Sanyo CE42LH2WP Lcd Monitor Instruction Manual

11
INSTALLATION MODE
Installation Mode
Installation Mode
On program
Tuner Menu
Max Volume
Winter mode
RC inhibition
Child Lock
Address
Baud rate
Panel protection
AV Auto shut off
Network Standby
On Timer Function
LED light setting
DCR
Network initial
Temperature Error
IP Address
Subnet
Gateway
DNSOff
Off
63
Off
Off
Off
0
19200
Off
Off
On
Off
Off
Off
>>>
0
000000000000
000000000000
000000000000
000000000000G2.02 0000
Select Adjust
MENUExit
This LCD monitor allows you to set up the following:
SETTING...

12
OPERATION
6HOHFWLRQRISLFWXUHVL]H
Select screen size from FULL, FULL ALL, ZOOM 16:9, TITLE IN 16:9, 
ZOOM 14:9, TITLE IN 14:9, NORMAL or NATUR AL WIDE by pressing 
the WIDE button repeatedly on the Remote Control.
When in AV2 (RGBHV) or PC mode FULL or NORMAL can be 
selected.
Note: Full - Set display area 100%
Only in DVI or AV2 (YPbPr) displaying high resolution content 
FULL and FULL ALL are selectable.
Note:FULL - Set display area 95%
FULL ALL - Set display area 100%
All other inputs AV1, AV3,...

13
OPERATION
PIP/POP Operation
Using this function, you can enjoy a DVI or Network program and an 
image (AV1,AV2,AV3 or PC input) at the same time.
Press the ON/OFF button on the Remote Control repeatly to select 
PIP1,PIP2,POP or OFF mode.
During the PIP/POP mode, press the Main/Sub Picture Swap but-
ton will switch the location for main and sub picture.
Only the sound on the main picture is heard from the monitor 
VSHDNHU7KHVRXQGRQWKHVXESLFWXUHFDQQRWEHKHDUG
The details for PIP/POP...

14
OPERATION (IN TEXT MODE)
Teletext Operation
Teletext is only available via external sources.
Teletext mode can be operated by the following buttons on the Re-
mote Control.
Some buttons have dual functions.
TXT/TV
Press TXT/TV button to select teletext. Press again will display: 
AV mode: AV/TEXT mode/MIX mode/AV.
Note:
MIX mode:AV (broadcast image) screen and the contents of TEXT 
(superimposed) are displayed simultaneously.
CANCEL mode:TEXT/MIX MODE is cancelled temporarily and AV 
image is...

15
SPECIFICATIONS/HELPFUL HINTS
6SHFL

16
DIMENSIONS
989.0
1027.0
165.9418.4 418.4
200.0 400.0
200.0 400.0
100.0
41.8 126.0
50.8
17.6 953.0
402.9
417.9
292.0
300.6
178.5
43.7 930.25925.4
(WALL MOUNT SCREW )
10 x M6, 1.0 PITCH x 12MM
ø4.2
(RC RECEIVER) VIEWING AREA(H)
620.0
546.0
523.0
VIEWING AREA(V )
Control buttons
ø4.2
(LED INDICATOR)Handles x 2
Cables exit terminal cover
Unit: mm
N CE42LH2WP
GBGB 

17
PC/DVI-D/COMPONENT SIGNAL SUPPORT TIMING LIST
N DVI-D signal support timing
N Component signal support timing
Resolution+RUL]RQWDO
Frequency 
N+]Vertical 
Frequency 
+]Remark
720 x 480 15.735 60i SDT V 480i
720 x 576 15.625 50i SDT V 576i
720 x 480 31.25 60p SDT V 480p
720 x 576 31.25 50p SDT V 576p
1280 x 720 45.00 60p HDT V 720p
1280 x 720 37.50 50p HDT V 720p
1920 x 1080 33.75 60i HDT V 1080i
1920 x 1080 28.13 50i HDT V 1080i
Resolution+RUL]RQWDO
Frequency 
N+]Vertical 
Frequency 
+]...

18
RS232C COMMAND TABLES
N Functional Execution Command Table
Command Item
C00 POWER ON
C01 POWER OFF
C03 POWER ON/ OFF (toggle)
C10 Wide toggle
C22 Input
C24 Wide “Natural” direct
C25 Wide “Zoom 16:9” direct
C26 Wide “Title in 16:9” direct
C27 Wide “Zoom 14:9” direct
C28 Wide “Title in 14:9” direct
C29 Wide “Full” direct
C30 Picture
C0F Wide “Normal” direct
C70 AV1 direct
C71 RGB direct
C72 AV2 RGBHV direct
C73 AV2 YPbPr direct
C74 AV3 direct
C75 DVI direct
C76 PC direct
C64 PC Auto adjust
C92 Factory...

19
RS232C COMMAND TABLES
N Time Read Command Table
Status read command Item
CR PANELH Status of accumulated lifetime of panel.
(The same as CR _LAMPH Command)
CR MONHStatus of accumulated lifetime of monitor.
7KHVDPHDV&5 B352-+&RPPDQG
N UK5 Read Command Table (Basic Command)
Command Item Note
CR0 Power On, Standby, power error,
CR1 Input M ode AV1, AV2, . . . , DVI, PC
CR WIDE Wide mode Auto, Normal, Full, . . .
CR PICTURE Picture mode Dynamic, Standard, . . .
CR SIGNAL Signal existence Signal/No...

N7R AK / N7RBK / N7RPK6$1