Sharp Lc 46d65e Operation Manual

Quick guide
Initial auto installation
When the TV is powered on for the first time after 
purchase, the initial auto installation wizard appears. 
Follow the menus and make the necessary settings 
one after another.Press  a on the TV.
The initial auto installation wizard appears.
Setting the OSD language.
English
Italiano
Svenska
Press  a/b /c /d  to select the desired language, 
and then press  OK.
Selecting the location of the TV.
STORE
HOME
Press  c/d  to select where you will use this TV, 
and then...

Watching TV
Selecting a sound mode
DTV mode:
If multi sound modes are received, each time you 
press 2 the mode switches as follows.
Audio (ENG) : STEREO
L/R LRLR
Audio (ENG) : CH A
CH A CH B CH AB
Audio (ENG) : MONO
Press c/d  to select L or R sound when the STEREO 
or DUAL MONO screen is displayed.
Audio (ENG) : STEREO
L/R LRLR
NOTEThe sound mode screen disappears in six seconds.
Selectable items vary depending on the received broadcasts.
ATV mode:
Each time you press  2, the mode switches as 
shown...

Watching TV
Useful functionsE
Common Operation
Press MENU  and the “MENU” screen displays.
Press  c/d  to select “Digital Setup”.
Press  a/b  to select “EPG Setup”, and then 
press  OK.
Digital Setup 
REC Picture Size
Download Setup
EPG Setup
Subtitle
CI Menu [Yes]
[16:9 TV]
Press 
a/b  to select the desired item, and then 
press  OK (Example: “EPG Setup”, “Display 
Range Setup”, etc.).
Ye s No
EPG Setup
Display Range Setup
Genre Icon Setup
Press 
a/b /c /d  to select or adjust the desired 
item, and...

Check programme information
Press a/b /c /d  to select the programme you 
want to check.
Press  R.
040
10 : 00AM - 1 : 00 AM BBC News 24
BBC News
Programme Info. Back to EPG The BBC’s rolling news service with headlines every 15 minutes.
10 AM11 0 PM 1 2 3
BBC TWO    002
BBC THREE   007
BBC FOUR    010
BBC FIVE    012
CBBC Channel  030
BBC 1     061
BB22     062
BBC NEWS 24  340
BBCi     351 This is BBC THREE 
BBC NEWS BBC NEWS 
BBC NEWS BBC NEWS 
BBCi BBCi 
This is BBC THREE 
RNextB
Press 
OK to tune...

Watching TV
Timer recording using EPG
You can record TV programmes using data from the 
EPG.Press  EPG.
Press  a/b /c /d  to select the programme you 
want to record, and then press  OK.
Press  c/d  to select the preferred timer setting, 
and then press  OK.
Watch Record No
If you select “No”, the TV returns to the EPG screen.
Watching a programme at a set time
Press c/d  to select “Watch”, and then press 
OK .
Press  c/d  to select “Yes”, and then press  OK.
The selected TV programme is marked with an...

Buttons for teletext operations
Buttons Description
P r /s Increase or decrease the page number.
Colour (R/G/
Y/B) Select a group or block of pages 
displayed in the coloured brackets at the 
bottom of the screen by pressing the 
corresponding 
Colour (R/G/Y/B)  on the 
remote control unit.
0–9 Directly select any page from 100 to 899 
by using the 0–9  numeric buttons.
v  (Top/
Bottom/Full) Switch the teletext image to Top, Bottom 
or Full.
k  (Reveal 
hidden 
Teletext) Reveal or hide hidden...

Connecting external devices
Before connecting ...
Be sure to turn off the TV and any devices before making any connections.
Firmly connect a cable to a terminal or terminals.
Carefully read the operation manual of each external device for possible connection types. This also helps you 
get the best possible audiovisual quality to maximise the potential of t\
he TV and the connected device.
Refer to page 36 for connecting a PC to the TV.
Introduction to connections
The TV is equipped with the terminals...

Connecting external devices
HDMI connection
The HDMI connections (High Definition Multimedia 
Interface) permit digital video and audio transmission 
via a connection cable from a player/recorder. The 
digital picture and sound data are transmitted without 
data compression and therefore lose none of their 
quality. Analogue/digital conversion is no longer 
necessary in the connected devices, which also would 
result in quality losses.
DVI/HDMI conversionUsing a DVI/HDMI cable, the digital video signals...

Connecting external devices
NOTEIn cases when the decoder needs to receive a signal from the TV, make sure to select the appropriate input terminal to which 
the decoder is connected in “Manual Adjust” in the “Analogue Se\
tting” menu (Page 28).
TV-VCR advanced AV Link systems may not be compatible with some external sources.
You cannot connect the VCR with decoder using a fully wired SCART cable when selecting “Y/C” under “EXT2” in the “Input 
Select” menu.
Controlling devices with SCART using AV Link...

Connecting external devices
DIGITAL AUDIO IN AUX1 IN L 
R AUX OUT  L 
R 
Connecting an amplifier with analogue 
audio inputEConnecting an amplifier with digital audio 
inputE
Speaker/amplifier connection
Connect an amplifier with external speakers as shown below.
After connecting
Digital audio output setting
After connecting an amplifier with digital audio 
input and external speakers as shown, you should 
set an audio output format compatible with 
the programme you are watching or the device...