Schwinn Journey 25 Manual

11
4.  Attach Cover to Frame Assembly
4  

12 5.  Attach Seat Adjustment Handle to Frame Assembly
7  

13
6.  Connect the Cables and Attach the Console Mast to Frame Assembly
 NOTICE :
		Do	not	crimp	Console	Cables.
15
16
14
AJ
6mm
X4
D  

14 7.  Remove Hardware from Console
 NOTICE :		Do	not	crimp	the	cable.
  Note:   Hardware is pre-installed and not on the Hardware Card. *
*
X4
8.  Connect Cables and Attach Console to Frame Assembly
 NOTICE : 		Align	the	clips	on	the	cable	connectors	and	make	sure	the	connectors	lock.	Do	not	crimp cables.  
1
*
X4
#2  

15
9.  Attach Pedals to Frame Assembly
 NOTICE :
  The Left Pedal is reverse-threaded. 	Be	sure	to	attach	Pedals	on	the	proper	side	of	the	Bike.	Orientation
is	based	from	a	seated	position	on	the	bike.	The	Left	Pedal	has	an	“L”,	the	Right	Pedal	an	“R”.
13
11  

16 10.  Attach Water Bottle Holder to Frame Assembly
2
X2
F
#2  

17
11.  Connect AC Adapter to Frame Assembly
12.  Final Inspection
Inspect your machine to ensure that all hardware is tight and components\
 are properly assembled.
Be sure to record the serial number in the field provided at the front\
 of this manual.
Do not use until the machine has been fully assembled and inspected for correct per formance in accordance with the Owner’s 
Manual.
10  

18 Moving the Machine
The machine may be moved by one or more persons depending on their physical abilities and capacities. Make sure that you 
and others are all physically fit and able to move the machine safely.
1.    Remove the power cord.
2.	 	 Use	the	Transport	Handle	to	carefully	lift	the	machine	onto	the	transport	rollers.	
3.	 	
Push	the	machine	into	position.
4.	 	
Carefully	lower	the	machine	into	position.
NOTICE:    Be careful when you move the bike. All abrupt motions can affect the computer...

19
Leveling the Machine
Levelers	are	found	on	each	side	of	the	Rear	Stabilizer	and	on	the	Frame	Rail.	On	the	Rear	Stabilizer,	turn	the	knob	to	adjust	
the stabilizer foot. 
Do	not	adjust	the	levelers	to	such	a	height	that	they	detach	or	unscrew	from	the	machine.	Injury	to	you	or	damage	to	
the machine can occur.
To	adjust	the	leveler	on	the	Frame	Rail:
1.	 	 Loosen	the	upper	locking	nut.
2.    Turn the leveler to adjust the height.
Do not adjust the levelers to such a height that they detach or unscrew...

20
ImporTanT safeTy InsTruCTIons
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Before using this equipment, obey the following warnings:
Read	and	understand	the	complete	Manual.	Keep	the	Manual	for	future	reference.
	 Read	and	understand	all	warnings	on	this	machine.	If	at	any	time	the	Warning	stickers	become	loose,	unreadable	or	
dislodged,	contact	Nautilus
®	Customer	Service	for	replacement	stickers.
•	 Children	must	not	be	let	on	or...