Schwinn Journey 25 Manual

							11
4.  Attach Cover to Frame Assembly
4  
						

							12 5.  Attach Seat Adjustment Handle to Frame Assembly
7  
						

							13
6.  Connect the Cables and Attach the Console Mast to Frame Assembly
 NOTICE :
		Do	not	crimp	Console	Cables.
15
16
14
AJ
6mm
X4
D  
						

							14 7.  Remove Hardware from Console
 NOTICE :		Do	not	crimp	the	cable.
  Note:   Hardware is pre-installed and not on the Hardware Card. *
*
X4
8.  Connect Cables and Attach Console to Frame Assembly
 NOTICE : 		Align	the	clips	on	the	cable	connectors	and	make	sure	the	connectors	lock.	Do	not	crimp cables.  
1
*
X4
#2  
						

							15
9.  Attach Pedals to Frame Assembly
 NOTICE :
  The Left Pedal is reverse-threaded. 	Be	sure	to	attach	Pedals	on	the	proper	side	of	the	Bike.	Orientation
is	based	from	a	seated	position	on	the	bike.	The	Left	Pedal	has	an	“L”,	the	Right	Pedal	an	“R”.
13
11  
						

							16 10.  Attach Water Bottle Holder to Frame Assembly
2
X2
F
#2  
						

							17
11.  Connect AC Adapter to Frame Assembly
12.  Final Inspection
Inspect your machine to ensure that all hardware is tight and components\
 are properly assembled.
Be sure to record the serial number in the field provided at the front\
 of this manual.
Do not use until the machine has been fully assembled and inspected for correct per formance in accordance with the Owner’s 
Manual.
10  
						

							18 Moving the Machine
The machine may be moved by one or more persons depending on their physical abilities and capacities. Make sure that you 
and others are all physically fit and able to move the machine safely.
1.    Remove the power cord.
2.	 	 Use	the	Transport	Handle	to	carefully	lift	the	machine	onto	the	transport	rollers.	
3.	 	
Push	the	machine	into	position.
4.	 	
Carefully	lower	the	machine	into	position.
NOTICE:    Be careful when you move the bike. All abrupt motions can affect the computer operation.
before you sT arT  
						

							19
Leveling the Machine
Levelers	are	found	on	each	side	of	the	Rear	Stabilizer	and	on	the	Frame	Rail.	On	the	Rear	Stabilizer,	turn	the	knob	to	adjust	
the stabilizer foot. 
Do	not	adjust	the	levelers	to	such	a	height	that	they	detach	or	unscrew	from	the	machine.	Injury	to	you	or	damage	to	
the machine can occur.
To	adjust	the	leveler	on	the	Frame	Rail:
1.	 	 Loosen	the	upper	locking	nut.
2.    Turn the leveler to adjust the height.
Do not adjust the levelers to such a height that they detach or unscrew from the machine. Injury to you or 
damage to the machine can occur.
3.	 	 Tighten	the	upper	locking	nut	to	lock	the	leveler.
Make	sure	the	bike	is	level	and	stable	before	you	exercise.
X2  
						

							20
ImporTanT safeTy InsTruCTIons
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Before using this equipment, obey the following warnings:
Read	and	understand	the	complete	Manual.	Keep	the	Manual	for	future	reference.
	 Read	and	understand	all	warnings	on	this	machine.	If	at	any	time	the	Warning	stickers	become	loose,	unreadable	or	
dislodged,	contact	Nautilus
®	Customer	Service	for	replacement	stickers.
•	 Children	must	not	be	let	on	or	near	to	this	machine.	Moving	parts	and	other	features	of	the	machine	can	be	dangerous	to	 children.
•	 Not	intended	for	use	by	anyone	under	14	years	of	age.
•	 Consult	a	physician	before	you	start	an	exercise	program.	Stop	exercising	if	you	feel	pain	or	tightness	in	your	chest,	 become	short	of	breath,	or	feel	faint.	Contact	your	doctor	before	you	use	the	machine	again.	Use	the	values	calculated	or	
measured by the machine’s computer for reference purposes only.
•	 Before	each	use,	examine	this	machine	for	loose	parts	or	signs	of	wear.	Do	not	use	if	found	in	this	condition.	Monitor	the	 Seat,	Pedals,	and	Crank	Arms	closely.	Contact	Nautilus®	Customer	Service	for	repair	information.
•	 Maximum	user	weight	limit:	300	lbs.	(136	kg).	Do	not	use	if	you	are	over	this	weight.
•	 This	machine	is	for	home	use	only.
•	 Do	not	wear	loose	clothing	or	jewelry.	This	machine	contains	moving	parts.	Do	not	put	fingers	or	other	objects	into	 moving	parts	of	the	exercise	equipment.
•	 Set	up	and	operate	this	machine	on	a	solid,	level,	horizontal	surface.
•	 Make	the	Pedals	stable	before	you	step	on	them.	Use	caution	when	you	step	on	and	off	the	machine.
•	 Disconnect	all	power	before	servicing	this	machine.
•	 Do	not	operate	this	machine	outdoors	or	in	moist	or	wet	locations.	Keep	the	foot	pedals	clean	and	dry.
•	 Keep	at	least	24”	(0.6	m)	on	each	side	of	the	machine	clear.	This	is	the	recommended	safe	distance	for	access	and	 passage	around	and	emergency	dismounts	from	the	machine.	Keep	third	parties	out	of	this	space	when	machine	is	in	
use.
•	 Do	not	over	exert	yourself	during	exercise.	Operate	the	machine	in	the	manner	described	in	this	manual.
•	 Correctly	adjust	and	safely	engage	all	Positional	Adjustment	Devices.	Make	sure	that	the	Adjustment	Devices	do	not	hit	 the user.
•	 Exercise	on	this	machine	requires	coordination	and	balance.	Be	sure	to	anticipate	that	changes	in	speed	and	resistance	 level	can	occur	during	workouts,	and	be	attentive	in	order	to	avoid	loss	of	balance	and	possible	injury.