Sharp Lc 37ga3e Operation Manual

39
Useful adjustment settings
Colour system setting (for TV/AV
input mode)
You can change the colour system to one that is
compatible with the image on the screen.
Press MENU and the MENU screen displays.
1
2
4
3
Press c/d to select “Option”.
Press a/b to select “Colour System”, and
then press OK.
Press a/b to select a compatible video
signal system of your equipment, and then
press OK.
• “NTSC 3.58” cannot be selected in TV tuner
mode.
AUTO
PAL
SECAM
NTSC 3.58
NTSC 4.43
PAL-60
NOTE
• Factory preset...

40
Useful adjustment settings
AV mode selection
AV mode gives you five viewing options to choose from
to best match the system environment, which can vary
due to factors like room-brightness, type of programme
watched or the type of image input from external
equipment.
Press AV MODE again before the mode
displayed on the screen disappears.
• The mode changes as shown below.
2
Press AV MODE.
• Present AV mode displays.1
NOTE
• You can select a different AV MODE item for each input
mode. (For example,...

25
Language setting for on-screen
display
You can also select a language from setup menu.
Select from among 13 languages.
3
Press MENU and the MENU screen displays.1
2
4
Press c/d to select “Setup”.
Press a/b to select “Language”, and then
press OK.
Press a/b/c/d to select the desired
language listed on the screen, and then
press OK.
OPC setting
Automatically adjusts the brightness of the screen.
Press c/d to select “Picture”.
2
Using OPC on the menu screen
Press MENU and the MENU screen displays.
1...

42
Useful adjustment settings
WIDE MODE
Normal
Cinema
Full
Dot by Dot
Input signal
(640m480)
Input signal
(1024m768)WIDE mode (for PC input mode)
You can select the screen size.
a
Press f.
• The WIDE MODE menu displays.
1
2Press f or a/b to select a desired item on
the menu.
WIDE MODE
Cinema
Full
Dot by Dot
Input SignalNormal Dot by DotFull Cinema
Input SignalNormal Dot by DotFull Cinema
640g480 Keeps the original
aspect ratio in a full
screen display.Keeps the original
aspect ratio in a full
screen...

43
3
4
Useful adjustment settings
Input signal (PC input mode only)
• Some input signals may have to be registered manually
to display properly.
• The pairs of input signals (resolutions) in the list below
are not distinguishable when received. In such case, you
have to set the correct signal manually. After setting once,
it will display when the same signal (resolution) is input
again.
Press MENU and the MENU screen displays.1
Press a/b to select “Input Signal” and then
press OK.
Press a/b to select the...

44
Useful adjustment settings
Rotate
You can set the orientation of the picture.
Press MENU and the MENU screen displays.
1
2Press c/d to select “Setup”.
Press a/b to select “Rotate”, and then press
OK.
3
[Normal]: normal image. [Mirror]: mirror image.
ABCABC
4Press a/b to select the desired mode, and
then press OK.
[Upside Down]: upside
down image.[Rotate]: rotated image.
ABCABC
LC-37GA3E(E)-i04.6.25, 8:04 AM 44
 

45
Useful adjustment settings
Sleep timer
Allows you to set a time when the TV automatically
switches to standby.
0 hr. 30 min. 1 hr. 00 min. 1 hr. 30 min.
2 hr. 30 min. 2 hr. 00 min. Off
Each time you press SLEEP, the remaining
time switches as shown below.
• When the time has been set, countdown
automatically starts.
• Five minutes before the preset of time expires,
the remaining time displays each minute.
Press SLEEP.
• Remaining time displays when sleep timer has
been set.
Sleep Timer: Remain 2 hr....

46
PIN setting for child lock (for TV/AV
input mode)
Allows you to use a PIN to protect certain settings from
being accidentally changed.
Press MENU and the MENU screen displays.
1
2
3Press a/b to select “Child Lock”, and then
press OK.
5
6Enter the 4-digit number as a PIN using 0 –
9. Press a/b to select “Change PIN”, and then
press OK.
Enter the same 4-digit number as in step 6
to confirm.
• “The system PIN has been changed
successfully” displays.
7
NOTE
• To view a locked channel (Lock setting in...

25
Language setting for on-screen
display
You can also select a language from setup menu.
Select from among 13 languages.
3
Press MENU and the MENU screen displays.1
2
4
Press c/d to select “Setup”.
Press a/b to select “Language”, and then
press OK.
Press a/b/c/d to select the desired
language listed on the screen, and then
press OK.
OPC setting
Automatically adjusts the brightness of the screen.
Press c/d to select “Picture”.
2
Using OPC on the menu screen
Press MENU and the MENU screen displays.
1...

48
Useful features
Dual screen functions
Allows you to display two pictures on the screen at
one time.
Dual screen
You can display two pictures except when inputting
from the INPUT 5 terminal.
Press c.
• Dual screen displays and a selected input
source image displays.
2
3
NOTE
• This function does not work under the following input
conditions:
1INPUT 5 mode,
2Two pictures from the same source (e.g. INPUT 1 and
INPUT 1),
3Two pictures with different vertical frequency (e.g. PAL
and PAL-60),
4HDTV signal...