Sharp AR 5520D User Manual

							MODEL: AR-5516
AR-5520
AR-5516D
AR-5520D
DIGITAL MULTIFUNCTIONAL SYSTEM
OPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals 
						

							Downloaded From ManualsPrinter.com Manuals 
						

							1
CONTENTS
1BEFORE USING THE MACHINE
PART NAMES AND FUNCTIONS ..................... 4
●OPERATION PANEL ........................................6
POWER ON AND OFF....................................... 8
●POWER ON ......................................................8
●POWER OFF ....................................................8
LOADING PAPER.............................................. 9
●PAPER ..............................................................9
●LOADING PAPER...........................................10
●
CHANGING A TRAYS PAPER SIZE SETTING.... 12
OPERATION IN COPY, PRINTER, AND 
SCANNER MODES.......................................... 14
2COPY FUNCTIONS
NORMAL COPYING ........................................ 15
●MAKING A COPY DARKER OR LIGHTER ....18
●SELECTING THE TRAY .................................18
●SETTING THE NUMBER OF COPIES ...........19
REDUCTION/ENLARGEMENT/ZOOM............ 19
●AUTOMATIC RATIO SELECTION .................19
●MANUAL RATIO SELECTION........................20
●SELECTING THE VERTICAL AND 
HORIZONTAL COPY RATIOS SEPARATELY 
(XY ZOOM Copying) .......................................21
AUTOMATIC TWO-SIDED COPYING (AR-
5516D/AR-5520D) ............................................ 23
●IMAGE ROTATION IN DUPLEX COPYING ...25
TWO-SIDED COPYING USING THE BYPASS 
TRAY ................................................................ 26
DUAL PAGE COPYING ................................... 27
INTERRUPTING A COPY RUN (Interrupt 
Copying) .......................................................... 28
CONVENIENT COPY FUNCTIONS ................. 29
●ROTATING THE IMAGE 90 DEGREES 
(Rotation Copy) ...............................................29
●SORT COPY/GROUP COPY .........................29
●COPYING MULTIPLE ORIGINALS ONTO A 
SINGLE SHEET OF PAPER (2 IN 1 / 4 IN 1 
Copy) ..............................................................31
●CREATING MARGINS WHEN COPYING 
(Margin Shift) ..................................................33
●ERASING SHADOWS AROUND THE EDGES 
OF A COPY (Erase Copy) ..............................34
3PRINTER FUNCTIONS
BASIC PRINTING ............................................ 35
●OPENING THE PRINTER DRIVER FROM THE 
Start BUTTON ............................................. 36
PRINTER DRIVER SETTING SCREEN .......... 37
SETTING ADVANCED PRINT FUNCTIONS... 38
●PRINTING MULTIPLE PAGES ON ONE PAGE 
(N-Up Printing) ............................................... 38
●FITTING THE PRINTED IMAGE TO THE 
PAPER (Fit To Paper Size) ............................ 39
●ROTATING THE PRINT IMAGE 180 DEGREES 
(Rotate 180 degrees) ..................................... 39
●ENLARGING/REDUCING THE PRINT IMAGE 
(Zoom) ........................................................... 40
●PRINTING FAINT TEXT AND LINES IN BLACK 
(Text To Black/Vector To Black) .................... 40
●ADJUSTING THE BRIGHTNESS AND 
CONTRAST OF THE IMAGE (Image 
Adjustment) .................................................... 41
●
ADDING A WATERMARK TO PRINTED PAGES 
(Watermark) ..................................................... 41
●TWO-SIDED PRINTING (AR-5516D/AR-5520D).... 42
SAVING FREQUENTLY USED PRINT 
SETTINGS ....................................................... 43
●SAVING SETTINGS AT THE TIME OF 
PRINTING (User Settings) ............................. 43
OUTLINE OF THE PRINT STATUS WINDOW .... 44
4SCANNER FUNCTIONS
SCANNING OVERVIEW .................................. 45
SCANNING USING THE KEYS ON THE 
MACHINE......................................................... 46
●OUTLINE OF BUTTON MANAGER............... 47
●BUTTON MANAGER SETTINGS .................. 48
SCANNING FROM YOUR COMPUTER.......... 49
●SCANNING FROM A TWAIN-COMPLIANT 
APPLICATION .................................................. 49
●SCANNING FROM A WIA-COMPLIANT 
APPLICATION (Windows XP/Vista)............... 53
●SCANNING FROM THE Scanner and Camera 
Wizard (Windows XP) ................................... 54
Downloaded From ManualsPrinter.com Manuals 
						

							2
5USER SETTINGS
ADJUSTING THE AUTOMATIC EXPOSURE 
LEVEL .............................................................. 55
CUSTOMISING SETTINGS (System Settings)...... 56
●SYSTEM SETTINGS ......................................56
●SELECTING A SETTING FOR A SYSTEM 
SETTING ........................................................59
SETTINGS FOR AUDITING MODE ................. 60
●AUDITING MODE ...........................................60
●AUDITING MODE SETTINGS ........................60
●
SELECTING AUDITING MODE SETTINGS......61
6TROUBLESHOOTING
TROUBLESHOOTING ..................................... 64
●MACHINE/COPYING PROBLEMS .................65
●PRINTING AND SCANNING PROBLEMS .....68
INDICATORS AND DISPLAY MESSAGES .... 72
MISFEED REMOVAL....................................... 73
●MISFEED IN THE SPF/RSPF.........................73
●MISFEED IN THE BYPASS TRAY .................74
●MISFEED IN THE MACHINE..........................75
●MISFEED IN THE UPPER PAPER TRAY ......78
●MISFEED IN THE LOWER PAPER TRAY .....79
REPLACING THE TONER CARTRIDGE ........ 80
7ROUTINE MAINTENANCE
CHECKING THE TOTAL OUTPUT COUNT AND 
TONER LEVEL ................................................ 81
●CHECKING THE TOTAL OUTPUT COUNT...81
●CHECKING THE TONER LEVEL ...................82
ROUTINE MAINTENANCE .............................. 83
●CLEANING THE DOCUMENT GLASS AND 
SPF/RSPF/DOCUMENT COVER ...................83
●
CLEANING THE ORIGINAL SCANNING GLASS 
(ONLY WHEN AN SPF/RSPF IS INSTALLED) ... 83
●CLEANING THE BYPASS TRAY PAPER FEED 
ROLLER..........................................................84
●CLEANING THE TRANSFER CHARGER ......84
8PERIPHERAL DEVICES AND SUPPLIES
PERIPHERAL DEVICES ................................. 85
●SINGLE PASS FEEDER/REVERSING SINGLE 
PASS FEEDER .............................................. 86
●250-SHEET PAPER FEED UNIT/2 X 250-
SHEET PAPER FEED UNIT.......................... 86
STORAGE OF SUPPLIES ............................... 87
●PROPER STORAGE ..................................... 87
Downloaded From ManualsPrinter.com Manuals 
						

							3
INTRODUCTION
This manual describes the copier, printer, and scanner functions of the AR-5516/AR-5520 and 
AR-5516D/AR-5520D digital multifunctional system.
• Where AR-XXXX appears in this manual, please substitute the name of your model for XXXX. For the name 
of your model, see DIFFERENCES BETWEEN MODELS in the Start Guide.
 The screen images and procedures that appear in this manual are mainly for Windows Vista. With other 
versions of Windows, some screen images may be different from those in this manual.
 For information on using your operating system, refer to your operating systems manual or online Help.
The display screens, messages, and key names shown in the manual may differ from those on the actual machine 
due to product improvements and modifications.
Note
Downloaded From ManualsPrinter.com Manuals 
						

							4
1
Chapter 1
BEFORE USING THE MACHINE
This chapter contains basic information that should be read before using the machine.
PART NAMES AND FUNCTIONS
Glass cleaner (when the SPF/RSPF is installed)
Use to clean the original scanning glass. (p.83)
Document feeder cover (when the SPF/RSPF is 
installed) /document cover
Open to make copies from the document glass. 
(p.15)
Document glass
Place an original that you wish to scan face down 
here. (p.15)
Handles
Use to move the machine.
Power switch
Press to turn the machine power on and off. (p.8)
Operation panel
Contains operation keys and indicator lights. (p.6, p.7)
Paper output tray
Copies and prints are deposited to this tray.
Front cover
Open to remove paper misfeeds and perform 
machine maintenance. (p.75, p.76, p.80)Paper trays
Each tray holds 250 sheets of paper. (p.10)
Side cover
Open to remove paper misfeeds and perform 
machine maintenance.
 (p.74, p.75)
Side cover handle
Pull to open the side cover. (p.74)
Bypass tray guides
Adjust to the width of the paper. (p.11)
Bypass tray
Paper including special paper (such as transparency 
film) can be fed from the bypass tray. (p.11
, p.26)
Bypass tray extension
Pull out when feeding large paper such as B4 and 
A3. (p.11)
Charger cleaner
Use to clean the transfer charger. (p.84)
USB 2.0 connector
Connect to your computer to use the printer and 
scanner functions. (Start Guide)
15
16
9
67
8
2
3
5
4
1
1314
10
11
12
4
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Downloaded From ManualsPrinter.com Manuals 
						

							5
BEFORE USING THE MACHINE
1
Document feeder tray (when the SPF/RSPF is 
installed)
Place the original(s) that you wish to scan face up 
here. Holds up to 40 originals. (p.17)
Original guides (when the SPF/RSPF is 
installed)
Adjust to the size of the originals. (p.16)
Feeding roller cover (when the SPF/RSPF is 
installed)
Open to remove misfed originals. (p.73)
Right side cover (when the SPF/RSPF is 
installed)
Open to remove misfed originals. (p.73)
Exit area (when the SPF/RSPF is installed)
Originals exit the machine here after copying. 
Toner cartridge lock release lever
To replace the toner cartridge, pull out the toner 
cartridge while pushing on this lever. (p.80)
Toner cartridge
Contains toner. (p.80)
Roller rotating knob
Turn to remove misfed paper. (p.75, p.76)Fusing unit release levers
To remove a paper misfeed from the fusing unit, push 
down on these levers and remove the paper. 
(p.76)
Photoconductive drum
Copy images are formed on the photoconductive 
drum.
Fusing unit paper guide
Open to remove misfed paper. (p.77)
1917
22
23
2120
2425
18
2726
17
18
19
20
21
22
23
24
The fusing unit is hot. Do not touch 
the fusing unit when removing misfed 
paper. Doing so may cause a burn or 
injury.
The model name can be seen on the machines 
front cover.
25
Warning
26
27
Note
Downloaded From ManualsPrinter.com Manuals 
						

							6
BEFORE USING THE MACHINE
OPERATION PANEL
SCAN MENU key
Use to scan by means of the provided Button 
Manager software. (p.48)
SCAN key ( ) / indicator
Press to switch the machine to scanner mode and 
scan by means of the provided Button Manager 
software. (p.46) The indicator blinks during 
scanning and transmission of the scanned data.
ON LINE key ( ) / indicator
Press to toggle the machine between online and 
off-line. The indicator lights up when the machine 
is online, and goes off when the machine is 
off-line. The indicator blinks while the machine is 
receiving print data and while printing is paused. 
(p.35)
ORIGINAL TO COPY key / indicators 
(AR-5516D/AR-5520D)
Press to select one-sided and two-sided copy 
modes. (p.24)
Two-sided copies from one-sided originals.
Two-sided copies from two-sided originals.
One-sided copies from two-sided originals.
XY-ZOOM key ( ) / indicator
Press to change the horizontal and vertical copy 
ratios independently. (p.21)
DUAL PAGE COPY key ( ) / indicator
Use to make individual copies of the two pages of 
an open book or other two-page original. (p.27)
ERASE key ( / ) / indicators 
Press to select the EDGE ERASE, CENTRE 
ERASE or EDGE + CENTRE ERASE mode. (p.34)
ORIGINAL DATA indicator ( ) 
Blinks when the memory becomes full of scanned 
original image data. (p.30, p.32)SORT/GROUP key ( / ) / indicators 
Press to select the SORT or GROUP mode. (p.29)
2 IN 1 / 4 IN 1 key (/) / indicators 
Press to select the 2 IN 1 or 4 IN 1 mode. (p.31)
MARGIN SHIFT key ( ) / indicator 
Shifts text or image on the copy to leave a binding 
margin on the edge of the copy. (p.33)
AUTO/TEXT/PHOTO key ( / / ) / 
indicators
Use to select the exposure mode: 
AUTO, TEXT, or PHOTO. (p.18)
ORIGINAL key ( ) / ORIGINAL SIZE 
indicators
Use to enter the original size. (p.12) The selected 
original size will light up.
PAPER SIZE indicators
Light up to show the selected copy paper size. (p.12)
Paper feed location / misfeed location 
indicators
The selected paper feed location is shown by a lit 
indicator ( ). (p.15)
The general location of misfed paper is shown by a 
blinking red indicator ( ). (p.73)
Alarm indicators
[ ] Maintenance indicator (p.72)
[ ] Toner cartridge replacement required 
indicator (p.72)
[ ] Developer replacement required indicator 
(p.72)
[ ] Paper required indicator (p.72)
[ ] Misfeed indicator (p.72)
1
2
3
4
5
6
7
8D ATA
9
10
11
12AUTO
13
14
15
16
9102345678111
Downloaded From ManualsPrinter.com Manuals 
						

							7
BEFORE USING THE MACHINE
1
Display
Shows the set number of copies, as well as the copy 
ratio, system setting function or setting code, or an 
error code when an error occurs.
Numeric keys
Use to select the desired copy quantity or to make 
system setting entries. (p.19)
To display the total number of pages output by the 
machine, hold the [0] key down. (p.81)
CLEAR key ( )
Clears the copy quantity display or terminates a 
copy run.
INTERRUPT key ( ) / indicator
Interrupts a copy run. (p.28)
Light and Dark keys (, ) / indicators
Use to adjust the TEXT or PHOTO exposure level. 
(p.18)
PAPER SELECT key ( )
Use to set the paper size in the paper trays. (p.12, 
p.18)
AUTO PAPER SELECT indicator ( )
Paper of the proper size will be automatically 
selected depending on the original size and 
selected copy ratio when this indicator is on. (p.17)
TRAY SETTING key ( )
Use to manually select a paper tray. (p.12)
AUTO IMAGE key ( ) / indicator
Press for automatic copy ratio selection. (p.19)
SPF/RSPF indicator (when the SPF/RSPF is 
installed)
Lights up when originals are set in the document 
feeder tray. (p.16)PRESET RATIO selector keys (, ) / 
indicators
Use to select preset reduction/enlargement copy 
ratios. (p.20)
Zoom keys (, )
Use to select any reduction or enlargement copy ratio 
from 25% to 400% in increments of 1%. (p.21)
Copy ratio display key ( )
Hold down when the machine is not in use to 
display the copy ratio in the display. (p.21)
ZOOM indicator 
Lights up when a zoom ratio is set. (p.21)
Audit clear key ( ) ( )
Closes an open account. (p.63)
READ-END key ( )
Use to check the total number of copies made. 
(p.81)
When copying in sort mode and 2 in 1/4 in 1 from the 
document glass, press this key when you have 
finished scanning the original pages and are ready to 
start copying. (p.30, p.31)
CLEAR ALL key ( )
Clears all selected settings and returns the 
machine to the initial settings. (p.8)
POWER SAVE indicator ( )
Lights up when the machine is in a power save mode. 
(p.8)
START key ( ) / indicator
Press to make a copy (p.15). Also press to exit 
Auto power shut-off mode and to set a system 
setting. Copying is possible when the indicator is 
on.
17
18
19
20
21
22
23AUTO
24
25AUTO
%
26
27
28
29
30
31ACC.#-C
32
33
34
35
121314151617181920
2122
23
242526272829303135343332
When there are two or more paper trays
Downloaded From ManualsPrinter.com Manuals 
						

							8
POWER ON AND OFF
The power switch is located on the left side of the machine.
POWER ON
Turn the power switch to the ON 
position.
It will take about 45 
seconds for the machine 
to warm up. While the 
machine is warming up, 
the POWER SAVE 
indicator ( ) will blink. 
(The POWER SAVE 
indicator ( ) will go off 
when the machine is 
ready to copy.)
However, you can make desired settings and press 
the [START] key ( ) during warm-up. Copying will 
start after warm-up.
POWER OFF
Make sure that the machine is not in 
operation and then turn the power switch 
to the OFF position.
If the power switch is 
turned off while the 
machine is in operation, 
a misfeed may occur and 
the job that was in 
progress will be 
cancelled.
Check the following to make sure the machine is not in 
operation:
 The START indicator is lit. (Initial state)
 The POWER SAVE indicator ( ) is lit. (Preheat 
mode or Auto power shut-off mode)
Power save modes
The machine has two power save modes to reduce overall power consumption thereby reducing the cost of 
operation. In addition, these modes conserve natural resources and help reduce environmental pollution. The two 
power save modes are Preheat mode and Auto power shut-off mode.
Preheat mode
This function automatically switches the machine to a low power consumption state if the set duration of time 
elapses without the machine being used when the power is on. The POWER SAVE indicator ( ) lights up, 
however, the keys on the operation panel can be used. Normal operation automatically resumes when a key on the 
operation panel is pressed, an original is placed, or a print job is received.
Auto power shut-off mode
This function automatically switches the machine to a state that consumes even less power than preheat mode if the 
set duration of time elapses without the machine being used when the power is on. All lights except the POWER 
SAVE indicator ( ) and ON LINE indicator go off. To resume normal operation, press the [START] key ( ). 
Normal operation also resumes automatically when a print job is received. While in auto power shut-off mode, no 
keys (except the [START] key ( )) can be used.
 The machine reverts to the initial settings when it is first turned on, when the [CLEAR ALL] key ( ) is pressed, 
or when no keys are pressed for the preset Auto clear time following the end of a copy job. When the machine 
reverts to the initial settings, all settings and functions selected to that point are cancelled. The Auto clear time 
can be changed in the user settings. (p.56)
 The machine is initially set to automatically enter power save mode if not used for copying or printing, for a 
preset period of time. This setting can be changed in the system settings. (p.56)
The preheat activation time and the Auto power shut-off timer can be changed using system settings. It is 
suggested that you set times that are appropriate for your usage of the machine. (p.56)
Note
Note
Initial settings
The machine assumes the initial settings when it is first turned on, when the [CLEAR ALL] key ( ) is pressed, 
and approximately one minute after the last copy is made in any mode.
Copy ratio: 100%, Exposure: Automatic
Copy quantity: 0, All special copier modes: Off
Auto paper selection: On, Paper feed station: The tray selected in the Default tray setting in the system settings. (p.58)
Downloaded From ManualsPrinter.com Manuals