Sharp Ar153e N Manual

INDEX
CONTENTS
25
4
Reference:Plug and Play Screen does not Appear (when the USB is connected)
CHECK1Is there enough computer memory or hard 
disk space?
To use this unit, you must have an adequate 
amount of hard disk space. If there is insufficient 
hard disk space, delete unnecessary files to 
increase the free space of the hard disk. If there is 
insufficient memory, close unnecessary applications 
to increase memory available for printing or 
scanning. If you are still unable to print or scan,...

INDEX
CONTENTS
26
4
If the Plug and Play screen does not appear after you connect the unit to your computer with a USB cable and turn on 
the power of both devices, follow the steps below to verify that the USB port is available.
1Click the start button, click Control Panel, and 
then click Performance and Maintenance.
On Windows 98/Me/2000, click the Start button, select 
Settings, and then click Control Panel.
2Click System, click the Hardware tab, and click 
the Device Manager button.
Universal Serial...

INDEX
CONTENTS
27
4
If the MFP driver cannot be installed under Windows 2000/XP, check your computers settings according to the following 
procedure.
1Click the start button, and then click Control 
Panel.
On Windows 2000, click the Start button, select 
Settings, and then click Control Panel.
2Click Performance and Maintenance, and then 
click System.
On Windows 2000, double-click the System icon.
3Click the Hardware tab, and then click the Driver 
Signing button.
The following dialog box will open....

INDEX
CONTENTS
28
4
If print output is faint, uneven or smeared, follow the steps listed below.
CHECK1Has the printer driver been specified to suit 
both paper and the print job?
You can select Draft, Normal or Photo for the 
print quality in the Advanced tab of the printer 
driver setup screen. When Photo is selected, you 
can click the Image Adjustment button and adjust 
the brightness and contrast in the dialog box that 
appears. Adjust these settings appropriately for 
your print data and try...

INDEX
CONTENTS
29
4
If a document is printed skewed or partly off the paper, follow the steps listed below.
CHECK1Is the paper size loaded in the tray the same 
as that specified in the printer driver?
Check if the Paper Size options suit the size of the 
paper loaded in the tray.
If the Fit To Page setting is activated, make sure 
that the paper size selected from the drop-down list 
of the Fit To Paper Size option is the same as the 
size of the loaded paper.
CHECK2Is the orientation of document...

INDEX
CONTENTS
30
4
If nothing prints even when the unit is turned on, please wait a few moments. The unit needs a longer time to process  
intricate data. If the unit still does not print, refer to the check list below.
CHECK1Has a paper jam occurred?
When the misfeed ( ) indicator blinks or ( ) 
blinks in the display, the unit will stop because of a 
misfeed.
Remove the jammed paper as explained in 
MISFEED REMOVAL in the Operation Manual.
CHECK2Is the ONLINE indicator off?
The ONLINE indicator on the...

INDEX
CONTENTS
31
4
If you get poor quality as a result of a scanning job, and you cannot improve the quality by changing preferences, refer 
to the check list shown below.
CHECK1Is the original clean?
Check your original before scanning. If any dust 
sticks to the original, you cannot obtain a clean 
result. In addition, make sure that the original table 
is also clean.
CHECK2Have you specified a suitable resolution?
Make sure that the value for the Resolution setting 
in the scanner driver satisfies...

INDEX
CONTENTS
32
4
If the scanned image is incorrectly positioned, refer to the check list shown below.
CHECK1Have you placed the original straight?
Place the original straight on the original table.
Reference: Refer to ORIGINAL PLACEMENT in the 
Operation Manual for the detail on how to 
set the original.
CHECK2Have you set the original correctly on the 
original table?
Place the original on the original table in the 
direction as shown in the illustration below.
CHECK3Have you set the original...

INDEX
CONTENTS
33
4
If you cannot scan the image, turn off your computer. Press the power switch on the unit to turn it off, unplug the unit from the power 
source, and then plug it back in. Restart your computer. Try scanning again. If scanning is still not possible, refer to the ch eck list below.
CHECK1Is your application compliant to TWAIN?
If you are using Windows 98/Me/2000 and your 
application is not TWAIN compliant, the application 
cannot acquire images. Use an application that is 
TWAIN...

INDEX
CONTENTS
34
4
If printing or scanning is not possible, or Button Manager does not function correctly, check the items in Nothing Prints 
or  Unable to Scan the Image
. If you still cannot solve the problem, follow the steps below to uninstall SHARP Personal 
MFP series software (MFP driver (printer driver/scanner driver), Button Manager), and then reinstall it.
1Click the start button, and then click Control 
Panel.
On Windows 95/98/Me/NT 4.0/2000, click the Start 
button, select Settings, and then...