Sharp AR 5320D User Manual

19
COPY FUNCTIONS
2
Copying from the SPF
1Make sure that an original has not 
been left on the document glass. 
Close the SPF.
2Adjust the original guides to the size 
of the original(s).
3Set the original(s) face up in the 
document feeder tray.
Insert the original into the document feeder tray as 
far as it will go. When the original is set, the SPF 
indicator will light up.
The ORIGINAL SIZE indicator corresponding to the 
size of the original lights up.

If the ORIGINAL SIZE indicator is blinking,...

20
COPY FUNCTIONS
Auto paper select mode (Two-tray model only)
When the AUTO PAPER SELECT indicator ( ) lights up, Auto paper select mode is enabled. This function 
automatically selects the paper that is the same size as the original A5, A4, A4R, B4, A3 (5-1/2 x 8-1/2, 8-1/2 x 
11, 8-1/2 x 11R, 8-1/2 x 13, 8-1/2 x 14 and 11 x 17) paper. Auto paper select mode can be disabled in the 
user programs. (p.33)
The sizes of paper that can be loaded vary by country and region.
If a zoom setting is selected...

21
COPY FUNCTIONS
2
MAKING A COPY DARKER OR LIGHTER
Automatic exposure adjustment is initially enabled. This function automatically adjusts the copy image according to 
the original being copied. If you wish to select the exposure level yourself, follow the steps below. (Select from two 
original types and five exposure levels for each original type.) The exposure level used in automatic exposure 
adjustment can also be changed. (ADJUSTING THE AUTOMATIC EXPOSURE LEVEL (p.31) )
Original types
AUTO...

22
COPY FUNCTIONS
SETTING THE NUMBER OF COPIES
Press the numeric keys to set the number of copies.
The set number of copies appears in the display. A 
maximum of 999 copies (factory default setting) 
can be set.
If you wish to make only a single copy, copying is 
possible with the display showing 0.
Important note when making a large number 
of copies
The maximum number of copies can be changed in 
the user programs. (p.34)
When the maximum number of pages (about 250 
pages) that can be held in the...

23
COPY FUNCTIONS
2
4Press the [AUTO IMAGE] key ( ).
The AUTO IMAGE 
indicator ( ) lights 
up and the appropriate 
ratio for the original size 
and paper size is 
selected. (The indicator 
of the selected ratio will 
light up.)
5Set the number of copies and other 
copy settings, and then press the 
[START] key ( ).
The copy will be delivered to the paper output 
tray.
MANUAL RATIO SELECTION
Copies can be reduced down to 25% or enlarged up to 400%. The [PRESET RATIO] selector keys ( ,  ) can be 
pressed...

24
COPY FUNCTIONS
SELECTING THE VERTICAL AND HORIZONTAL 
COPY RATIOS SEPARATELY
(XY ZOOM copying)
The XY ZOOM feature allows the horizontal and vertical copy ratios to be changed independently.
Example: Reduction only in the horizontal direction.
Ratios that can be selected will vary depending on the position of the original.
1Place the original(s) in the document 
feeder tray or on the document glass.
2If the original is placed on the 
document glass, select the original 
size. (p.18)
3Press the...

25
COPY FUNCTIONS
2
6Use the [PRESET RATIO] selector 
keys ( ,  ) and [Zoom] keys ( ,  ) 
to change the copy ratio in the 
horizontal direction.
Press the [PRESET RATIO] selector keys ( , 
) to select a ratio close to the desired ratio, and 
then press the [Zoom] keys ( ,  ) to adjust 
the ratio in increments of 1%.
The ratio appears in the display.
7Press the [Copy ratio display] key 
().
The selected ratio for the horizontal direction will 
be entered and the display will change to the 
number of...

26
TWO-SIDED COPYING USING THE 
BYPASS TRAY
To perform manual two-sided copying, follow these steps.
Example: Copying originals A and B onto each side of one sheet of paper
1Copy original A.
2Place original B as shown below.
Vertically-oriented 
original:
If the original is oriented 
vertically, place it in the 
same orientation as 
original A.
Horizontally-oriented 
original:
If the original is oriented 
horizontally, place it with 
the top and bottom and 
left and right sides 
reversed with respect to...

27
2
DUAL PAGE COPYING
A dual page original can be automatically separated into two pages during copying. This feature is convenient for 
making copies of books and other dual page originals on individual sheets of paper.
1Place the original on the document 
glass, aligning the division between 
the pages with the size marker ( A4 
(8
1/2)). Close the document cover  
SPF.
Copying will begin from 
the page to the right of 
the size marker.
2Set the original size to A3 (11 x 17).
3Press the [DUAL PAGE...

28
INTERRUPTING A COPY RUN
(Interrupt copying)
A copy run can be temporarily interrupted to allow another copy job to be performed. When the other job is finished, 
the copy run will resume using the original copy settings.
1Press the [INTERRUPT] key ( ) to 
interrupt the copy run.
The INTERRUPT 
indicator will light up and 
the machine will revert to 
the initial settings. (p.12) 
The INTERRUPT 
indicator will blink until 
the current copy run 
stops.
2Remove the previous original(s) and 
place the...