand unit ( g1)
Cable clamp ( g1)
Pages 3 and 6 Page 5Page 8
Page 8
Operation manual (This publication)
•
“AAA” size alkaline battery (g2) ... Page 6
•
Product shape varies in some countries.
Long 
screw
Short 
screw
Hex key
Supporting  post Soft 
cushion
Hex key
 
						

							
Preparation
Inserting the batteries
Before using the TV for the first time, insert two supplied “AAA” size \
alkaline batteries. When the batteries become 
depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.Open the battery cover.
Insert two supplied “AAA” size alkaline batteries.
Place batteries with their terminals corresponding to the 
(e ) and ( f) indications in the battery compartment.
Close the battery cover.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below. Do not mix batteries of different types. Different types of batteries have different characteristics.
Do not mix old and new batteries. Mixing old and new batteries can short\
en the life of new batteries or cause 
chemical leakage in old batteries.
Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you 
find any chemical leakage, wipe thoroughly with a cloth.
The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
When replacing the batteries, use alkaline batteries instead of zinc-carbon on\
es.
Note on disposing batteries:
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household 
rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial 
businesses.
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control 
unit and sensor may prevent proper operation.
1
2
•
3
•
•
•
•
•
•
Cautions regarding the remote control unit
Do not expose the remote control unit to shock. In addition, do not expose the 
remote control unit to liquids, and do not place in an area with high humidity.
Do not install or place the remote control unit under direct sunlight. The heat 
may cause deformation of the unit.
The remote control unit may not work properly if the remote control sensor of 
the TV is under direct sunlight or strong lighting. In such cases, change the 
angle of the lighting or the TV, or operate the remote control unit closer to the 
remote control sensor.
•
•
•
30° 30°
 6
5 m
Remote control sensor
 
						

							
Quick guide
123
Initial installation overview
Follow the steps below one by one when using the TV for the first time. \
Some steps may not be necessary 
depending on your TV installation and connection.Connect an antenna cable to 
the antenna terminal (Page 8).
If necessary, insert a CA card 
into the CI slot to watch 
scrambled broadcasts (Pages 
8 and 19).
Connect the AC cord to the TV 
(Page 8).
Product shape varies in some countries.
n
o
pTurn on the power using  a on 
the TV (Page 10).
Run the initial auto installation 
(Page 9).
Language setting
English
Italiano
Svenska
Home/Store setting
STORE
HOME
Country setting
Austria A  B/G
Finland FIN B/G
Greece GR B/G
Channel search setting
Analogue Search
Digital Search
n
o
✔
✔
✔
✔ Congratulations!
Now you can watch TV.
If necessary, adjust the 
antenna to attain maximum 
signal reception (Page 9).
n
o
 7
Preparation
Power on and 
run the auto installation Watch TV
Connect 
external devices
Connect external 
devices such as a 
DVD player/recorder 
as instructed (Pages 
15–17).
Connect external 
audio devices such as 
speakers/amplifier as 
instructed (Pages 15 
and 18).
n
o
Start searching  channels
 
						

							
Quick guide
Supplying power to the antennaYou must supply power to the antenna in order to receive 
digitally/terrestrially broadcast stations after connecting the 
antenna cable to the antenna terminal on the rear of the TV.
Press MENU  and the “MENU” screen displays.
Press  c/d  to select “Setup”.
Press  a/b  to select “Antenna Setup-DIGITAL”, and then press 
OK .
Press  a/b  to select “Supply Voltage”, and then press  OK.
Press  c/d  to select “On”, and then press  OK.
1
2
3
4
5
Mounting the TV on a wallThis TV should be mounted on a wall only with the wall mount bracket ava\
ilable from SHARP (Page 
42). The use of other wall mount brackets may result in an unstable installation and may cause 
serious injuries.
Mounting the LCD colour TV requires special skills and should only be performed by qualified service 
personnel. Customers should not attempt to do the work themselves. SHARP\
 bears no responsibility 
for improper mounting or mounting that results in accident or injury.
You can ask qualified service personnel about using an optional bracket t\
o mount the TV to a wall.To use this TV mounted on a wall, first remove the adhesive tape at the two locations on the rear of the TV, and 
then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.
When you mount the TV on a wall, you should attach the supporting post.
When using wall mount bracket AN-52AG4You can check the centre of the TV screen using the mark engraved on the wall mount bracket when mounting 
the TV on the wall.
LC-46D65E, LC-46DH65E, LC-46DH65S: The centre of the TV screen is at the mark “b” on the wall bracket.
LC-52D65E, LC-52DH65E, LC-52DH65S: The centre of the TV screen is 7.3 mm below the mark “f” on the wall bracket.
•
•
•
•
•
Before turning on the power
Bundling the cables
 8
Carefully insert the CI 
Module in the CI slot 
with the contact side 
forward.
The logo on the CI 
Module must be 
facing outward from 
the rear of the TV.
1
2
Cable clamp
Bundle the cables with  the clamp. AC cord
Place the TV close to the 
AC outlet, and keep the 
power plug within reach.
Standard 
DIN45325 plug 
(IEC 169-2) 75 
q 
coaxial cable
Product shape varies in some countries.