Sanyo DP47840 Hdtv Lcd Owners Manual

							11Need help? www.sanyoctv.com              1-800-877-5032
ON-SCREEN MENU OPERATION
VIDEO2 SETTING SCREEN
MENU LANGUAGE SCREEN
DIGITAL CAPTION SCREEN
Choose between English, Spanish and French for your
On Screen menu’s display language. 
Press ENTERon the desired language.
Menu Language
Digital Caption
Use this feature to establish either a Component or
Composite connection to the VIDEO INPUT 2 jacks on
your HDTV.
Use the CURSORkeys to select the type of connec-
tion you’ll use in VIDEO INPUT 2. 
Press ENTER, a blue mark will appear next to the
selected option.
Video2 Setting
SETUP________________________
Display the On Screen menu and use the
CURSORkeys to select Setup. 
Press ENTER.
Captioning is textual information transmitted along
with the picture and sound. Turning Captioning ON (by
pressing the CAPTIONkey during normal TV viewing)
causes the HDTV to open these captions (digital or 
analog) and superimpose them on the screen.
NOTE: Local broadcasters decide which caption signals to
transmit.
Use the CURSOR andkeys to modify Font,
Background,and Foregroundof digital caption text. 
						

							12Need help? www.sanyoctv.com              1-800-877-5032
This feature allows you to set a Current Timefor your
HDTV and enable a Switch On Timefor the HDTV to
turn on at a specific time of day.
When On Timer Functionis set to ON, the TV will 
automatically turn on at the previously set Switch on
Time.
Clock timer
This feature detects ambient room light brightness
and uses that reading to control the panel brightness
level and picture parameters to reduce the HDTV’s
power consumption.
NOTE: When room lighting is dark, the panel brightness
and/or the picture setting parameters such as bright-
ness and contrast are lowered. When room lighting is
bright, parameters are affected opposite.
Use the CURSORkeys to select Onor OFFand
press ENTER.
Light sensor
ON-SCREEN MENU OPERATION
SETUP
_________________________
CLOCK TIMER SCREEN
LIGHT SENSOR SCREEN
ENERGY SAVER SCREEN
Energy Saver settings control the LCD backlight 
brightness to reduce power consumption.
• Level 1: Energy Saver feature is off.
• Level 2: Low power consumption.
• Level 3: Lowest power consumption.
Press ENTERon the desired level.
NOTE: ECO key may also be used as a shortcut to modify the
Energy Saver settings.
Energy Saver
AUTO SHUT-OFF SCREEN
When Auto Shut-off feature is set to ON, it will allow
the HDTV to automatically turn off when no video
and/or audio signals are being received.
NOTES: By factory default, this feature is set to ON. 
TV will automatically turn off if no AV signals are
received in a time span of 15 minutes.
Use the CURSORkeys to select Onor OFFand
press ENTER.
Auto Shut-off 
						

							13Need help? www.sanyoctv.com              1-800-877-5032
SETUP________________________
ON-SCREEN MENU OPERATION
Use this feature to automatically block programs with
content you deem as inappropriate for viewing by
your children.
NOTE: This feature is designed to comply with the United
States of America’s FCC V-Chip regulations. Therefore,
it may not function with broadcasts that originate in
other countries.
ADJUSTING THE V-CHIP RATINGS
Select ONand press ENTER. Select Adjust (Standard)
and press ENTER.
NOTE: Blocking a rating will automatically block all higher
ratings. Unblocking a rating automatically unblocks
all lower ratings.
For V-Chip (Movie) ratings select Movieand press
ENTER, and then select the desired MPAA rating limit.
Press the EXITkey to close the V-Chip menu.
For V-Chip (TV) ratings select TVand press ENTER. Use
the CURSOR keys to select a rating and press
ENTER. Use the CURSOR keys to set the rating’s
status as Blockedor Viewable. Once ratings are set,
press the EXITkey to close the V-Chip menu.
NOTE: Some TV ratings offer more detailed settings such as
Dialogue, Language, Sexual, and Violence. 
V – Chip (Parental Control)
ADVANCED V-CHIP SYSTEM (RRT5)
RRT5 (V-Chip Regional Ratings 5) is an advanced V-Chip
ratings system for over the air digital channels.When
the HDTV detects compatible RRT5 data, it’s down-
loaded & stored in memory, and the Setup 
V-Chip screen is then modified to show the Adjust
(Advanced)option.
Use the CURSOR and  keys to highlight the
different options, and use the ENTERkey to block or
unblock the selected rating.
NOTE: When vertical scroll bars appear, press  CURSOR
to gain access to the additional ratings.
V-CHIP SETUP SCREEN
MOVIE RATING ADJUSTMENT SCREEN
RRT5 ADJUST (ADVANCED) SCREENTV RATING ADJUSTMENT SCREEN
MORE INFORMATION
Additional information about MPAA (Motion Picture
Association of America) and V-Chip rating can be found at:
www.mpaa.org and www.v-chip.org, respectively. 
						

							PICTURE ____________________ON-SCREEN MENU OPERATION
MAIN MENU SCREEN
You may choose between Vivid, Mild, and Standard,
which have predetermined fixed picture parameter
values, or choose the Manualoption for customized
personal settings.
NOTE: Each AV input can have its own picture mode (pre-
determined or manual.) Current input’s selected
option is indicated by a blue marker.
Manualparameters to adjust include:
• Color• Tint• Contrast
• Brightness• Sharpness• Dynamic Contrast
The Detailed Settingoption allows for the adjustment
of 7 additional parameters such as:
• Signal Balancer• Noise Reduction
• White Balance• Vertical Sharpness
• Edge Enhancer• H-Size
• V-Size
NOTE: Default Picture option returns all picture parameters to
their original factory settings.
MANUAL PICTURE SETTINGS
PICTURE SCREEN (MANUAL)
PARAMETER SELECTION SCREEN
VALUE ADJUSTMENT SCREEN EXAMPLES NOTE:
CURSOR  keys select the next/previous parame-
ter without returning to the previous menu screen.
14Need help? www.sanyoctv.com              1-800-877-5032
Display the On Screen menu and use the
CURSORkeys to select Picture. Press ENTER.
Use the CURSORkeys to highlight the picture
parameter you wish to adjust. Press the ENTERkey to
enter the value adjustment screen. Modify the selected
parameter’s value by pressing the CURSORkeys.
ADJUSTING A PICTURE SETTING
Once adjustments are complete, press the EXITkey to
return to normal TV viewing. 
						

							15Need help? www.sanyoctv.com              1-800-877-5032
Pix1
Shows a standard definition 4:3 image
in its original format, a 16:9 wide image
is slightly compressed horizontally.
NOTE: Vertical bars are “attached” to the
sides of the screen.
Pix2
Fills the entire image on the screen. 
NOTE: A standard definition 4:3 image is
stretched horizontally.
Pix3
Image is stretched vertically in compar-
isson with Pix2.
NOTE: Shows a proportional Zoom for a 4:3
image.
Pix4
Image is stretched horizontally in com-
parisson with Pix3.
NOTE: Shows a proportional Zoom for a
16:9 image.
Pix5
Similar to Pix2, image is enlarged hori-
zontally in a linear proportion in which
center portion of screen is stretched
less than the sides.
NOTE: Pix5 has almost no stretching effect
on a 16:9 image.
PIX SHAPE
NOTE: There are other possible aspect ratios that
may be transmitted besides the most
common 4:3 and 16:9.
Pix6Similar to Pix1 with no Overscan*.
Pix7Similar to Pix2 with no Overscan*.
* Overscan permits the image to slightly exceed bottom and top edge limitations.
NOTE: Pix6 and Pix7 are not optimal for Standard Definition content (a thin white line may appear near edge of
screen). Pix6 and Pix7 use is recommended only for PC signal through HDMI.
Pix-Auto(AFD) Active Format Description. Data carried in the video stream includes coded picture
frame information of the actual image, allowing the TV to adjust the Pix-Shape automatically.
NOTE: This Pix-Shape mode is available only for Digital-RF input.
4:3 TRANSMISSION16:9 TRANSMISSION 
						

							16Need help? www.sanyoctv.com              1-800-877-5032
SOUND _____________________
Display the On Screen menu and use the
CURSORkeys to select Sound. Press ENTER.
MAIN MENU SCREEN
MANUAL PARAMETER SCREEN
DETAILED SETTING SCREEN
VALUE ADJUSTMENT SCREEN EXAMPLES
ON-SCREEN MENU OPERATION
Choose an option for your sound settings:
Auto– Sound settings are linked to the current Picture
option and parameters are adjusted accordingly.
Dynamic, Mild, Standard– Predetermined sound
parameters not linked with any Picture option.
MANUAL SOUND SETTINGS
The Manualoption provides different parameters that
can be personally adjusted:
• Bass & Treble
• Bass Extension 
• Audyssey Dynamic Volume 1
• Detailed Setting
– 4-Band Equalizer: Personalize audio highs and lows.
NOTE: Default Sound option returns all sound parameters to
their original factory settings.
1Audyssey Dynamic Volume solves the problem of large
variations in volume level between television programs,
commercials, and between the soft and loud passages of
movies. Audyssey Dynamic EQ is integrated into Dynamic
Volume so that as the playback volume is adjusted auto-
matically, the perceived bass response, tonal balance,
surround impression and dialog clarity remain the same.
NOTE:CURSOR  keys select the next/previous parame-
ter without returning to the previous menu screen.
Use the CURSORkeys to highlight the sound
parameter you wish to adjust. Press the ENTERkey to
enter the value adjustment screen. Modify the selected
parameter’s value by pressing the CURSORkeys.
ADJUSTING A SOUND SETTING
Once adjustments are complete, press the EXITkey to
return to normal TV viewing. 
						

							17Need help? www.sanyoctv.com              1-800-877-5032
PC INPUT
PC PICTURE AND SOUND SCREENS
PC Setting
Auto Adjustment –Automatically adjusts display
position, dot clock and phase.
Dot Clock –Adjust the Dot frequency to match
your computer’s Dot frequency.
Phase –Adjust this parameter when the picture
appears to flicker or is blurred.
H-Position –Move the image horizontally
V-Position –Move the image vertically
Power Saving –Enable the HDTV to turn to
Standby Mode when computer is not in use.
PC Picture and Sound
Standard –Sets predetermined values to the
Picture or Sound parameters.
Manual – Adjust Contrast, Brightness, andColor
Temperature screen settings, and theBass and
Treble audio settings.
NOTE: These settings do not affect normal TV viewing.
Laptop Display
When using your Sanyo HDTV to display a
Laptop’s screen display, holding down the Fn (or
FN) key while pressing the appropriate function
key (F5, F7, F8, etc) should cycle through different
display modes between the laptop and the HDTV.
Modes may include displaying only on the laptop
screen, on both the laptop and the HDTV, or 
displaying only on the HDTV.
NOTE: Fn key and function key symbols on the laptop’s
keyboard may vary from one brand to another.
Hold down and press
PC SETTING SCREEN
Before connecting any cables, disconnect the
AC power cords of both the HDTV and PC from
the AC outlets.
Power on the HDTV and any other peripheral
equipment before powering on the computer.
To avoid an “Out of Range” condition please set
your PC’s output resolution to one compatible with
your HDTV. See PC Resolution chart on page 3.
NOTE: If computer has only DVI Output, a DVI to RGB
adapter will be required, or, a DVI to HDMI cable
and RCA audio cables (see HDMI (DVI) INPUT1 on
page 7.)
Use your HDTV as a computer monitor by hooking
up your PC or Laptop to the TV with the use of an
appropriate monitor cable (not included.)
PC OR LAPTOP HDTV BACK
RGB Monitor
cable
Stereo mini
audio cable
NOTE: Sanyo recommends using a monitor cable that
includes a Ferrite Core.
DVI OUTPUT
JACK RGB  OUTPUT
JACK 
						

							PHOTO VIEWER _____________
USING THE PHOTO VIEWER
Press ENTERon a thumbnail photo to enable the
Rotate, Full View and Start Slideshowfunctions.
Once in Full Viewmode:
Use the CURSORkeys to change picture.
Press ENTERto show the full view options menu.
SLIDE SHOW
In the Slideshow Setupmenu you may turn the Shuffle
and Quick Change options ONor OFF.
Press ENTERon Start Slideshow from the Thumbnail
View Screen or from the full view options menu to
start the slideshow from the current picture. 
JPEG VIEWER USB MENU
Press MENUwhen in Full View or Slideshow mode to
display the USB On screen menu.
Picture Setting –Adjust Color, Tint, Contrast,
Brightness, Sharpness andDynamic Contrast.
NOTE: Picture Settings are separate configurations from the
settings in TV and AV inputs.
USB MAIN MENU SCREENTHUMBNAIL VIEW SCREEN
NOTE: A thumbnail hide icon will appear if a 
picture cannot be decoded or if no 
thumbnail data is available.
SLIDE SHOW
SETUP MENU
FULL VIEW
OPTIONS MENU
View pictures on your HDTV with the use of a USB
mass storage device (not included.)
NOTE: The HDTV switches to
USB Input when a USB
flash drive is detected.USB FLASH
DRIVE
18Need help? www.sanyoctv.com              1-800-877-5032
USB INPUT 
						

							19Need help? www.sanyoctv.com              1-800-877-5032
Your Sanyo HDTV is registered at the time of purchase, please keep sales receipt for future reference.
For your protection in the event of theft or loss of this product, please fill in the information requested
below and KEEP IN A SAFE PLACE FOR YOUR OWN PERSONAL RECORDS.
Model No.______________________________ Date of Purchase _________________________
Serial No.______________________________ Purchase Price ___________________________
Where Purchased_________________________
(Located on back of unit)
Sanyo Manufacturing Corp.
3333 Sanyo Road, Forrest City, AR 72335
ONE-YEAR LIMITED PARTS AND LABOR WARRANTY
THIS LIMITED PARTS AND LABOR WARRANTY IS VALID ONLY ON SANYO TELEVISIONS PURCHASED AND USED IN
THE UNITED STATES OF AMERICA, CANADA, AND PUERTO RICO, EXCLUDING ALL OTHER U.S. TERRITORIES AND 
PROTECTORATES. THIS LIMITED WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER, AND DOES NOT
APPLY TO PRODUCTS USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
WARRANTY APPLICATION
FOR ONE YEARfrom the date of original retail purchase Sanyo Manufacturing Corporation (SMC) warrants this TV to
be free from manufacturing defects in materials and workmanship under normal use and conditions for parts and labor. 
For the FIRST 90 DAYSfrom the date of original retail purchase, Sanyo Manufacturing Corporation will replace any 
defective TV via exchange at the retailer. To ensure proper warranty application, keep the original-dated-sales receipt
for evidence of purchase. Return the defective TV to the retailer along with the receipt and the included accessories,
such as the remote control. The defective TV will be exchanged for the same model, or a replacement model of equal
value, if necessary. Replacement model will be contingent on availability and at the sole discretion of Sanyo
Manufacturing Corporation.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE.
OBLIGATIONS
For one year
from the date of purchase, Sanyo Manufacturing Corporation warrants this product to be free from
defects in material and workmanship under normal use and conditions. During the first 90 days
under this warranty
for any manufacturing defect or malfunction Sanyo Manufacturing Corporation will provide a new TV via exchange at
the retailer.
HOW TO MAKE A CLAIM UNDER THIS WARRANTY
Please call 1-800-877-5032. Please be prepared to give us the television’s model number and serial number when you
call. The model number and serial number are printed on a label attached tothe back of the unit.
For customer assistance, call toll free 1-800-877-5032.
This warranty expresses specific contractual rights; retail purchasers may have additional statutory rights which vary
from state to state.
(EFFECTIVE: March 1, 2007) 
						

							20¿Necesita ayuda? www.sanyoctv.com              1-800-877-5032
PRECAUCIÓN
RIESGO DE CHOQUE ELÉCTRICO  ¡NO ABRIR!
PRECAUCIÓN: PARA REDUCIR EL RIESGO DE CHOQUE ELÉCTRICO, NO QUITE LA CUBIERTA
(O LA TAPA TRASERA).  NO HAY PARTES ADENTRO QUE LAS PUEDA REPARAR EL USUARIO.
REFIÉRASE A PERSONAL CALIFICADO PARA REPARAR EL APARATO.ESTE SÍMBOLO INDICA QUÉ VOLTAJES PELIGROSOS QUE CONSTI-
TUYEN UN RIESGO DE CHOQUE ELÉCTRICO ESTÁN PRESENTES DEN-
TRO DE ESTA UNIDAD.
ESTE SÍMBOLO INDICA QUE HAY INSTRUCCIONES IMPORTANTES DE
OPERACIÓN Y MANTENIMIENTO EN LA LITERATURA QUE SE ANEXA A
ESTA UNIDAD.
ADVERTENCIA: PARA REDUCIR EL RIESGO DE FUEGO O CHOQUE ELÉCTRICO, NO EXPONGA ESTE
APARATO A LLUVIA O HUMEDAD.
IMPORTANTES MEDIDAS DE SEGURIDAD
1. Lea estas instrucciones.
2. Guarde estas instrucciones.
3. Preste atención a los avisos.
4. Siga todas las instrucciones.
5. No use este aparato cerca del agua.
6. Limpie sólo con un trapo seco.
7. No obstruya las aperturas para ventilación. Instale de
acuerdo a las instrucciones del fabricante.
8. No se instale cerca de ninguna fuente de calor como 
radiadores, registros de calor, estufas, u otros aparatos
(incluyendo amplificadores) que produzcan calor.
9. Por seguridad, no elimine la conexión de tierra de la 
clavija. Una clavija polarizada tiene una hoja más ancha 
que la otra. Una clavija de tipo conexión a tierra, tiene dos
hojas y un tercer conector mas prolongado. La hoja ancha
o el conector prolongado están provistas para su seguri-
dad. Si la clavija proveída  no asienta correctamente en el
contacto eléctrico, consulte a un electricista para que esa
toma de ac obsoleta sea remplazada.
10. Proteja el cordón de potencia de que sea pisado o 
perforado, particularmente en las hojas y del punto donde
éste sale del aparato.
11. Sólo use anexos o accesorios especificados por el 
fabricante.
12. Use únicamente con el carro, estante, tripie,
soporte o mesa especificada por el fabricante, o
vendida con el aparato. Cuando se use un carro,
tenga precaución cuando mueva la combinación
de carro/aparato para evitar lesiones en caso de
que se caiga.
13. Desconecte este aparato en caso de tormenta eléctrica o
cuando no se use por un periodo de tiempo prolongado.
14. Refiera todas las reparaciones a personal de servicio califi-
cado. Se requiere de servicio cuando el aparato se ha daña-
do de cualquier forma, como si el cordón de potencia se
dañara de alguna forma, se ha derramado líquido sobre el
aparato o algún objeto le ha caído encima, el aparato se ha
expuesto a la lluvia o humedad, que no opere normalmente
o que se haya caído.15. Si una antena externa se ha conectado al televisor,
asegúrese que el sistema de tierra de la antena esté de
forma que provea alguna protección contra fugas de volta-
je o cargas electrostáticas. En la sección 810-21 del código
eléctrico nacional de los Estados Unidos se menciona infor-
mación con respecto a la manera adecuada de instalar el
sistema de tierra al mástil principal, aterrizaje del cableado
para la unidad de descarga de la antena, tamaño de los con-
ductores de tierra, localización de la unidad de descarga 
de la antena, conexión a los electrodos de tierra, y 
requerimientos de los electrodos de tierra.
16. Un sistema de antena externo no debe instalarse cerca de
líneas de electricidad o circuitos de potencia o alumbrado, o
donde puedan caer sobre líneas de energía eléctrica o 
circuitos cuyo contacto con ellos puede ser fatal.
17. Montaje en pared o techo—Este producto deberá de ser 
montado en la pared o techo siguiendo las recomendaciones
del fabricante.
18. Este aparato no deberá de ser expuesto a ser mojado, y no
se deberán de colocar recipientes con líquido encima de él.
19. Si el conector del cable de AC se usa como artículo de
desconexión principal, entonces éste deberá de 
permanecer accessible todo el tiempo.
EJEMPLO DE ATERRIZAMIENTO DE ANTENA DE ACUERDO
AL CÓDIGO ELÉCTRICO NACIONAL 
(National Electrical Code, ANSI/NFPA 70)
“Nota al instalador del sistema de cable CATV :
Este recordatorio es dado para llamar la atención del instalador
del sistema de cable CATV al Artículo 820-40 del NEC que
provee guías para el aterrizamiento adecuado y, en particular,
especifica que el cable de tierra deberá de estar conectado al
sistema de tierra del edificio, tan cercano al punto de entrada
del cable como sea práctico.”