Schwinn S 25 Manual

							130 /1.0
170 /1.5
ASSEMBLY MANUAL / OWNER’S MANUAL  
Manual en Espa\361ol Latino Americano:
http://www  
						

							2
Important Safety Instructions - Assembly 3
  Safety Warning Labels / Serial Number  4
Specifications 5
Before Assembly  5
Parts 6
Hardware 7
Tools 7
Assembly 8
Leveling the Bike  14
Moving the Bike  14Important Safety Instructions - Owner’s 
15
Features 16
  Console Features  17
  Remote Heart Rate Monitor  20
Operations 22
 Adjustments  22
  Initial Setup  22
  Quick Start / Manual Program  23
  User Profiles  23
  Profile Programs  25
  Pausing or Stopping  28
 Results  28
  GOAL TRACK Statistics  28
Console Setup Mode  30
Maintenance 31
Troubleshooting 33
Warranty 35
Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369, 
[email protected] | outside U.S. +01-360-859-5180, [email protected]\
m | © 2013 Nautilus, Inc.
Table of ConTenTs
To validate warranty support, keep the original proof of purchase and record the following information:
Serial Number __________________________
Date of Purchase ____________________
To register your product warranty , go to: www.SchwinnFitness.com/register
Or call 1 (800) 605–3369.
If you have questions or problems with your product, please call 1 (800) NAUTILUS (628–8458)
Or go to: www.SchwinnFitness.com  
						

							3
ImporTanT safeTy InsTruCTIons 
— assembly
!This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Obey the following warnings:
!Read and understand all warnings on this machine.
Carefully read and understand the Assembly instructions.
•	 Keep	bystanders	and	children	away	from	the	product	you	are	assembling	at	all	times.
•	 Do	not	connect	power	supply	to	the	machine	until	instructed	to	do	so.
•	 Do	not	assemble	this	machine	outdoors	or	in	a	wet	or	moist	location.
•	 Make	sure	assembly	is	done	in	an	appropriate	work	space	away	from	foot	traffic	and	exposure	to	bystanders.
•	 Some	components	of	the	machine	can	be	heavy	or	awkward.	Use	a	second	person	when	doing	the	assembly	steps	 involving	these	parts.	Do	not	do	steps	that	involve	heavy	lifting	or	awkward	movements	on	your	own.
•	 Set	up	this	machine	on	a	solid,	level,	horizontal	surface.
•	 Do	not	try	to	change	the	design	or	functionality	of	this	machine.	This	could	compromise	the	safety	of	this	machine	 and will void the warranty.
•	 If	replacement	parts	are	necessary,	use	only	genuine	Nautilus
® replacement parts and hardware. Failure to use 
genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the 
warranty.
•	 Do	not	use	until	the	machine	has	been	fully	assembled	and	inspected	for	correct	performance	in	accordance	with	the	 Manual.
•	 Read	and	understand	the	complete	Manual	supplied	with	this	machine	before	first	use.	Keep	the	Manual	for	future	 reference.
•	 Do	all	assembly	steps	in	the	sequence	given.	Incorrect	assembly	can	lead	to	injury	or	incorrect	function.
•	 This	product	contains	magnets.	Magnetic	fields	can	interfere	with	the	normal	use	of	certain	medical	devices	at	a	close	 range.	 Users	may	come	 into	proximity	 of	the	 magnets	 in	the	 assembly,	 maintenance,	 and/or	use	of	the	 product.	 Given	
the obvious importance of these devices, such as a pacemaker, it is important that you consult with your medical 
provider in connection with the use of this equipment. Please consult the \
“Safety Warning Labels and Serial Number” 
section to determine the location of the magnets on this product.  
						

							4
safeTy WarnIng labels and serIal number
FCC Compliance
!Changes	or	modifications	to	this	unit	not	expressly	approved	by	the	party	responsible	for	compliance	could	void	
the user’s authority to operate the equipment.
The machine and power supply comply with part 15 of the FCC rules. Opera\
tion is subject to the following two 
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation.
Note:    This machine and power supply have been tested and found to comply with \
the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment generates, uses and can radiate \
radio frequency 
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio 
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does\
 cause 
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the 
user is encouraged to try to correct the interference by one or more of the following measures:
•		Reorient	or	relocate	the	receiving	antenna.
•		Increase	the	separation	between	the	equipment	and	receiver.
•			 Connect	the	equipment	into	an	outlet	on	a	circuit	different	from	that	to	which	the	receiver	is	connected.
•			 Consult	the	dealer	or	an	experienced	radio/TV	technician	for	help.
•  Lisez  et assimilez tous l es aver tisse ment s  
  app osés sur  cet appareil.
•   G ardez  les enfants et le s animaux de   
  compagnie  éloigné s de cette  m achin e e n   
  to ut  te m ps
•   D éco nseillé a ux enf ants â gés de    
  moi ns d e 1 4  ans.
•   Lis ez et  famil iar isez -v o u s av ec l e  Man uel   
  du  propriétaire  et ave c t o us  les     
  av ertissem en ts  ava n t d ’u til iser  ce tte   
  m ach in e.
•   S oyez  prud en t l o rs q ue v o u s ut ilisez cet   
  équipement pour ne pas v ous infliger de  
  graves  bless u res .
•   C ett e  mac hine  sup porte  un  poids    
  m ax im al d e 3 00lbs.  (1 3 6kg ).
•   R em pla cez  t o u te  étiqu ett e     
  d’a ver tissement  endommag ée, illisib le  
  ou  m anqu ante.
•  La fréquence cardiaque qui s ’affiche  
  sur la console peut être inexact et  
  doit être utilisée seulement à titre  
  indicatif .
•  R ead, under stand and obey all    
  warnings on this mac hine.
•  Keep c hildren aw ay.
•  Not intended for use by an yone  
  under 1 4 years of age.
•  Prior to use, read and under stand  
  the Owner ’s Manual.
•  Injury or death is possible if    
  Caution is not used while using this  
  mac hine.
•  The maximum user weight for this  
  mac hine is 30 0 lbs (136 kg).
•  Replace an y “Caution ”,   “W arning”  
  or  “Danger” label that is illegible,  
  damaged, or remo ved.
•  The hear t rate displayed may be  
  inaccurate and should be used for  
  reference only .
80 02739 _A
Serial number
Product 
specification  
						

							5
speCIfICaTIons
41.3” (105cm)
21.4” (54cm)55.6” (141cm)
Before Assembly 
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a 
hard,	level	surface.	Allow	a	workout	area	of	a	minimum	90”	x	70”	(2.3m	x	1.8m).
Basic Assembly Tips
Follow these basic points when you assemble your machine:
1.   
Read and understand the “Important Safety Instructions” before assembly.
2.    Collect all the pieces necessary for each assembly step.
3.    Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left\
 (counter -
clockwise) to loosen, unless instructed otherwise.
4.    When attaching 2 pieces, gently lift and look through the bolt holes to help insert the bolt through the holes.
5.  The assembly can require 2 people. Maximum User Weight:   300 lbs. (136 kg)
Power Requirements: 
	 Operational	Voltage:		 9VDC
  Operating Current:  1.5A
Regulatory Approvals:
  ISO 20957
	 	 AC	Power	Adapter:	 UL	listed,	Rated	120V	60Hz	Input,	
9VDC,	1500mA	Output.	Class	2.
!  This product, its packaging, and components contain 
chemicals known to the State of California to cause 
cancer, birth defects, or reproductive harm. This Notice 
is provided in accordance with California’s Proposition 
65. If you would like additional information, please refer 
to our website at www.nautilus.com/prop65.  
						

							6
parTs
ItemQtyDescription ItemQtyDescription
1 1Main Frame 91Seat Post
2 1Front Stabilizer 101Adjustment Knob
3 1Rear  Stabilizer 111Seat
4 1Top Shroud 121Left Pedal (L)
5 1Mast Gasket 131Right Pedal (R)
6 1Console Mast (with Handlebar Mount)  141Water Bottle Holder
7 1Handlebars 151AC Adapter
8 1Console 161Handlebar Mount Cover
  Note:   Media Cable is in a bag.
12 (L) 13 (R)11
7
1
2 4
8
5
14
3
9
15
10
616  
						

							7
HardWare / Tools
To o l s
Included         Not Included
6 mm (recommended)
Item
QtyDescription
A 4Button	Head	Hex	Screw	M8	x	25
B 5Lock Washer M8
C 4Curved Washer M8
D 1Flat Washer M8
E 1T-handle
D E  
						

							8
assembly
1.  Attach Stabilizers to Main Frame
 
Note:   Hardware (*) is pre-installed on the stabilizers and not on Hardware Card. Make sure transport wheels on the 
front stabilizer point forward, and the Schwinn® decal on the rear stabilizer faces outward from the machine.
2.  Install Console Mast, Mast Gasket and Top Shroud on Main Assembly
 N OTI C E :    Make sure the Console Cable connector (a) does not fall into the Console Mast. Align the clips on the cable 
connectors	and	make	sure	the	connectors	lock.	Do	not	crimp	Console	Cable.	Be	sure	the	tabs	on	the	Top 	
Shroud snap into the Main Assembly.
X2X2
6 mm6 mm
*
*
* *
*
*
6
5 4
A
6 mmCB
X4
a  
						

							9
3. 
Install Handlebars on Console Mast
  N OTI C E : 			Do	not	crimp	the	cables.	Put	the	Handlebar	(7)	in	the	bracket	(6a),	adjust	the	Handlebar	to	the	desired	angle, 	
and install the T-handle (E) through the holes. Use the pull cable in the Handlebar Mount to route the HR 
cable (7a) through the slot (6c) under the Handlebar Mount to the top of the mast. Fully tighten the T-handle 
to keep the Handlebar in position. Push the cover (16) into position on the Handlebar Mount.
7
6a
16
E
6a
E
D
B
7
6a
D
B7a
E
7a
7 6c  
						

							10 4. Install Console on Console Mast 
 Note:    Remove the pre-installed screws (*) from the back of the Console before you connect the cables.
 N OTI C E :    Do	not	crimp	the	cables. 	
8
X4
#2
*
X4
#2
8
*