Sanyo Ce32fd90b User Manual

							English   - 40 -
 
 
 
   
 
 
 
PC Mode Menu System 
 
See “Connecting the LCD TV to a PC” section 
for connecting a PC to the TV set.
For switching to PC source, press “
” button 
on your remote control and select PC input. 
You can also use “Source” menu to switch to 
PC mode. 
 
Note that PC mode menu settings are available only 
while the TV is in PC source. 
  PC Position Menu 
 
Select the first icon by pressing “” or 
“
” button. PC Position menu appears on the 
screen: 
 
 
  Autoposition 
  If you shift the picture horizontally or vertically 
to an unwanted position, use this item to put 
the picture into correct place automatically. 
This setting therefore automatically optimizes 
the display.
Select Autoposition item by using “
” or “” 
buttons. Press OK or “
”, “” button. 
   
Warning 
: Please ensure auto adjustment is 
performed with a full screen image to ensure 
best results. 
  H (Horizontal) Position 
  This item shifts the image horizontally to right 
hand side or left hand side of the screen.
Select  H Position 
 item by using “
” or “
” button. Use “” or “” button to adjust the 
value. 
  V (Vertical) Position 
  This item shifts the image vertically towards the 
top or bottom of the screen.
Select  V Position 
 item by using “” or “
” button. Use “” or “” button to adjust the 
value. 
  Phase 
  Depending on the resolution and scan frequency 
that you input to the TV set, you may see a hazy 
or noisy picture on the screen. In such a case 
you can use this item to get a clear picture by 
trial and error method.
Select  Phase  item by using “
” or “” buttons. 
Use “
” or “” button to adjust the value. 
  Dot Clock 
  Dot Clock adjustments correct the interference 
that appear as vertical banding in dot intensive 
presentations like spreadsheets or paragraphs 
or text in smaller fonts.
Select  Dot Clock  item by using “
” or “
” buttons. Use “” or “” button to adjust the 
value. 
  PC Picture Menu 
  For adjusting PC picture items, do the 
following:
Press “
” or “” button to select the second icon. 
PC Picture menu appears on the screen.
Brightness, Contrast, Colour and Colour 
Temperature settings in this menu are identical 
to settings defi ned in TV picture menu under 
“Analogue TV Menu System”. 
   
Note 
: If you set Colour Temp as User, you can defi ne 
R, G, B settings manually. 
  Sound Menu 
  The items in this menu are described at “Sound 
Menu” section explained in “Menu System”. 
  Feature Menu 
  Feature menu settings are identical to the 
settings explained in “ Feature Menu 
” section 
in “ Menu System ”. 
  Source Menu 
  Source menu settings are identical to the 
settings explained in “ Source Menu ” section 
in “ Menu System 
”. 
 
 
 
 
 
 
Displaying TV Information 
 
 
 
Programme Number 
,  Programme Name 
, 
  Sound Indicator 
 and  Zoom Mode 
 information is 
displayed on the screen when a new programme 
is entered or INFO button is pressed.  
 
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   40MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   4015.04.2009   18:56:5715.04.2009   18:56:57 
						

							English   - 41 -
 
 
Mute Function 
 
Press “” button to disable sound. Mute 
indicator will be displayed in the upper side of 
the screen. 
  To cancel mute, there are two alternatives; the 
fi rst one is pressing the “
” button and the 
second one is increasing the volume level.  
 
 
PIP (Picture-in-Picture) and 
PAP (Picture-and-Picture) 
Modes 
  Press the “” button to switch to PIP mode.
At PIP Mode, a small picture (PIP picture) is 
displayed on the main picture. There are 1 size 
and 4 positions (upper left, upper right, bottom 
left and bottom right) available for the PIP 
window. You can use “
” button to change the 
PIP position. Aspect Ratio of the PIP window is 
fi xed and 4:3.
When PIP Mode is entered, the default active 
window is the PIP window and the active window 
is indicated by a red frame around it. The active 
window can be changed by pressing “
” or “
” button. The status info OSD belongs to active 
window. The place of the status OSDs are same 
for both windows.
Press the “
” button again to exit the PIP 
mode.
Press the “
” button to switch to PAP mode.
At PAP Mode, two pictures with equal sizes are 
displayed on the screen. Aspect Ratios of the 
windows are fi xed.
When you switch to PAP Mode, main window in 
PIP Mode will be displayed on the right side of 
the screen. The active window can be changed 
by pressing “
” or “” button.
Press the “
” button again to exit the PAP 
mode. 
   
 
 
Picture Mode Selection
 
By pressing  PP 
 button, you can change  Picture 
Mode 
 settings in accordance with your viewing 
requirements. Available options are Dynamic, 
Natural and Cinema.  
Note : This function will not be available while 
in PC mode.
   
Freezing Picture 
 
You can freeze the picture on the screen by 
pressing the “ OK 
” button on the remote control. 
Press the “ OK 
” button to freeze picture. Press 
again to quit freeze mode. 
   
 
 
 
Note: This function will not be available while in DTV 
mode.
   
Zoom Modes 
 
You can change the aspect ratio (image size) 
of the TV for viewing the picture in different 
zoom modes.
Press “
” button to directly change the 
zoom mode.
Available zoom modes are listed below. 
  Note: 
In  YPbPr 
 and  HDMI 
 modes, while in 720p-1080i 
resolutions, only 16:9 mode is available.
In PC mode, only 16:9 mode is available. 
 
Auto 
 
When a  WSS (Wide Screen Signalling) 
 signal, 
which shows the aspect ratio of the picture, is 
included in the broadcast signal or the signal 
from an external device, the TV automatically 
changes the  ZOOM 
 mode according to the 
  WSS 
 signal. 
  • When the  AUTO 
 mode does not function 
correctly due to poor  WSS 
 signal quality or 
when you want to change the  ZOOM 
 mode, 
change to another  ZOOM 
 mode manually. 
 
16:9 
 
This uniformly stretches the left and right sides 
of a normal picture (4:3 aspect ratio) to fi ll  the 
wide TV screen. 
 
 
  • For 16:9 aspect ratio pictures that have been 
squeezed into a normal picture (4:3 aspect 
ratio), use the  16:9 
 mode to restore the picture 
to its original shape. 
  4:3 
 
Use to view a normal picture (4:3 aspect ratio) 
as this is its original size. 
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   41MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   4115.04.2009   18:56:5715.04.2009   18:56:57 
						

							English   - 42 -
  
 
Panoramic 
 
This stretches the left and right sides of a normal 
picture (4:3 aspect ratio) to fill the screen, 
without making the picture appear unnatural. 
 
 
  The top and bottom of the picture are slightly 
cut off. 
  14:9 
 
This zooms up the wide picture (14:9 aspect 
ratio) to the upper and lower limits of the 
screen. 
 
 
  Cinema 
 
This zooms up the wide picture (16:9 aspect 
ratio) to the full screen. 
 
 
  Subtitle 
 
This zooms up the wide picture (16:9 aspect 
ratio) with subtitles to the full screen. 
 
   
Zoom
This option zooms to the picture.
Note: You can shift to screen up or down by 
pressing “
” / “” buttons while picture zoom 
is selected as panaromic, 14:9, Cinema or 
Subtitle.
   
 
 
Teletext 
 
Teletext system transmits information such as 
news, sports and weather on your TV. Note 
that is the signal degrades, for example in 
poor/adverse weather conditions, some text 
errors may occur or the teletext mode may be 
aborted. 
   
Teletext function buttons 
 are listed below: 
  “
” Teletext On-Off / PAT Mode 
  Activates teletext mode when pressed once. 
Pressing this button again will split the screen 
into two windows, one displaying the teletext 
and the other displaying the current channel. 
Pressing again will quit the teletext mode. 
  “
” Index 
  Selects the teletext index page. 
  “
” Mix 
  Places the teletext screen over the 
programme. 
  “
” Expand 
  Press once to enlarge top half of the page, press 
again to enlarge the bottom half of the page. 
Press again to revert back to normal size. 
  “
” Reveal 
  Shows hidden information (e.g. solutions of 
games). 
  “
” Hold 
  Holds a text page when convenient. Press again 
to resume. 
  “
” Subcode Pages / Time 
  Selects subcode pages if available when the 
teletext is activated. When the teletext is not 
activated, displays time info if the programme 
has teletext transmission. 
  P+ / P- and numbers (0-9) 
  Press to select a page. 
 
 
Note 
: Most TV stations use code 100 for their index 
pages. 
  Coloured Buttons 
  (RED/GREEN/YELLOW/BLUE) 
  Your TV supports both  FASTEXT 
 and  TOP text 
 
systems. When these systems are available, the 
pages are divided into groups or topics. 
  When  FASTEXT 
 system is available, sections in 
a teletext page will become colour-coded and can 
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   42MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   4215.04.2009   18:56:5815.04.2009   18:56:58 
						

							English   - 43 -
be selected by pressing the coloured buttons. 
Press a coloured button that corresponds to 
with your needs.
The coloured writings will appear, showing you 
which coloured buttons to use when  TOP text 
 
transmission is present. Pressing  P - 
 or  P + 
 
commands will request the next or previous 
page respec tively.  
 
 
 
Tips 
 
Screen Care 
 
Clean the screen with a slightly damp, soft 
cloth. Do not use abrasive solvents as they may 
damage the coating layer of the TV screen. 
For your safety, unplug the mains plug when 
cleaning the set. When moving the TV, hold it 
properly from the bottom part. 
  Image Persistence 
 
Please note that ghosting may occur while 
displaying a persistent image. LCD TVs’ image 
persistence may disappear after a short time. 
Try turning off the TV for a while. 
To avoid this, do not leave the screen in still 
picture for extended periods. 
  No Power 
 
If your TV system has no power, please check 
the main power cable and connection to the 
mains socket outlet. 
  Poor Picture 
 
Have you selected the correct TV system? Is 
your TV set or house aerial located too close 
to a non-earthed audio equipment or neon 
lights, etc.?
Mountains or high buildings can cause double 
pictures or ghost images. Sometimes you can 
improve the picture quality by changing the 
direction of the aerial.
Is the picture or teletext unrecognisable? Check 
if you have entered the correct frequency. 
Please retune the channels.
The picture quality may degrade when two 
peripherals are connected to the TV at the 
same time. In such a case, disconnect one of 
the peripherals. 
  No Picture 
 
Is the aerial connected properly? Are the plugs 
connected tightly to the aerial socket? Is the aerial cable damaged? Are suitable plugs used 
to connect the aerial? If you are in doubt, consult 
your dealer.
No Picture means that your TV is not receiving 
a transmission. Have you selected the correct 
button on the remote control? Try once more.
Also make sure the correct input source has 
been selected. 
  Sound 
 
You can not hear any sound. Did you perhaps 
interrupt the sound, pressing the 
 button?
Sound is coming from only one of the speakers. 
Is the balance set to one  extreme? See  Sound 
Menu . 
 
Remote Control 
 
Your TV no longer responds to the remote 
control. Perhaps the batteries are exhausted. 
If so you can still use the local buttons at the 
bottom of the TV. 
  Input Sources 
 
If you cannot select an input source, it is possible 
that no device is connected. 
Check the AV cables and connections if you 
have tried to connect a device.  
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   43MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   4315.04.2009   18:56:5815.04.2009   18:56:58 
						

							 English   - 44 -
 
Appendix A: PC Input Typical Display Modes
 
 
The display has a maximum resolution of  1920 x 1200 . The following table is an illustration of 
some of the typical video display modes.
Your TV may not support different resolutions. Supported resolution modes are listed below.
If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.  
Note: Resolution modes indicated with (*) are not available for PIP/PAP modes.
 
IndexResolution Frequency
Standard
Hor Ver Ver (Hz)Hor 
(KHz)
1640 350 85 37.9 VESA
2640 400 85 37.9 VESA
3640 400 70 31.5 IBM VGA
4640 480 60 31.5 VESA
5640 480 66 35.0 MAC
6640 480 72 37.9 VESA
7640 480 75 37.5 VESA
8640 480 85 43.3 VESA
9800 600 56 35.2 VESA
10800 600 60 37.9 VESA
11800 600 70 43.8
12800 600 72 48.1 VESA
13800 600 75 46.9 VESA
14800 600 85 53.7 VESA
15832 624 75 49.7 MAC
161024 768 43 35.5VESA 
(interlace)
171024 768 60 48.4 VESA
18*1024 768 70 56.5 VESA
19*1024 768 72 57.7
20*1024 768 75 60.0
21*1024 768 85 68.3
221152 864 60 53.8
23*1152 864 70 64.2 VESA
24*1152 864 75 67.5 VESA
25*1152 864 85 77.1 VESA
26*1152 870 75 68.9 MAC
271280 768 60 47.7 VESA
281360 768 60 47.7
29*1280 768 75 60.2 VESA
301280 960 60 60.0 VESA
31*1280 960 75 75.0 VESA
32*1280 960 85 85.9 VESA
331280 1024 60 64.0 VESA
34*1280 1024 75 80.0 VESA
35*1280 1024 85 91.1 VESA
361400 1050 60 65.3
37*1400 1050 75 82.3
381440 900 60 55.9
39*1440 900 75 70.6
40*1600 1200 60 75.0 VESA
411680 1050 60 65.3
42*1920 1200 60 74.5
 
 
Note : Your PC may not work correctly with some resolution modes which are listed above because 
of  unexpected causes. When you confront with such a problem, please try switching your PC to 
different resolution modes.
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   44MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   4415.04.2009   18:56:5815.04.2009   18:56:58 
						

							English   - 45 -
 
Appendix B: Supported DVI Resolutions
When connecting devices to your TV’s connectors by using DVI converter cables (not supplied), 
you can refer to the following resolution information.
 
24Hz 25Hz 30Hz 50Hz 60Hz
480i
;
480p
;
576i
;
576p
;
720p
;;
1080i
;;
1080p
;;;; ;
   
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   45MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   4515.04.2009   18:56:5915.04.2009   18:56:59 
						

							 English   - 46 -
 
Appendix C: AV and HDMI Signal Compatibility (Input Signal 
Types)
   
Source Supported Signals Available
EXT-1 
(SCART 1)PAL 50/60 O
NTSC 60 O
RGB 50 O
RGB 60 O
EXT-2 
(SCART-2)PAL 50/60 O
NTSC 60 O
RGB 50 X
RGB 60 X
S-VHS 50 O
S-VHS 60 O
FAVPAL 50/60 O
NTSC 60 O
YPbPr 480I 60Hz O
480P 60Hz O
576I 50Hz O
576P 50Hz O
720P 50Hz O
720P 60Hz O
1080I 50Hz O
1080I 60Hz O
1080P 50Hz O
1080P 60Hz O
HDMI1 
HDMI2480I 60Hz O
480P 60Hz O
576I 50Hz O
576P 50Hz O
720P 50Hz O
720P 60Hz O
1080I 50Hz O
1080I 60Hz O
1080P 50Hz O
1080P 60Hz O
1080P 24 HZ O
   
  (X: Not Available, O: Available)
   
 
Note : In some cases a signal on the LCD TV may not be displayed properly. The problem may 
be an inconsistency with standards from the source equipment (DVD, Set-top box, etc.). If you do 
expereince such a problem please contact your dealer and also the manufacturer of the source 
equipment. 
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   46MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   4615.04.2009   18:56:5915.04.2009   18:56:59 
						

							English   - 47 -
 
Appendix  D : Pin Specifi cations 
 
SCART connector pin specifi cations 
Pin Input signal Pin Input signal
1AUDIO OUT (RIGHT) 12
Not used
2AUDIO IN (RIGHT) 13RGB-R GND
3AUDIO OUT (LEFT/MONO) 14GND
4AUDIO GND 15RGB-R / S.VHS CHROMINANCE IN
5RGB-B GND 16BLANKING SIGNAL
6AUDIO IN (LEFT/MONO) 17COMPOSITE VIDEO GND
7RGB-B IN 18BLANKING SIGNAL GND
8AUDIO / RGB SWITCH / 16:9 19COMPOSITE VIDEO OUT
9RGB-G GND 20COMPOSITE VIDEO / S.VHS LUMINANCE IN
10Not used 21GND / SHIELD (CHASSIS)
11RGB-G IN  
 
HDMI connector pin specifi cations 
Pin Input signal PinInput signal
1TMDS Data2+ 11 TMDS Clock Shield2TMDS Data2 Shield 12 TMDS Clock-3TMDS Data 2- 13 CEC4TMDS Data 1+ 14 Reserved (N.C. on device)5TMDS Data1 Shield 15 SCL6TMDS Data1- 16 SDA7TMDS Data0+ 17 DDC/CED Ground
8TMDS Data0 Shield 18 +5V Power
9TMDS Data0- 19 Hot Plug Detect10TMDS Clock+    
 
Signal Input 
 
PC RGB Terminal (D-sub 15-pin connector) 
Pin Input signal1R2G or sync on green3B4No connection5No connection6R.GND7G.GND8B.GND9No connection10GND11No connection12[SDA]13H.sync or H/V composite sync14V.sync. [V.CLK]15[SCL]                                                                          
 
 
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   47MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   4715.04.2009   18:56:5915.04.2009   18:56:59 
						

							 English   - 48 -
 
Appendix E: PIP/PAP Mode Combinations 
MAINTVDTV/
USBScart1 Scart2Scart2SFAV HDMI1 HDMI2 YPbPrPC-
VGA
TV889(RGB)8 8 8 9999
DTV/
USB8 8 99 9 99999
Scart19(RGB)989(RGB)9(RGB)9(RGB)9999
Scart2899(RGB)8 8 8 9999
Scart2S899(RGB)8 8 8 9999
FAV899(RGB)8 8 8 9999
HDMI19999 9 9 8 8 99
HDMI29999 9 9 8 8 99
YPbPr9999 9 999 8 9
PC-
VGA9999 9 9999 8
   
( RGB 
): This indicates that, selection is possible only if Scart-1 has a RGB signal.
  Restrictions 
: Scart-1 source must have RGB signal to perform PIP\PAP with sources TV, Scart-2,  
Scart-2 S, FAV.
If these sources are set to main window, and Scart-1 does not have a RGB signal, Pip\Pap source 
can not be switched to the Scart-1 source.
If scart-1 source is set to main window, and scart-1 does not have a RGB signal, Pip\Pap source 
can not be switched to TV, Scart-2, 
Scart-2 S and FAV sources.
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   48MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   4815.04.2009   18:56:5915.04.2009   18:56:59 
						

							English   - 49 -
Appendix F: Supported File Formats for USB Mode
 
 
MediaFile 
ExtensionFormatRemarks
Video Audio(Maximum resolution/Bit rate etc.)
Movie.mpg/ .dat/ 
.vobMPEG1 MPEG Layer 1/2/3 60 Hz (frame refresh rate).
MPEG2 MPEG2 60 Hz (frame refresh rate).
DivX mp3, ac3 DivX 3.1.x, 4.x, 5.x
XviD/ 3ivx PCM/MP3/WMA XviD Version up to: 1.1.2 / DivX 3.1.x, 4.x, 5.x
MPEG4 PCM/MP3/WMA Up to 640 x 480.
.aviMS ISO 
MPEG4PCM/MP3/WMA Support SP and ASP
MJPEG PCM 30fps@VGA
Music- - PCM Sample Rate: 8K ~ 48KHz
.mp3 -MPEG 1/2
Layer 1/ 2/
3 (MP3)Sample Rate: 8K ~ 48KHz, Bit Rate: 
32K~320Kbps
.wma - WMASample Rate: 8K ~ 48KHz, Bit Rate: 5K ~ 
192Kbps
Photo.jpgBaseline 
JPEGWxH = 14592x12288, Up to 179 Mega-pixel
Support format: 444/ 440/ 422/ 420/ Grayscale
Progressive 
JPEGUp to 4 Mega-pixel
Support format: 444/ 440/ 422/ 420/ Grayscale
.gif GIF WxH = 14592x12288, Up to 179 Mega-pixel
.bmp bit map WxH = 14592x12288, Up to 179 Mega-pixel
External 
Subtitles.srt
Support Text File Format, but do not support 
Picture File Format .smi
.sub
Note: It is not guaranteed that all DivX formats are supported.
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   49MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   4915.04.2009   18:56:5915.04.2009   18:56:59