Sanyo Dsr 3716 P Manual

English
Recording settings
How to set 60
This menu is used to extend the duration of the alarm 
recording and to set the display method when an alarm 
occurs.
1ALARM RETRIGGER
This setting controls whether the recording duration will be 
extended when another alarm is detected on the same 
channel that is currently performing alarm recording.
ON: 
(1) If a second alarm is detected during DURATION 
operation on the same channel the recording time is 
prolonged by the number of minutes set in 
DURATION...

English
Recording settings
61 How to set
1Display the  screen as 
explained in Displaying the recording settings 
screen, and then turn the S-dial clockwise. (P39)
The OFF indicator of ALARM RETRIGGER starts 
blinking.
2Turn the J-dial, select ON for ALARM 
RETRIGGER, and turn the S-dial clockwise.
The cursor moves to MAIN MON. DISPLAY.
3Press the EXIT/OSD button when the settings are 
complete.
Operation returns to the normal screen.
1Turn the J-dial, select MAIN MON. DISPLAY, and 
turn the S-dial...

English
How to set 62
General settings
Menu configuration
                  
             ALARM            : OFF
             DISK FULL        : ON
             DISK ERROR       : ON
             LOCK WARNING     : ON
             KEY IN           : OFF
             NON REC          : OFF
                 
             DATE             : ON
             TIME             : ON
             QUALITY          : ON
             AUDIO            : ON
             ALARM COUNT      : ON
             ALARM TYPE...

English
General settings
63 How to set
These settings are used to control the operating display 
area of the monitor, to display the date, time and other 
information. Normally all indicators are displayed, but 
they can be hidden, if needed. 
VIDEO LOSS can be set to be displayed when a camera 
video is interrupted due to an unexpected problem, or a 
lamp connected to the rear panel control terminals can 
be turned on. 
1Display the  screen as explained in 
Displaying the general settings screen, and...

English
General settings
How to set 64
These settings are used to generate a warning buzzer 
when the hard disk is full and at alarm events. 
1Display the  screen as explained in 
Displaying the general settings screen, and then 
turn the S-dial clockwise. (P62)
The OFF field in the ALARM line starts blinking.
2Turn the J-dial to select alarm input selections, and 
then turn the S-dial clockwise.
Repeat the same procedure for selecting the desired 
settings for each item.
 ALARM
OFF: Buzzer will not...

English
General settings
65 How to set
This menu is used to set passwords and to limit access 
to the DVR. There are two passwords, one for the 
administrator, and one for the user.
1ADMIN
This item is used to enter the administrators password 
(numerals 0, 1~9 and the letters A~Z can be used for 
passwords). The ON/OFF setting enables or disables the 
security lock. 
 The password must be between 4~8 characters long. If 
the password entered is shorter than 4 characters, the 
password will be erased,...

English
General settings
How to set 66
When the administrator and user level settings are 
complete, activate the security lock. 
1Press the SHUTTLE HOLD button for about 3 
seconds while live video is on the screen. 
The LOCK indicator on the front panel turns on and a 
buzzer sounds to indicate the activation of the security 
lock.
2Press the MENU button to check that the security 
lock is activated. 
The SECURITY LOCKED! screen appears for about 
5 seconds, then the live video display returns.
1Press...

English
General settings
67 How to set
bList of permitted operations after setting the 
passwords
If ADMIN is ON and USER is OFF:
 If the ADMIN password is entered, all operations will be permitted.
 USER password cannot be entered (since the setting is turned OFF)
                           
        LEVEL    PASSWORD(4-8)  USE
        ADMIN        --------   OFF
        USER         --------   OFF
        REC CONTROL         : ADMIN
        CAMERA CONTROL      : ADMIN
1
32
4
Settings
1 ADMIN
ON
2...

English
General settings
How to set 68
L
1DISK1
Displays the total capacity of the internal hard disk. If the 
hard disk is replaced, the capacity may change. 
2DISK2
Displays the total capacity of the second hard disk, if it was 
installed in the DVR. 
3DISK INITIALIZE
This item is used to initialize the internal hard disk. All 
recordings are erased when the hard disk is initialized. 
The initialization is performed on DISK1 and DISK2 
simultaneously. 
4MIRRORING
If another hard disk is installed, and...

English
General settings
69 How to set
1Connecting the DVR to the network
Refer to the Network connection terminals (LAN). (P11)
2Display the  screen as explained 
in Displaying the general settings screen, and 
then turn the S-dial clockwise. (P62)
The OFF field NETWORK CONTROL starts blinking.
3Turn the J-dial, select ON(NETWORK), and then 
turn the S-dial clockwise. 
OFF: 
The DVR is not operated from the network.
ON (NETWORK): 
PC operations are given priority.
ON (DVR): 
DVR operations are given...