Sharp Lc 46d65e Operation Manual

Basic adjustment
Child Lock
Setup
Allows you to use a PIN to protect certain settings 
from being accidentally changed.
Change PIN
Register a four-digit password number to use the 
“Child Lock” function.Enter the four-digit number as a PIN using  0–9 
numeric buttons.
Enter the same four-digit number as in step 1 to confirm.“The system PIN has been changed successfully” displays.
NOTETo view a locked channel, you must enter the PIN (See pages 27 
and 28 for locking channels from viewing in DTV and ATV...

Useful Viewing functions
WSS
Setup
WSS signal 4:3 screen
4:3 Mode
Setup
The “WSS” signal has 4:3 auto-switching that allows 
you to select between “Normal” and “Panorama”.4:3 mode “Panorama”
4:3 mode “Normal”
The “WSS” allows the TV to switch automatically 
among the different picture size.
NOTE
Use “WIDE MODE” if an image does not switch to the 
appropriate picture size. When the broadcast signal 
contains no “WSS” information, the function will not work 
even if enabled.
Selecting the WSS (Wide Screen...

You can use this menu to set the appropriate picture 
size for viewing a 16:9 format TV programme on a 4:3 
TV.
REC Picture Size
Digital Setup
Setting to “4:3 TV” Setting to “16:9 TV”
This function allows you to automatically change to the 
appropriate picture size when viewing an HDMI signal 
using the HDMI1, 2 and 3 terminals.
Other picture and audio settings
Adjusting image position
HDMI Auto View
Setup
NOTEThis function must be set before recording.
Selecting the HDMI picture size 
automatically
•...

Useful Viewing functions
Time Display
Option
Time Format
You can select the time format (either “24HR” or “AM/
PM”) for the clock time.
Game Play Time
Option
This function allows you to display the elapsed time on 
the screen when “AV MODE” is set to “GAME”.
Programme Title Display
Option
This function allows you to display programme 
information such as the title and airtime by tuning a 
channel.
NOTE
This function is available only when the DTV mode is 
selected.
•
Time Display
This function allows...

Other useful features
Input Select
Option
For setting the signal type of external equipment.
NOTE
If no (colour) image displays, try changing to another 
signal type.
Check the operation manual of the external equipment for 
the signal type.
•
•
Input Label
Setup
You can label each input source with a custom 
description.
Press  b to select the desired input source.
Go to “MENU” > “Setup” > “Input Label”.
Press  a/b /c /d  to select each character of the 
new name for the input source, and then press...

Other useful features
Connecting a USB device
Connect an USB device to the TV as shown below.
Depending on the USB device, the TV may not be able to 
recognise the contained data.
Use only alphanumeric characters for naming files.
File names over 80 characters (may vary depending on 
character set) may not be displayed.
Do not disconnect a USB device or memory card from the 
TV while transferring files, using the slide show function, 
when a screen is switching to another or before you exit 
“USB” from...

Slide showSelecting the BGM
File name
SONGS
Demo/Demo1
CLASSIC
SONG_01.MP3
SONG_02.MP3
SONG_03.MP3
SONG_04.MP3
SONG_05.MP3
SONG_06.MP3
SONG_07.MP3
SONG_08.MP3
SONG_09.MP3 Time
3:05
3:15
3:02
6:05
4:52
0:00
3:13
3:23
3:33
Playing: SONG_02.MP3
Slide Show BGM:SONG_03.MP3 1:00 / 3:15
Buttons for slide show BGM select 
operation
Buttons Description
OK When selecting the folder icon with the 
6 mark: Go back to the parent directory.
When selecting a folder icon: Enter this 
directory.
When selecting a music...

Connecting a PC
When using the EXT4 terminal, you must select “EXT4 (RGB)” in th\
e 
“PC Audio Select” menu (Refer to the right column for details).
NOTEThe PC input terminals are DDC1/2B-compatible.
Refer to page 39 for a list of PC signals compatible with the TV.
A Macintosh adaptor may be required for use with some Macintosh 
computers.
When connecting to a PC, the input signal type is automatically 
detected except 1,024 g 768 and 1,360  g 768 signals.
*
•
•
•
•
Analogue Connection
NOTERefer to page...

Connecting a PC
Press a/b  to select the specific adjustment 
item.
Press  c/d  to adjust the item to the desired 
position.1
2
Reset 
H-Pos. [ 90]  ab
ab
ab
ab
V-Pos. 
Clock 
Phase [ 39] 
[ 90] 
[ 20] 
NOTEYou can only select the “Input Signal” on the “Setup” menu 
when receiving one of the two input signals listed above.
•
1024 x 768
1360 x 768
(Example)
Fine Sync.
Setup
NOTEFor resetting all adjustment items to the factory preset 
values, press 
a/b  to select “Reset”, and then press  OK.
“Clock” and...

Connecting a PC
C1 C2 C3 C4 P1  P2  P3  P4
Communication conditionsSet the RS-232C communications settings on the PC 
to match the TV’s communications conditions. The 
TV’s communications settings are as follows:
Baud rate:9,600 bps
Data length:  8 bits
Parity bit: None
Stop bit: 1 bit 
Flow control: None
Communication procedureSend the control commands from the PC via the RS-
232C connector.
The TV operates according to the received command 
and sends a response message to the PC.
Do not send multiple...