Sharp Lc 37ga3e Operation Manual

19
Basic adjustment settings
TV/AV input mode menu items
List of AV menu items to help you with operations
OPC ................................................ Page 25
Backlight ........................................ Page 26
Contrast ......................................... Page 26
Brightness ..................................... Page 26
Colour ............................................ Page 26
Tint ................................................. Page 26
Sharpness...

16
W
Using SOUND on the remote contr
In the NICAM 
When receiving a stereo signal
Each time you press SOUND, the mode switches
between NICAM STEREO and MONO.
In the 
When receiving a stereo signal
Each time you press SOUND, the mode switches
between STEREO and MONO. When receiving a bilingual signal
Each time you press SOUND, the mode switches
among NICAM CH A, NICAM CH B, NICAM CH AB
and MONO.
When receiving a monaural signal
Each time you press SOUND, the mode switches
between NICAM MONO and MONO.
When...

21
Basic adjustment settings
Press a/b to select “Manual Adjust”, and
then press OK.4
Next 01 SAT.102 PR0703 KABEL
Programme Setup “Manual Adjust” menu
NOTE
• When you exit Programme Setup “Manual Adjust” menu,
preset download automatically runs if you change
information on that menu.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.1
2
3
5Press c/d to select “Yes”, and then press
OK.You can select one of the following settings.
1Fine
2Colour system (See page 22.)
3Sound system (See...

22
Basic adjustment settings
3
Press a/b/c/d to select the channel you
want to edit, and then press OK.
• The selected channel information displays.
1
2
Press a/b to select the optimum colour
system, and then press OK. Press a/b to select “Colour sys.”, and then
press OK.
• Receivable colour systems are listed.
(AUTO, PAL, SECAM, NTSC4.43, PAL-60)
Sound system (Broadcasting system)
3
Press a/b/c/d to select the channel you
want to edit, and then press OK.
• The selected channel information displays....

23
Basic adjustment settings
3
Press a/b/c/d to select the channel you
want to edit, and then press OK.
• The selected channel information displays.
Press a/b to select “Skip”, and then press
OK.
• Skip menu displays.
1
2
Press a/b to set “Skip” to “On”, and then
press OK.
Setting the decoder
When connecting a decoder to the unit, you need to
assign the terminal input.
Press a/b/c/d to select the channel you
want to edit, and then press OK.
• The selected channel information displays.
1
3
Press a/b/c/d...

24
Basic adjustment settings
Sort menus
Sort
Channel positions can be sorted freely.
01
06SAT.1KABEL01 SAT.1
02 03 04 05
Next
01 SAT.1 02 KABEL
Next 01 SAT.1KABEL 02
01 KABEL
Next
01 KABELSAT.1 02
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.1
2
3
Press a/b to select “Sort”, and then press
OK.4
6
7
Press c/d to select “Yes”, and then press
OK.
Press a/b/c/d to select the channel you
want to move, and then press OK.5
8
Move it to the desired position by pressing
a/b/c/d, and then...

25
Language setting for on-screen
display
You can also select a language from setup menu.
Select from among 13 languages.
3
Press MENU and the MENU screen displays.1
2
4
Press c/d to select “Setup”.
Press a/b to select “Language”, and then
press OK.
Press a/b/c/d to select the desired
language listed on the screen, and then
press OK.
OPC setting
Automatically adjusts the brightness of the screen.
Press c/d to select “Picture”.
2
Using OPC on the menu screen
Press MENU and the MENU screen displays.
1...

26
Basic adjustment settings
Picture adjustments
Adjust the picture to your preference with the following
picture settings.Press MENU and the MENU screen displays.
1
2
3
4
Press a/b to select a specific adjustment
item.
Press c/d to adjust the item to your desired
position. Press c/d to select “Picture”.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, and then press OK.
Adjustment items for PC source Adjustment items for AV source
MENU    [
Picture]...

27
Basic adjustment settings
C.M.S. (Colour Management System)
Colour tone is managed using the six-colour
adjustment setting.
Press MENU and the MENU screen displays.
1
2Press c/d to select “Picture”.
3Press a/b to select “Advanced”, and then
press OK.
4Press a/b to select “C.M.S.-Hue”, and then
press OK.
5Press a/b to select a specific adjustment
item.
Press c/d to adjust the item to your desired
position.
6
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select...

28
Monochrome
For viewing a video in monochrome.
Press a/b to select “Monochrome”, and
then press OK.
Press c/d to select “On”, and then press
OK. Repeat steps 1 to 3 in 3D-Y/C.
1
2
3
Basic adjustment settings
3D-Y/C
Provides high quality images with minimal dot crawl
and cross colour noise.
Description
Normal adjustment
For movie image
For still image
Selected item
Standard
Fast
Slow
4Press a/b to select “3D-Y/C”, and then
press OK. Press MENU and the MENU screen displays.
1
2Press c/d to select...