Sega Harley Davidson Std Type Service Manual

8
“CHECK SIDE” Display
FILTER BOARD CARTON BOX
601-8928 (1)
Used for transporting the GAME BOARD.
{SUPPLIED WITH YOUR GAME}
 DO NOT SHIP GAME BOARD WITHOUT
THIS BOX AS IT MAY DAMAGE THE GAME
BOARD AND VOID YOUR WARRANTY.
!!NEVER SHIP MODEL 3 GAME BOARDS !!NEVER SHIP MODEL 3 GAME BOARDS
OUTSIDE OF CAGE!! OUTSIDE OF CAGE!!
THE SHIPMENT METHOD DESCRIBED BELOW ONLY
APPLIES TO ‘MODEL 3’ BOARDS CONTAINED IN THE
FOLLOWING GAMES:
NO OTHER GAMES BOARDS ARE TO BE SHIPPED IN THE CAGE AS
THEY MAY BE DAMAGED BEYOND...

9
4 . ASSEMBLING AND INSTALLATION
Note that the tools such as a phillips screwdriver and wrench for M16 hexagon bolt w/24 mm width
across flats are required for the assembly work.When carrying out the assembly work, follow the procedure in the following 7-item sequence:
ASSY OFCABINET
SECURING IN PLACE (ADJUSTER ADJUSTMENT)
POWER SUPPLY
ASSEMBLING CHECK
Assembling should be performed as per this manual. Since this is a
complex machine, erroneous assembling may cause damage to the
machine, or...

10 Tightly fit the seat cabi to the cabinet in a manner to insert it in.
Secure to the cabinet with 2 hexagon bolts and 2 truss screws.
Connect the connector. (2P white)
Install the joint lid.
Secure the Joint lid with 4 screws.
1
2
3
4
5 

11  SECURING IN PLACE (ADJUSTER ADJUSTMENT)
Move the machine to the installation position.
Cause all of the leg adjusters to make contact
with the floor. By using a wrench, make
adjustments in the height of the leg adjusters to
ensure that the machines position is level.
After making adjustments, fasten the leg
adjuster nut upward and secure the height of the
leg adjuster. This machine has 8 each of casters and adjusters (shown below). When the installation position is determined, cause
the adjusters to...

12
POWER SUPPLY
Ensure that the Main SW is OFF.
3
1
The AC unit is mounted on the rear side of the cabinet . The AC Unit incorporates the Main SW, Earth Terminal and
Inlet. Firmly insert the Power Plug into the Socket Outlet and the other side of the plug to the Inlet. Turn the Main SW
ON to turn power ON.
Ensure that the power cord is not exposed on the surface (passage,
etc.). If exposed, they can be caught and are susceptible to damage.
If damaged, the cord can cause an electric shock or short...

13
Selecting the INPUT TEST on the menu screen in the test
mode to display the screen  on which each SW and Volume is
tested. Press each switch. (To check the Coin SW, insert a
Coin from the inlet with the Coin Chute Door being opened.)
If the display beside each switch is ON, the switch and wiring
connection are satisfactory. Check the display of each Volume
value. The Volume could have an irregularity caused by
differences between machines and vibration during transporta-
tion. Set the Volume values by...

14
12345678901234567890123456789
12345678901234567890123456789
12345678901234567890123456789
12345678901234567890123456789
12345678901234567890123456789
12345678901234567890123456789
12345678901234567890123456789
12345678901234567890123456789
123456789012345678901234567890121234567
123456789012345678901234567890121234567
123456789012345678901234567890121234567
123456789012345678901234567890121234567
123456789012345678901234567890121234567
123456789012345678901234567890121234567...

15 When moving the machine, be sure to pull out the plug from
the power supply. Moving the machine with the plug as is
inserted can damage the power cord and cause a fire or elec-
tric shock.
When moving the machine on the floor, retract the Adjusters
and ensure that Casters make contact with the floor. During
transportation, pay careful attention so that Casters do not
tread power cords. Damaging the power cords can cause an
electric shock and/or short circuit.
When lifting the cabinet, be sure to hold...

16
6 . CONTENTS OF GAME
The following are operations and responses obtained when the machine functions satisfactorily. Any functioning
different fromt he following may have been caused by a certain fault. Immediately investigate and eliminate the cause
of the malfunctioning to ensure satisfacory operation. The explanation herein mainly refer to the case where the game
machine is used independently. In communications play, some points may differ fromthe following explanations.
When energized, the...

17
Be seated.
Insert coin(s). When one play worth of coin(s) is inserted, the Select mode appears.
Select in order of BIKE and TRANSMISSION. Turn the handlebar to select and turn the ACCELORATOR GRIP
to decide.
When the Select Mode is displayed, countdown starts. At count 0, BIKE TRANSMISSION being selected are
automatically decided.
When TRANSMISSION is decided, the race starts. The checkpoint (desination) is displayed on the screen, and
Time Limit countdown starts.
At the same time the race starts, the...