Sanyo Ce32fd90b User Manual

							English   - 20 -
 
 
 
 
Initial Settings 
 
When the TV set is operated for the fi rst  time, 
the IDTV turns on fi rst.
Because this is the fi rst time the TV is used, 
there are no channels stored in the memory.
When the TV is turned on for the fi rst time, the 
menu for the language selection appears on the 
screen. The message “Welcome please select 
your language!” is displayed in all language 
options sequentially in the OSD.
By pressing the “
” or “” buttons highlight the 
language you want to set and press OK button. 
After then, “First time installation” OSD will 
appear on the screen. By pressing “
” or “” 
buttons, select the country you want to set and 
press OK button. button (** for EU countries).
Note: Country selection OSD will not be 
available for UK.
After then, the active antenna selection OSD 
appears on the screen:
By pressing “left cursor ikonu ” or “right cursor 
ikonu” buttons, set active antenna mode as on 
or off.
If an active antenna is connected to your TV, 
you can select this option as On. Antenna 
power should be “Off” when standard antenna 
is used instead of the active antenna. See 
Confi guration Menu in the following sections 
for more information. 
Press OK button on the remote control to 
continue and the following message will be 
displayed on the screen:
   
 
  To start installation process, select “Yes”, to 
cancel select “No”.  
  • To select the “Yes” or “No” option, highlight the 
item by using “
” or “” buttons and press the 
OK button.   The IDTV will automatically tune to the UHF or 
VHF (** for EU countries) transmission channels, 
searching for digital terrestrial TV broadcasts 
and displaying the names of channels found. 
This process will take about a few minutes. To 
cancel searching, you can press the “M” button 
at any time during the process.
   
 
  After Automatic Search is completed, the 
following message asking for analogue channel 
search appears on the screen: 
 
 
  To search for analogue channels, select “Yes”.  
TV switches to the analogue TV mode. The 
menu below is displayed to search for analogue 
channels: 
 
 
  Select your Country, Language and Text 
language by using “
” or “” and “” or “” 
buttons. Press OK or RED button to continue. 
To cancel, press the BLUE button.
For more information on this process, see 
“Install Menu” section. 
   
Note 
: For proper functioning of digital teletext in DTV 
mode, you should set country as UK in analogue 
AUTO PROGRAM (for UK only).  
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   20MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   2015.04.2009   18:56:4515.04.2009   18:56:45 
						

							English   - 21 -
 
General Operation
 
 
Pressing the “TV/DTV” button at any time 
while watching television programmes will 
switch the TV set between the digital terrestrial 
television broadcasting and its normal analogue 
broadcasting. 
  Information Banner 
 
• Whenever you change channel, using the 
P- / P+ button or the numeric buttons, the TV 
displays the broadcast picture along with an 
information banner at the bottom of the screen 
(available only in DTV mode). This will remain 
on the screen for a few seconds.  
  • The information banner can also be displayed 
at any time while watching TV by pressing the 
INFO button on the remote control: 
 
 
  The information banner gives information on 
the channel selected and the programmes on 
it. The name of the channel is displayed, along 
with its channel list number. 
  Hint: Not all channels broadcast the programme 
data. If the name and time of the programme are not 
available, then information banner will be displayed 
with blanks. 
  • Icons are also displayed in the information 
banner and if this channel is a favourite 
channel, favourite channel icon will also be 
displayed. 
  If the selected channel is locked, you must 
enter the correct four numeric code to view the 
channel. “ Enter PIN 
” will be displayed on the 
screen in such a case: 
 
 
  Electronic Programme Guide 
(EPG)
   
• Some, but not all, channels send information 
about the current and next events. 
• Please note that event information is updated 
automatically. If there is no event information 
data available in channels, EPG will be 
displayed with blanks.
• Press  GUIDE 
 button to view the EPG menu.
• Electronic Programme Guide appears on the 
screen. It is able to get Information of the 
channel - programs weekly by means of 7-DAY-
EPG. All programs of channels are displayed. 
The current program is highlighted and there 
is brief information about the programs of 
the channel, such as: name, short/extended 
event description, start & end time. The time 
scale can be changed by pressing left or right 
buttons. If there is any event information data 
available, only programme names and dates 
are  displayed. On the bottom of the screen; 
info bar, showing all the available commands, 
will be displayed.
   
 
   
RED button (Shrink) 
: makes the info boxes 
smaller.
  GREEN button (Expand) 
: makes the info 
boxes larger.
  YELLOW button (Prev. Day) 
: displays the 
programmes of previous day.
  BLUE button (Next day) 
: displays the 
programmes of the next  day.
  INFO (Details) 
: displays the programmes in 
detail.
  Numeric buttons (Jump) 
: go to preferred 
channel directly via numeric buttons.
  OK 
 : views options for future programmes.  
  P
						

							English   - 22 -
 
 
• Press  “0” 
 button to view Guide Search 
menu. Using this feature, you can search the 
programme guide database in accordance 
with the genre selected or with name match. 
Info available in the programme guide will be 
searched and results matching your criteria 
will be listed.  You can select programmes or 
set timers by highlighting a channel and then 
pressing OK button.
 
Note: Searching process can be performed by the 
desired date rate or by the channel basis. 
  Displaying Subtitles 
 
With digital terrestrial broadcasting (DVB-T), 
some programmes are broadcast with subtitles.  
Subtitles can be displayed while watching these 
programmes.
Note: You can enable subtitles by pressing the 
 (** for UK) or GREEN (* for EU countries)
buttons.
   
Press the “ M 
” button to display the main menu, 
highlight the  Setup 
 and then  Language 
 menu 
using “
” or “” button and press the  OK 
 button 
to display the “Language settings” menu.
   
Highlight the “Subtitle” item in “Language 
settings” menu and use 
” or “ button to set 
Subtitle to the desired language.
If “Subtitle” is on and a language option is set, 
pressing the TELETEXT (
) button causes 
the following warning message display on the 
screen (* for UK only): 
 
 
  Digital Teletext (** for UK only) 
 
With digital terrestrial broadcasting (DVB-T), 
in addition to pictures and sound, you can also 
view digital teletext.
Digital teletext is sometimes broadcast at the 
same time with the normal broadcasting. 
  • Press the TELETEXT (
) button.
• The digital teletext information appears.
• Operate it with the coloured buttons, cursor 
buttons and OK button.   The operation method may differ depending on 
the contents of the digital teletext.
Follow the instructions displayed on digital 
teletext screen. 
  • When Press “SELECT” button or similar 
message appears on the screen, press the 
OK button.
• When the TELETEXT (
) button is pressed, 
the TV returns to television broadcasting.
• With digital terrestrial broadcasting (DVB-T), 
in addition to digital teletext broadcasting 
together with the normal broadcasting, there 
are also channels with just digital teletext 
broadcasting.
• The aspect ratio (picture shape) when watching 
a channel with just digital teletext broadcasting 
is the same as the aspect ratio of the picture 
viewed previously.
• When you press the TELETEXT (
) button 
again, the digital teletext screen will be 
displayed.
Analogue Teletext
Use of teletext and its functions are identical to 
the analogue text system. Please do refer to the 
“TELETEXT” explanations.
 
 
Widescreen
 
 
Depending on the type of the broadcast being 
transmitted, programmes can be viewed in 
a number of formats. Press the  WIDE  button 
repeatedly to select between Auto, 16:9, 4:3, 
Panoramic, 14:9, Cinema, Zoom or Subtitle.
When Auto is selected, the format being 
displayed is determined by the picture being 
broadcast.
   
 
PLEASE NOTE 
: Menu size changes depending on 
the chosen image size.  
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   22MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   2215.04.2009   18:56:4615.04.2009   18:56:46 
						

							English   - 23 -
 
 
 
IDTV Menu System 
 
 
The IDTV menu can only be viewed when 
watching digital terrestrial broadcasting. Press 
the TV/DTV button to turn IDTV on while the TV 
is in analogue mode.
Press the “ M 
” button. The menu below appears 
on the screen: 
 
 
  Channel List
 
 
Using the “” or “” button on the remote 
control, make sure that the fi rst  item,  Channel 
List, is highlighted and press the OK button to 
display the Channel List.
The following operations can be performed in 
this menu:
   
• Navigating the entire list of channels
• Deleting channels
• Renaming channels
• Adding locks to channels
• Setting favourites
• Moving channels 
  Channel List is the place where the channels 
are managed. 
 
   Navigating the Entire Channel List 
  Press “
” or “” button for selecting the 
previous or next channel. You can press  P+ 
 or 
  P- 
 button to move page up or page down.
To watch a specifi c channel, highlight it using  
“
” or “” button and then press “ OK 
” button, 
while the “Select” item on Channel List menu is 
highlighted by using “
” or “” button.
Then the name and number of the selected 
channel will be displayed in the top-left and 
top-right of the channel display at the top-right 
of the screen, respectively. 
  Moving the channels in the channel list 
  • Press “
” or “” buttons to select the channel 
that will be moved.
• Press “
” or “” buttons to select the “ Move 
” 
item on Channel List menu.
   
Following OSD will be displayed next to “ OK 
” 
item to indicate that enter a number by using 
the numeric buttons on the remote control and 
press “ OK 
”  to confi rm. 
 
 
 
 
  Note: If you enter the same programme number 
of the channel that you want to move, “.... channel 
services will be replaced. Do you want to continue?” 
   
OSD will be displayed. Press OK to confi rm or select 
“No” to cancel. 
  Deleting the Channels in the Channel List 
  • Press “
” or “” button to select the channel 
that will be deleted.
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   23MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   2315.04.2009   18:56:4715.04.2009   18:56:47 
						

							English   - 24 -
 
 
• Press “” or “” button to select the “Delete’’ 
item on Channel List menu. As seen on 
Channel List menu,  SELECT 
 is displayed next 
to Delete item at the bottom of the screen to 
indicate that you must press the  OK 
 button to 
delete the highlighted channel in the channel 
list. 
 
 
  Press the  OK 
 button to delete the highlighted 
channel in the channel list. Then the message 
below appears on the screen: 
 
 
  Press “
” or “” button to highlight the desired 
option. If  OK 
 button is pressed while “ Ye s 
” is 
highlighted, the highlighted channel is deleted. 
Selecting “ No 
” cancels the deletion.
   
Renaming Channels 
  To rename a specifi c channel, the channel must 
be highlighted by pressing “
” or “” button. 
Then highlight the  Edit Name 
 item by pressing  
“
” or “” button as illustrated below. Press the 
  OK 
 button to activate the rename feature.
   
 
  Now pressing “
” or “” button moves to the 
previous/next character. Pressing “
” or “
” button toggles the current character, i.e., ‘b’ 
character becomes ‘a’ by “
” and ‘c’ by “”. 
Pressing the numeric buttons ‘0...9’ replaces 
the highlighted character with the characters 
printed above the button one by one as the 
button is pressed.  
  Press the “M” button to cancel the editing or OK 
button to save the new name. 
  Adding Locks to Channels 
  Channel locking provides a password-protected 
access to channels selected by parents. In order 
to lock a channel you should know the parental 
lock password (default value is set to 0000 in 
the factory and can only be changed from the 
Confi guration menu). 
Select the channel to be locked by highlighting 
it and select the Lock option by pressing “
” 
or “
” button. When the OK button is pressed, 
a dialog OSD asking for the password will be  
displayed.
   
 
  Enter the password by using the numeric 
buttons on the remote control. The lock icon “
” will now be displayed next to the selected 
channel. Repeat the same operation to cancel 
the lock. 
  Setting Favourites 
  You can set various channels as favourites so 
that only the favourite channels are navigated. 
To set a favourite you should highlight the 
“Favourites” item at the bottom of the Channel 
List menu. 
  To set a favourite you should highlight the 
“Favourites” item at the bottom of the Channel 
List menu. Then press OK button and Edit 
Favourite List menu appears on the screen. 
You can list your favourite channels using 
Favourite List. 
Channel list OSD will look like this:  
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   24MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   2415.04.2009   18:56:4715.04.2009   18:56:47 
						

							English   - 25 -
  
  How to Add a Channel to a Favourites List
   
• By pressing “
” or “” buttons, highlight the 
channel  that you want to add to the favourite 
list.
• By pressing  OK  button, the highlighted channel 
is added to the Favourite List. 
• F icon indicates that a channel is added  to 
Favourite List.
   
Removing a Channel from Favourite List
   
• Highlight the channel that you want to remove 
from the favourite list and press OK button to 
remove.You can press OK button again to re-
add a channel.
   
• To activate Favourites, go to the Confi guration 
menu and select Favourite mode. Use “
” / “
” to set Favourite mode as on. To cancel 
Favourites, set Favourite Mode to Off.
   
On Screen Help  
  For all menus, press the  INFO 
 button to display 
the help information about the menu functions. 
For Channel List menu the following message 
is displayed on the screen: 
 
 
  Program Guide 
  This section is same with the instructions given 
in the General Operations page. Please see 
Electronic Programme Guide (EPG) section in 
the General Operations part. 
  Timers 
  
  To display timers window, activate the item 
from the main menu. To add a timer, press the 
  YELLOW 
 button on the remote control. Then  
“Add Timer” window appears. 
   
Channel 
: “
” or “” keys will navigate the user 
through the TV or Radio list.
  Date 
: Starting date is entered via the Left/Right 
or the numeric buttons.
  Start 
: Starting time is entered via the Left/Right 
or the numeric buttons.
  End 
: Ending time is entered via the Left/Right 
or the numeric buttons.
Duration: Duration between Start and End 
time.
Repeat: You can set a timer to be repeated as 
Once, Daily or Weekly.
  Change/Delete 
: permits or prohibits any 
modifi cations for other users.
You can save the adjustments by pressing the 
GREEN key or cancel the process by pressing 
the RED button. You can edit the list via GREEN 
key and delete with the RED button. 
  Conditional Access 
 
• Press the  M 
 button to display the main menu 
and use the “
” or “” button to highlight the 
“Conditional Access” line and press the  OK 
 
button: 
 
 
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   25MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   2515.04.2009   18:56:4815.04.2009   18:56:48 
						

							English   - 26 -
 
Some Digital Terrestrial channels operate 
on a Pay Per View basis. These require a 
subscription and a hardware decoder.
Obtain the Conditional Access Module (CAM) 
and the viewing card by subscribing to a pay 
channel company, then insert those to the TV 
using the following procedure. 
  • Switch off the TV and unplug from the 
mains.
• Insert the CAM and then the viewing card to the 
slot that is located in the terminal cover at the 
left-hand side of the TV (from front view).
• The CAM should be correctly inserted, it is 
impossible to insert fully if reversed. The CAM 
or the TV terminal may be damaged if the CAM 
is forcefully inserted.
• Connect the TV to the mains supply, switch 
on and then wait for few moments until the 
card is activated.
• Some CAMs may require the following set 
up. Please set the CAM by entering the IDTV 
menu, Conditional Access then pressing the 
OK button. (CAM set up menu is not displayed 
when it is not required.)
• To see the viewing contract information: 
enter IDTV; press the “ M ” button, then 
highlight Conditional Access and press the 
  OK  button.
• When no module is inserted, “No Conditional 
Access  module detected” message appears 
on the screen.
• Refer to the module instruction manual for 
details of the settings. 
NOTE: Insert or remove the CI module only when the 
TV is in STAND-BY mode or SWITCHED OFF.
  TV Setup 
 
You can use this item to display the TV 
functions.
The digital TV Setup menu screen is accessed 
from the main menu. Press the  “M” 
 button to 
display the main menu and use “
” or “” button 
to highlight “TV Setup”, press the  OK 
 button to 
display TV Setup menu screen.  
 
  You can fi nd detailed information for all menu 
items in “Analogue TV Menu System” section. 
  Setup 
 
The adjustments in this menu are given as the 
following: 
 
 
  Confi guration 
  You can confi  gure the settings of your TV. Select 
Confi guration from Setup menu and press  OK 
 
to view this menu. Press the  EXIT 
 button on the 
remote control to exit. 
 
 
  AC3 Audio (* for EU countries only) 
  In the Confi guration Menu, highlight the AC3 
Audio item by pressing  “
” or “” buttons. Use 
the  “
” or “” buttons to set the AC3 Audio as 
On or Off.
If the channel that you are watching supports 
AC3 Audio, turn this setting on. 
  Hard of Hearing (* for EU countries only) 
  Use  “
” or “” button to select Hard of Hearing 
and then press  “
” or “” button to set this 
setting  as On or Off.
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   26MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   2615.04.2009   18:56:4815.04.2009   18:56:48 
						

							English   - 27 -
If the broadcaster enables any special signal 
concerning the audio, you can set this setting 
as On to receive such signals. 
  Favourite Mode 
  Use this function to enable or disable favourite 
mode. Press “
” / “” button to set this function 
as on or off. 
  Channel List 
  Use “
” or “” buttons to go to Channel List 
option. Use “
” or “”  buttons to toggle Channel 
List Mode. If you select “TV Only”, with the “
” or “”  buttons, you navigate through only TV 
channels. If you select “Radio Only”, with the “
” 
or “
”  buttons, you navigate through only radio 
channels.  If you select “Text Only”, with the “
” 
or “
”  buttons, you navigate through only text 
channels. To save the recent changes and exit; 
press the  “M” 
 button. 
Active Antenna
Use “
” or “” buttons to highlight Active 
Antenna option.
When antenna power option is set as On 
by pressing “
” or “” button, +5V will be 
transmitted to the antenna output.
This feature enables the use of active 
antenna.
Note: Antenna power should be “Off” when standard 
antenna is used instead of the active antenna.
Scan Encrypted (**) 
(**) For UK only. 
Scan Encrypted Channel feature will always be 
ON after performing first time installation. When 
this setting is on, search process will locate the 
encrypted channels as well. If it is set as OFF 
manually, encrypted channels will not be located 
while in automatic search or manual search.
Use “
” or “” button to select Scan Encrypted 
and then press “
” or “” button to set this 
setting as On or Off.
  Receiver Upgrade 
  Over Air Download (OAD) 
  To ensure that your TV always has the most 
update information, use this setting. Please 
ensure that the TV is set to standby mode. The  
TV automatically powers up at 3.00 A.M. each 
day and searches for any new information which 
may be broadcast and will download this to your receiver automatically. This operation will 
normally take approximately 30 minutes. If you 
have an important recording to be carried out 
at 3.00 A.M. and you do not want to interrupt 
it, disable auto OAD search by performing the 
following:  
 
 
  • Press  “M” 
 button and using the “
” or “” 
buttons to choose Setup and press the  OK  
button.
• Highlight Confi guration menu with “
” or “” 
keys and press  OK 
.
• Use “
” or “” buttons to choose “RECEIVER 
UPGRADE” and press  OK 
 button. 
 
 
  • Using the“
” or “” button change “Automatic 
scanning” from Enabled to Disabled.
• Highlight “Scan for upgrade” menu with 
“
” or “” keys and pres OK to commence 
upgrade.
• After the search progress is completed, the 
message “ Completed searching for upgrade. 
No new software was found” appears on the 
screen if no new software is found.
• Do not forget to re enable the automatic OAD 
function after you have made your recording 
by repeating the above instructions but this 
time selecting ENABLE. 
Note: Your TV may start in First Time Installation mode 
after OAD update.
  Parental Control 
  Use “
” or “” buttons to go to Parental Lock 
option. Press OK button to enter the menu. 
A dialog box asking for the lock key will be 
displayed. The key is set to “0000” initially. Enter 
PIN. If it is incorrect, “Wrong Pin” OSD will be 
displayed. If it is correct, the Parental Control 
menu will be displayed: 
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   27MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   2715.04.2009   18:56:4915.04.2009   18:56:49 
						

							English   - 28 -
  
  Maturity Lock (**) 
  (**) If you set Country option as UK in the fi rst 
time installation, Maturity Lock option will not 
be visible.
When set, this option gets the maturity information 
from the broadcast and if this maturity level is 
disabled, does not show video-audio. 
  Menu Lock 
  In menu lock you can set locking for all menus, 
or the Installation Menu to restrict access to 
these menus. If the menu lock is disabled, there 
will be free access to the menu system. Use  “
” 
or “
” buttons to go to Menu Lock option. Use  “
” or “” buttons to choose Menu Lock Mode. 
   
DISABLED 
 : All menus are unlocked. 
  ALL MENUS 
 : All  Menus are  accessible only 
with the correct lock key. So the user cannot 
add, delete, rename, channels, cannot set 
timers. 
  INSTALLATION MENU 
: Installation menu is 
locked.So the user can’t add channels. Changes 
will be updated after exiting ‘Configuration 
Menu’.
  Set PIN 
Use “
” or “” buttons to go to “Set PIN” option. 
Press  OK 
 to display the “Set PIN” window. Use 
numeric buttons to enter new pin number you 
will need to input your new pin a second time 
for verifi cation purposes. If both pin numbers 
are four digits long and the same, the pin will 
be changed. The factory default pin number is 
0000, if you change the pin number make sure 
you write it down and keep it safe. 
 
 
Time Settings
In the configuration menu, highlight the Time 
Settings item by pressing “
” or “” buttons. 
Press OK and Time Settings sub menu will be displayed on the screen. Current Time,Time 
Zone Setting and Time Zone will be available.
Use “
” or “” buttons to highlight the Time 
Zone Setting. Time Zone Setting is set using 
“
” or “” buttons. It can be set to AUTO or 
MANUAL. When AUTO is selected, Current 
Time and Time Zone options will not be available 
to be set. If MANUAL option is selected as the 
Time Zone Setting, Time Zone can be altered:
• By pressing “
” or “” buttons select Time 
Zone. Use “
” or “” buttons to change the 
Time Zone between GMT-12 or GMT+12. 
Current Time on the top of the menu list will 
then change according to the selected Time 
Zone.
Audio Description
Audio description refers to an additional 
narration track for blind and visually impaired 
viewers of visual media, including television and 
movies. The description narrator talks through 
the presentation, describing what is happening 
on the screen during the natural pauses in 
the audio (and sometimes during dialogue, if 
deemed necessary). You can use this feature, 
only if the broadcaster supports that additional 
narration track. Use “
” or “” buttons to select 
an item. Then use “
” or “” buttons to set.
Audio Description
This function enables or disables the audio 
description feature by pressing the “
” or “
” buttons.
Preferred Language
By pressing the “
” or “” buttons the preferred 
audio description language is being changed.
This setting can be used, only if it is available.
Relative Volume
Using this option, the Audio Description volume 
level can be increased or decrased relatively, 
according to the general volume.
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   28MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   2815.04.2009   18:56:5015.04.2009   18:56:50 
						

							English   - 29 -
Standby Search (*)
(*) This setting is visible only when the Country 
option is set to Denmark, Sweden, Norway or 
Finland.
Use “
” or “” button to select Standby Search 
and then press “
” or “” button to set this 
setting as On or Off. If you change Standby 
Search to Off, this function will be unavailable.
To use Standby search please make sure that
you select Standby Search as On.
  Language 
  In this menu the user can adjust the preferred 
language. Language is changed by pressing 
OK button. 
 
 
   
   
Menu 
: shows the language of the system 
  Preferred 
  These settings will be used if available. 
Otherwise the current settings will be used. 
  •  Audio 
: by pressing “
” or “” keys change the 
audio language.
•  Subtitle 
: alter the subtitle language with “
” or “” keys. The chosen language will be 
seen in subtitles.
DivX Subtitle
• In order to display subtitles properly, use this 
setting to select a DivX subtitle language. By 
pressing “
” or “” button, select the desired 
language option.
•  Guide 
: By pressing  “
” or “” buttons change 
the guide language. 
  Current 
  •  Audio 
:  if audio language is supported change 
the audio language by pressing “
” or “” 
buttons •  Subtitle 
: if subtitle is backed up, alter the 
subtitle language with “
” or “” buttons. The 
chosen language will be seen in subtitles. 
Note: If the Country option is set to Denmark, Sweden, 
Norway or Finland, the Language Settings menu will 
function as described below:
Language Settings
In the configuration menu, highlight the 
Language Settings item by pressing “
” or “
” buttons. Press OK and Language Settings 
submenu will be displayed on the screen:
Use “
” or “” buttons to highlight the menu 
item that will be adjusted and then press “
” or 
“
” button to set.
Notes:
• System Language determines the on-screen 
menu language.
• Audio Language is used for selecting the 
soundtrack of a channels.
• Primary settings are the first priority when 
multiple choices are available on a broadcast. 
Secondary settings are the alternatives when 
the first options are not available.
• DivX Subtitle options functions as described 
above.
  Installation 
  The Installation menu is mainly intended to 
help you for creating a Channel Table in the 
most effi cient way. Select Installation from the 
Confi guration menu by pressing “
” or “” 
buttons. 
  This menu includes the following items: 
  • Automatic channel scan
• Manual Channel Scan
• Clear Service List (*)
• First Time Installation 
(*) For Denmark, Sweden, Norway or Finland.
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   29MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   2915.04.2009   18:56:5015.04.2009   18:56:50