Sanyo Projector Plc Xu84 User Manual
Have a look at the manual Sanyo Projector Plc Xu84 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 63
63
Appendix
Some displays are not seen–Check the Display function. See page 46.
during the operation.
PIN code dialog box appears –PIN code lock is being set. Enter a PIN code (the “1234” or numbe\
rs
at start-up. you have set). See pages 21, 52–53.
Computer 2 cannot be selected.–Select Computer 2 at the Terminal function. (See page 49.)
The Terminal function cannot –The Terminal function cannot be selected after Computer 2 is
be selected. selected. Select other input source such as Computer 1 or...](http://img.usermanuals.tech/thumb/67/96077/w64_sanyo-plc-xu84-manual_d-62.png "Page 63
63
Appendix
Some displays are not seen–Check the Display function. See page 46.
during the operation.
PIN code dialog box appears –PIN code lock is being set. Enter a PIN code (the “1234” or numbe\
rs
at start-up. you have set). See pages 21, 52–53.
Computer 2 cannot be selected.–Select Computer 2 at the Terminal function. (See page 49.)
The Terminal function cannot –The Terminal function cannot be selected after Computer 2 is
be selected. selected. Select other input source such as Computer 1 or...")
![Page 66
66
AppendixCompatible Computer Specifications
Basically this projector can accept the signal from all computers with t\
he V-, H-Frequency mentioned
below and less than 140 MHz of Dot Clock for analog signal and 110 MHz o\
f Dot Clock for digital signal. When selecting these modes, PC adjustment can be limited.
ON-SCREEN
DISPLAYRESOLUTIONH-Freq.(KHz)V-Freq. (Hz)
VGA 1640 x 48031.4759.88
VGA 2720 x 40031.4770.09
VGA 3640 x 40031.4770.09
VGA 4640 x 48037.8674.38
VGA 5640 x 48037.8672.81
VGA 6640 x...](http://img.usermanuals.tech/thumb/67/96077/w64_sanyo-plc-xu84-manual_d-65.png "Page 66
66
AppendixCompatible Computer Specifications
Basically this projector can accept the signal from all computers with t\
he V-, H-Frequency mentioned
below and less than 140 MHz of Dot Clock for analog signal and 110 MHz o\
f Dot Clock for digital signal. When selecting these modes, PC adjustment can be limited.
ON-SCREEN
DISPLAYRESOLUTIONH-Freq.(KHz)V-Freq. (Hz)
VGA 1640 x 48031.4759.88
VGA 2720 x 40031.4770.09
VGA 3640 x 40031.4770.09
VGA 4640 x 48037.8674.38
VGA 5640 x 48037.8672.81
VGA 6640 x...")
![Page 69
69
Appendix
Model No.
COMPONENT-VGA Cable : POA-CA-COMPVGA
SCART-VGA Cable : POA-CA-SCART
VGA-Cable (10 m) : KA-MC-DB10
Ceiling Hanger :POA-CHS-US01 (for low ceiling)
POA-CHL-UL01 (for high ceiling)
POA-CHS-US02 (for low ceiling)
POA-CHL-UL02 (for high ceiling)
POA-CHB-XU70
USB Memory :POA-USB02
The parts listed below are optionally available. When ordering those par\
ts, specify the item name and Model
No. to the sales dealer.
Optional Parts
Accessories
Owner’s Manual (CD-ROM)
Quick Reference Guide...](http://img.usermanuals.tech/thumb/67/96077/w64_sanyo-plc-xu84-manual_d-68.png "Page 69
69
Appendix
Model No.
COMPONENT-VGA Cable : POA-CA-COMPVGA
SCART-VGA Cable : POA-CA-SCART
VGA-Cable (10 m) : KA-MC-DB10
Ceiling Hanger :POA-CHS-US01 (for low ceiling)
POA-CHL-UL01 (for high ceiling)
POA-CHS-US02 (for low ceiling)
POA-CHL-UL02 (for high ceiling)
POA-CHB-XU70
USB Memory :POA-USB02
The parts listed below are optionally available. When ordering those par\
ts, specify the item name and Model
No. to the sales dealer.
Optional Parts
Accessories
Owner’s Manual (CD-ROM)
Quick Reference Guide...")
![Page 70
70
Appendix
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japa\
n Business Machine and Information
System Industries Association). This projector supports all commands de\
fined by PJLink Class 1 and is verified
conformance with PJLink Standard Class 1.
For PJ Link password, see page 49 on the owner’s manual “Network S\
et-up and Operation.”
Projector Input
RGB
Computer1 (Analog)
RGB (AV HDCP)
RGB (PC digital)
Component
RGB (Scart)
Auto
PJLink Input
RGB 2
RGB 1
DIGITAL 2
DIGITAL 1...](http://img.usermanuals.tech/thumb/67/96077/w64_sanyo-plc-xu84-manual_d-69.png "Page 70
70
Appendix
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japa\
n Business Machine and Information
System Industries Association). This projector supports all commands de\
fined by PJLink Class 1 and is verified
conformance with PJLink Standard Class 1.
For PJ Link password, see page 49 on the owner’s manual “Network S\
et-up and Operation.”
Projector Input
RGB
Computer1 (Analog)
RGB (AV HDCP)
RGB (PC digital)
Component
RGB (Scart)
Auto
PJLink Input
RGB 2
RGB 1
DIGITAL 2
DIGITAL 1...")
![Page 72
72
Appendix
Write down the PIN code number in the column below and keep it with this\
manual securely. If you forgot or
lost the number and unable to operate the projector, contact the service\
station.
PIN Code Number Memo
Factory default set No: 1 2 3 4*Factory default set No: 4 3 2 1*
*Should the four-digit number be changed,
the factory set number will be invalid.
Put the label below (supplied) on in a prominent place of the
projectors body while it is locked with a PIN code.
While the projector...](http://img.usermanuals.tech/thumb/67/96077/w64_sanyo-plc-xu84-manual_d-71.png "Page 72
72
Appendix
Write down the PIN code number in the column below and keep it with this\
manual securely. If you forgot or
lost the number and unable to operate the projector, contact the service\
station.
PIN Code Number Memo
Factory default set No: 1 2 3 4*Factory default set No: 4 3 2 1*
*Should the four-digit number be changed,
the factory set number will be invalid.
Put the label below (supplied) on in a prominent place of the
projectors body while it is locked with a PIN code.
While the projector...")
71 Appendix Terminal : Mini DIN 8-PIN SERVICE PORT CONNECTOR Vcc - Data + Data Ground 1 2 3 4 USB CONNECTOR (Series A) 2 34 1 R X D ----- ----- GND RTS/CTS GND GND 1 2 3 4 5 6 7 8 COMPUTER IN 2 /COMPONENT IN /MONITOR OUT (ANALOG) Terminal: Analog RGB (Mini D-sub 15 pin) 512341096781514131112 Configurations of Terminals Red (R/Cr) Input/Output Ground (Horiz.sync.) Green (G/Y) Input/Output ----- Blue (B/Cb) Input/Output Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V Power Horiz. sync. Input/Output (Composite H/V sync.) Ground (Vert.sync.) DDC Data Ground Vert. sync. DDC Clock 9 13 10 12 11 14 15 T X D VCC(5V) – DATA + DATA 1 2 3 41 2 3 4 RX – TX + TX – RX + 2 3 4 87654321 5 6 7 8 1 USB CONNECTOR (Series B) Ground LAN TERMINAL ----- ----- ---------- DVI-I TERMINAL (DIGITAL/ANALOG) 1917 21018 31119 41220 51321 61422 71523 81624 C1 C2 C3 C5 C4 T.M.D.S. Data2– No Connect T.M.D.S. Data2+ No Connect T.M.D.S. Data2 Shield DDC Clock DDC Data Analog Vert. sync 1 5 2 4 3 6 7 8 T.M.D.S. Data1– No Connect T.M.D.S. Data1+ No Connect T.M.D.S. Data1 Shield +5V Power Ground (for +5V) Hot Plug Detect 9 13 10 12 11 14 15 16 T.M.D.S. Data0– No Connect T.M.D.S. Data0+ No Connect T.M.D.S. Data0 Shield T.M.D.S. Clock Shield T.M.D.S. Clock+ T.M.D.S. Clock– 17 21 18 20 19 22 23 24 Analog Red Input Analog Ground (R/G/B) Analog Green Input Analog Horiz. sync Analog Blue Input C1 C5 C2 C4 C3 12345876
72 Appendix Write down the PIN code number in the column below and keep it with this\ manual securely. If you forgot or lost the number and unable to operate the projector, contact the service\ station. PIN Code Number Memo Factory default set No: 1 2 3 4*Factory default set No: 4 3 2 1* *Should the four-digit number be changed, the factory set number will be invalid. Put the label below (supplied) on in a prominent place of the projectors body while it is locked with a PIN code. While the projector is locked with the PIN code... PIN Code Lock No. Logo PIN Code Lock No.