Schwinn Journey 25 Manual

270 /
230 /
430 /
470 /
2.5
ASSEMBLY MANUAL / OWNER’S MANUAL  
Manual en Espa\361ol Latino Americano:
http://www  

2
Important Safety Instructions - Assembly   3
  Safety Warning Labels / Serial Number    4
Specifications	 	 5
Before	 Assembly	 	 5
Parts   6
Hardware   7
Tools   7
Assembly   8
Moving the Machine   18
Leveling the Machine   19
Important Safety Instructions    20
Features   21
  Console Features   22 Operations 
27
 Adjustments  27
  Power Up / Idle Mode  27
  Quick Start Program  28
	 User	Profiles	 28
  Pausing or Stopping  33
  Results / Cool Down Mode  34
  GOAL TRACK Statistics  34
Console Service...

3
ImporTanT safeTy InsTruCTIons
-assembly
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Obey the following warnings:
Read and understand all warnings on this machine.
Carefully read and understand the Assembly instructions.
•	 Keep	bystanders	and	children	away	from	the	product	you	are	assembling	at	all	times.
•	 Do	not	connect	power	supply	to	the	machine	until	instructed	to	do	so.
•	 Do	not	assemble	this	machine	outdoors	or	in	a	wet	or...

4
safeTy WarnIng labels and serIal 
number
FCC Compliance
!Changes	or	modifications	to	this	unit	not	expressly	approved	by	the	party	responsible	for	compliance	could	void	the	
user’s	authority	to	operate	the	equipment.
The	machine	and	power	supply	comply	with	part	15	of	the	FCC	rules.	Operation	is	subject	to	the	following	two	conditions: 	
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including 
interference that may cause undesired...

5
speCIfICaTIons
Before Assembly 
Select	the	area	where	you	are	going	to	set	up	and	operate	your	machine.	For	safe	operation,	the	location	must	be	on	a	
hard,	level	surface.	Allow	a	workout	area	of	a	minimum	74.6”	x	110.5”	(189.5	cm	x	280.5	cm).
Basic Assembly Tips
Follow	these	basic	points	when	you	assemble	your	machine:
•	 Read	and	understand	the	“Important	Safety	Instructions”	before	assembly.
•	 Collect all the pieces necessary for each assembly step.
•	 Using	the	recommended	wrenches,	turn	the	bolts...

6
ItemQtyDescription ItemQtyDescription
1 1Console 101AC Adapter
2 1Water	Bottle	Holder 111Left	Pedal
3 1Seat	Back 121Front	Stabilizer
4 1Seat	Cover 131Right	Pedal
5 1Seat	Frame	Assembly 141Upper	Shroud
6 1Seat	Bottom 151Shroud	Cap
7 1Seat	Adjustment	Handle 161Console	Mast
8 1Rear	Stabilizer	 171MP3	Cord	
9 1Frame
parTs
4
1
2
5
16
6
1415
9
7
13
12
11
8
3
10
17  

7
ItemQtyDescription ItemQtyDescription
A 8Button	Head	Hex	Screw,	M8x20 F2Phillips	Head	Screw,	M5x12
B 10Button	Head	Hex	Screw,	M6x12 G14Lock	Washer,	M6
C 4Flat	Washer,	M8 H4Curved	Washer,	M6
D 8Lock	Washer,	M8 I4Phillips	Head	Screw,	M6x25
E 10Flat	Washer,	M6 J4Curved	Washer,	M8
HardW are / Tools
To o l s
Included      Not Included
(recommended)
4	mm
6	mm
A BC D EF
GHIJ  

8
assembly
1.  Attach Stabilizers to Frame
 Note:   Hardware is pre-installed and not on the Hardware Card. *
*
6mm
12
8
9
*
*
X2
*
6mm
**
X2  

9
2.  Attach the Seat Frame Assembly to the Seat Rail
 NOTICE :
		Do	not	crimp	the	Heart	Rate	Cable.	Once	all	hardware	has	been	inserted,	be	sure	to	fully	tighten	it.
A
C
D
6mmX4
B
E
G
4mm
X2
5  

10 3.  Attach Seat Pads to Seat Frame Assembly
3
6
X8
4mm
B
E
G
H
X4
#2
G
I