Samsung UE 55C7000 User Manual

							41English
04 Advanced FeaturesPlaying movie continuously (Resume Play)
If you exit the playing movie function, the movie can be played later fr\
om the point where it was stopped.
 
✎If you press the  ENTERE button (Chaptering ) during playing the file, you can explore scene divided into 5 chapters 
you want.
1.  Select the movie file you want to play continuously by pressing 
the  or  button to select it from the file list section.
2.  Press the 
 (Play) / ENTERE button.
3.  Select Play Continuously (Resume Play) by pressing the Blue 
button. The Movie will begin to play from where it was stopped.
 
✎The Blue button is available when resuming play.
 
✎If the  Continuous Movie Play Help  function is set to On 
in the  Settings  menu, a pop-up message will appear 
when you resume play a movie file.
Music
Playing Music
1.  Press the  or  button to select Music, then press the 
ENTER
E button in the Media Play menu.
2.   Press the /// button to select the desired Music file in 
the file list.
3.  Press the ENTER
E button or  (Play) button.
 – During music playback, you can search using the  and   button.
 –
 (REW) and  (FF) buttons do not function during play.
 
✎Only displays the files with MP3 and PCM file extension. Other 
file extensions are not displayed, even if they are saved on the 
same USB device.
 
✎If the sound is abnormal when playing MP3 files, adjust the  Equalizer in the Sound  menu. (An over-modulated MP3 file 
may cause a sound problem.)
Creating My Playlist
1.  Press the /// button to select the tracks you want to add and press the TOOLS button.
2.  Select Add My Playlist.
3.   When the Add My Playlist menu appears, select New My Playlist.
 
✎To add to an old play list, simply select the play list you want to add music to.
4.  The newly created or updated playlist will be in the main Music page.
Playing My Playlist
Select the My Playlist folder and it will play automatically. Press the  or  button to select a different music file within the 
play list.
3/15I Love you
Jhon
Music 1No SingerMusic 2No SingerMusic 3No SingerMusic 4No SingerMusic 5No Singer
I Love You
Jhon
1st Album
Pop
2010
4.2MB
01:10 / 04:02
SUME \f&		 L 
						

							42English
Advanced Features
Photos
Viewing a Photo (or Slide Show)
1. Press the  or  button to select Photos, then press the 
ENTER
E button in the Media Play menu.
2.   Press the /// button to select the desired photo in the 
file list.
3.  Press the ENTER
E button or  (Play) button.
 – While a photo list is displayed, press the 
 (Play) / 
ENTER
E button on the remote control to start the slide 
show.
 – All files in the file list section will be displayed in the slide sh\
ow.
 – During the slide show, files are displayed in order.
 
✎Music files can be automatically played during the Slide Show if 
the  Background Music  is set to On.
 
✎The  BGM Mode  cannot be changed until the BGM has finished 
loading.
 
¦ Playing Multiple Files 
Playing selected video/music/photo files
1.  Press the Yellow button in the file list to select the desired file.
2.   Repeat the above operation to select multiple files.
 
✎NOTE
 
The c mark appears to the left of the selected files.
 
To cancel a selection, press the Yellow button again. 
 
To deselect all selected files, press the  TOOLS button 
and
 select  Deselect All .
3.   Press the TOOLS button and select Play Selected Contents.
Playing the video/music/photo file gr
 oup
1.  While a file list is displayed, move to any file in the desired group.
2.  Press the TOOLS button and select Play Curr
 ent Group.
 
¦ Media Play - Additional Functions
Sorting the file list
Press the Blue button in the file list to sort the files.
Category Operation Videos Music Photos
 Basic ViewDisplays the whole folder. You can view the photo by selecting the folder.>>>
 TitleSorts and displays the file title in Symbol/Number/Alphabet/Special or\
der.>>>
 PreferenceSorts and displays the file by preference. You can change the file preference in the file 
list section using the Green button.>>>
 Latest DateSorts and shows files by the latest date.>>
 Earliest Date
Sorts and shows files by the earliest date.>>
 ArtistSorts the music file by artist in alphabetical order.>
 AlbumSorts the music file by album in alphabetical order.>
 GenreSorts music files by the genre.>
 MoodSorts music files by the mood. You can change the music mood information.>
 MonthlySorts and shows photo files by month.>
Image1024.jpg          1024x768  2010/2/1  3/15
SUME \f&		 L 3&]2.		 T Tools   R Return
Normal
1/1/Movie 01 avi
SUM
Movie 01 avi Jan 10 2010
Jan 10 2010
Jan 10 2010
Jan 10 2010
Jan 10 2010 Jan 10 2010
Jan 10 2010
Jan 10 2010
Jan 10 2010
Jan 10 2010
Movie 03 avi
Movie 05 avi
Movie 07 avi
Movie 09 avi Movie 02 avi
Movie 04 avi
Movie 06 avi
Movie 08 avi
Movie 10 avi
 Change Device Select     Sorting  T To o l s
Videos
?	
						

							43English
04 Advanced FeaturesVideos/Music/Photos Play Option menu
During file playback, press the TOOLS button.
CategoryOperation Videos Music Photos
Title You can move directly to another Title.
>
Repeat ModeYou can play movie and music files repeatedly.>>
Picture Size 
(Mode1 / Mode2 / Original)You can adjust the picture size to your preference.>
Picture Setting
You can adjust the picture setting. (p. 16~22)>>
Sound SettingYou can adjust the sound setting. (p. 22, 23)>>>
Subtitle SettingYou can play the video with Subtitles. This function only works if the su\
btitles are the 
same file name as the video.>
AudioYou can enjoy video in one of supported languages as required. The function is only 
enabled when stream-type files which support multiple audio formats are played.>
Stop Slide Show / 
Start Slide ShowYou can start or stop a slide show.>
Slide Show Speed
You can select the slide show speed during the slide show.>
Slide Show EffectYou can set various slide show effects.>
Background MusicYou can set and select background music when watching a slide show.>
ZoomYou can zoom into images in full screen mode.>
RotateYou can rotate images in full screen mode.>
Home BackgroundYou can move the file to the Media Play desktop.>
InformationYou can see detailed information about the played file.>>>
Settings
Using the Setup Menu
 
■ Background Setting: Select to display the background you want.
 
■ Continuous Movie Play Help (Resume Play) (On / Off): Select to display the help pop-up message for continuous movie 
playback.
 
■ Get DivX® VOD registration code: Shows the registration code authorized for the TV. If you connect to the DivX web site 
and register, you can download the VOD registration file. If you play the VOD registration using Media Play, the registration 
is completed.
 
✎For more information on DivX® VOD, visit “www.DivX.com.”
 
■ Get DivX® VOD deactivation code: When DivX® VOD is not registered, the registration deactivation code is displayed. If 
you execute this function when DivX® VOD is registered, the current DivX® VOD registration is deactivated.
 
■ Information: Select to view information about the connected device.
 
						

							44English
Advanced Features
Anynet+
What is Anynet+? t
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung \
TV’s remote. The Anynet+ system can be used only with Samsung devices that hav\
e the Anynet+ feature. To be sure your 
Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to a Samsung Home Theater
1. Connect the HDMI IN (1(DVI), 2(ARC), 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ 
device using an HDMI cable.
2.  Connect the HDMI IN jack of the home theater and the HDMI OUT jack of th\
e corr
esponding Anynet+ device using an 
HDMI cable.
 
✎NOTE  
 
Connect the Optical cable between the  DIGITAL AUDIO OUT (OPTICAL) jack on your T V and the Digital Audio Input 
on
 the Home Theater.
 
The ARC function enables digital output of sound using the  HDMI IN 2(ARC) port and can only be operated when 
t
he TV is connected to an audio receiver that supports the ARC function.
 
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from 
the Home Theater’s Front, Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect 
the  DIGITAL AUDIO OUT (OPTICAL)  jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to the 
A

mplifier or Home Theater, not the TV.
 
You can connect only one Home Theater.
 
You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.
 
Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
 
Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
Home Theater Anynet+ 
Device 1 Anynet+ Device 
2, 3, 4
TV Rear Panel
Optical Adapter  (Supp ied)
Optical Cable (Not Supplied)HDMI Cable (Not Supplied) HDMI Cable (Not Supp ied)
HDMI Cable (Not Supplied)
 
						

							45English
04 Advanced FeaturesAnynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+\
 devices connected to the TV.
Anynet+ Menu DescriptionView TV Changes Anynet+ mode to TV broadcast mode.
Device List Shows the Anynet+ device list.
(device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of 
the DVD recorder will appear.
(device_name) INFO Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the 
play menu of the DVD recorder will appear.
Recording: (*recorder) Starts recording immediately using the recorder. (This is only available for devices that  support the recording function.)
Stop Recording: (*recorder) Stops recording. Receiver Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is 
connected, it will be represented as (*device_name).
 
¦ Setting Up Anynet+ 
 
OMENUm  Application  Anynet+ (HDMI-CEC)  ENTERE
 
■ Setup
Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
 
✎When the  Anynet+ (HDMI-CEC)  function is disabled, all the Anynet+ related operations are deactivated.
Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
 
✎The active source on the T V must be set to T V to use the Anynet+ function.
 
✎Even if an external device is still recording, it may turn off.
 
¦ Switching between Anynet+ Devices 
1.  Anynet+ devices connected to the TV are listed.
 
✎If you cannot find a device you want, press the Red button to refresh the list.
2.  Select a device and press the ENTER
E button. You can switch to the selected device.
 
✎The  Device List  menu will only appear when you set Anynet+ (HDMI-CEC)  to On in the  Application  menu.
 
Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching 
operation.
 
If you have selected external input mode by pressing the  SOURCE button, you cannot use the Anynet+ function. 
M
ake sure to switch to an Anynet+ device by using the  Device List.
 
						

							46English
Advanced Features
 
¦ Recording 
You can make a recording of a TV Program using a Samsung recorder.
1.  Select Recording.
 
✎When there are more than two recording devices
 
When multiple recording devices are connected, the recording devices are listed. Select one recording device in 
the  Device List .
 
✎When the recording device is not displayed, select  Device List and press the Red button to search devices.
2.  Press the EXIT button to exit.
 
✎You can record the source streams by selecting  Recording: (device_name).
 
✎Pressing the  (REC) button will record whatever you are currently watching. If you are watching video from 
another device, the video from the device is recorded.
 
✎Before recording, check whether the antenna jack is properly connected to the recording device. To properly 
connect an antenna to a recording device, refer to the recording device’s users manual.
 
¦ Listening through a Receiver 
You can listen to sound through a receiver (i.e Home Theater) instead of the TV Speaker.
1.  Select Receiver and set to On.
2.  Press the EXIT button to exit.
 
✎If your receiver supports audio only, it may not appear in the device list.
 
✎The receiver will work when you have properly connected the optical in jack of the receiver to the  DIGITAL AUDIO 
OUT
 (OPTICAL)  jack of the T V.
 
✎When the receiver (i.e Home Theater) is set to On, you can hear sound output from the T V’s Optical jack. When 
the T V is displaying a DT V (air) signal, the T V will send out 5.1 channel sound to the receiver. When the source is a 
digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from 
the receiver.
 
✎NOTE
 
You can only control Anynet+ devices using the T V remote control, not the buttons on the T V.
 
The T V remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
 
The Anynet+ functions do not operate with other manufacturers’ products.
Using the ARC function
You can listen to sound through a receiver connected HDMI cable without the need for a separate optical cab\
le.
1.   Select  Receiver and set to On.
2.   Press the EXIT button to exit.
 
✎To use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the  HDMI 
I
N 2 (ARC) port.
 
✎To disable the ARC function, set the  Receiver to Off. Even if the T V transmits the ARC signal continuously, the receiver 
will be blocked from receiving the signal.
 
						

							47English
04 Advanced Features 
¦ Troubleshooting for Anynet+
Problem Possible Solution
Anynet+ does not work. 
XCheck if the device is an Anynet+ device. The Anynet+ system supports An\
ynet+ devices only.

X Only one receiver (home theater) can be connected.

X Check if the Anynet+ device power cord is properly connected.

X Check the Anynet+ device’s Video/Audio/HDMI cable connections.

X Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.

X Check whether the TV remote control is in TV mode.

X Check whether the remote control is Anynet+ compatible.

X Anynet+ doesn’t work in certain situations. (Searching channels, operating  Media Play or Plug & Play (initial 
setup), etc.)

X When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off 
and on again.

X Check if the Anynet+ Function of Anynet+ device is set on.
I want to start Anynet+. 
XCheck if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to 
On in the Anynet+ Setup menu.

X Press the  TOOLS button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+. 
XSelect V

iew TV in the Anynet+ menu.

X Press the SOURCE button on the TV remote control and select a non- Anynet+ device.

X Pr

ess z, PRE-CH, and FAV.CH to change the TV mode. (Note that the channel button operates 
only when a tuner
-embedded Anynet+ device is not connected.)
The message “Connecting to 
Anynet+ device...” appears on the 
screen. 
X
You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.

X Use the remote control when the Anynet+ setting or switching to view mode is complete.
The Anynet+ device does not play. 
XYou cannot use the play function when Plug & Play (initial setup) is in progress.
The connected device is not 
displayed. 
X
Check whether or not the device supports Anynet+ functions.

X Check whether or not the HDMI cable is properly connected.

X Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.

X Search Anynet+ devices again.

X You can connect an Anynet+ device using the HDMI cable only. Some HDMI ca\
bles may not support Anynet+ 
functions.

X If connection is terminated because there has been a power interruption or the HDMI cable has been 
disconnected, please repeat the device scan.
The TV Program cannot be 
recorded. 
X
Check whether the antenna jack on the recording device is properly connected.
The TV sound is not output 
through the receiver. 
X
Connect the optical cable between TV and the receiver.

X The ARC function enables digital output of sound using the  HDMI IN 2(ARC) port and can only be operated 
when the TV is connected to an audio r

eceiver that supports the ARC function.
 
						

							48 English 
 Advanced Features 
  Internet@TV  
 
¦   Getting Started with Internet@TV  
  Screen Display  
 
✎   
NOTE    
 
  
Configure the network settings before using   Internet@TV 
. For more information, refer to “Network Connection” (p. 
30). 
 
 
Unsupported fonts within the provider’s content will not display normally. 
 
 
Slow responses and/or interruptions may occur, depending on your network conditions. 
 
 
Depending on the region, English may be the only language supported for application services. 
 
 
This feature is not available in some locations. 
 
 
If you experience a problem using a application, please contact the content provider. 
 
 
According to circumstances of the contents provider, an application’s updates or the application itself may be 
discontinued. 
 
  Depending on your country’s regulations, some applications may have limited service or not be supported.   
INTERNET
@ TV  Internet@TV brings useful and entertaining 
contents and services directly from the web to 
your TV.  
 
O    MENU  m        Application        Content 
View       Internet@TV        ENTER  
E   
  
Recommended Applications: 
  Displays the recommended service by 
Samsung. You are not able to add or 
delete a service in this list.   
   Downloaded Applications: 
  Displays the downloaded applications 
through the Samsung Apps.   
   Application service: 
 
You can experience 
various service by provided  samsung.  
   
Internet@TV   Settings:
Edit and confi gure applications  and   Internet@TV   settings.    
Controls: 
 

X   
 Red (  Login  ): To log in to   Internet@TV . 

X  B Green (  Mark as Favorite  ): To mark the applications as a favorite. 

X   Blue (  Sort by  ): To sort the applications. 

X  R 
   Return  : To return to the previous menu.   
 
✎  
The color buttons may work differently depending on the application.   
  
Information:
Displays notices, new  applications, and 
advertisements brought to  you by Samsung product  introductions.   
  
TV Screen:
Displays the current channel.   
  
Recommended  
  
Samsung Apps     Settings     
My Applications 
 
 
   Login        B		\f	\f&	;\f3							  Sort by         R   
Return  
  
by Date  1/1 
 
  
My Applications   
  
Recommended 
   
by Date  1/1  
  
Settings  
  
Samsung Apps 
 
 
  Login       B  \f	\f&	;\f3	 						  Sort by        R   
Return  
 
						

							49English
04 Advanced FeaturesAccount Login
For an application with multiple accounts, use  and  to 
access the different accounts.
 
✎For a more enjoyable application experience, register 
and log in to your account.
 
✎For instructions on creating an account, refer to 
Settings   Internet@TV ID   Create.
1.  Press the Red button in the Internet@TV home page.
2.  Select the desired User account, then press the 
ENTER
E button.
 
✎If you want to create an account, press the Red 
button; then the create account OSD window will 
appear.
3.   After selecting User account, enter the Password using 
the number button on the remote control. 
 
✎When login succeeds, User account  will be 
displayed on the screen.
 
¦ Setting up Internet@TV
Settings
Create IDs and configure Internet@TV settings from this 
screen. Highlight Settings using the  and  buttons and 
press the ENTER
E button.  
■ System Setup
Ticker Autorun (Off / On): You can set Ticker Autorun 
to come on when powering on the TV.
 
✎The  Ticker  application provides useful News, 
Weather, and Stock Market information. The 
Ticker  application on Internet@TV  must be 
downloaded to use this feature.
 
✎Depending on your country,  Ticker application 
may have a different service or not be supported.
Channel Bound Service (Off / On): Some channels 
support applications as an Internet data service, allowing 
you to access the Internet service while watching TV.
 
✎Only available if supported by the broadcaster.
Change the Service Lock password
 
✎The default password set is “0-0-0-0.”
 
✎If you forget the password you created, press the 
following sequence of remote control buttons to 
reset the password to “0-0-0-0”:  POWER (off)  
MUTE   8  2  4  POWER  (on).
Reset: Resets Inter

net@TV settings to factory default 
settings.
 
■ Internet@TV ID
You can use this menu when creating and deleting 
the account. You can control your account including 
contents site’s account information. 
Create: Create an account and link it with desired 
service applications.
 
✎NOTE
 
Maximum number of accounts is 10.
 
Maximum number of characters is 8.
R Return
Settings

						

							50English
Advanced Features
How to create Internet@TV ID
Before creating a User account, you should download 
the application first on the Samsung Apps.
1. Using the /// button, select Settings. Then 
press the ENTER
E button.
2.  Press the  button to select Internet@TV ID, then 
press the ENTER
E or  button.
3.  Select Create. The Keypad screen will appear.
4.  The keypad OSD will be displayed on the screen.
Using the Keypad
Pressing the – button on the remote while you are 
using the Scr

een Keypad enables you to change the 
text fields to lower case, upper case, numbers and 
icons.
You can use this Screen Keypad in a several Internet@
TV applications.
Here is how to input characters.
4-1.  For example, suppose that you want to input 
“105Chang”.
4-2.  Press the – button on the remote twice to 
change the input mode fr
 om lower case to 
numbers.
4-3.  Press the 1, 0 and 5 button in numerical order.
4-4.  Pr

ess the – button on the remote 3 times to 
change the input mode fr
 om numbers to upper 
case.
4-5.  Press the 2 button on the remote 3 times to 
input C.
4-6.  Pr

ess the – button on the remote 3 times to 
change the input mode fr
 om upper case to 
lower case.
4-7.  Press buttons on the remote to input the rest 
of “Chang”. When done, press the ENTER
E 
button. 5. 
Using the number buttons, enter the User account 
and Password.
 
Password must be numbers only.
 
You can delete the entered character using the 
PRE-CH  button.
 
Using the  (REW) or  (FF) button, you 
can select icon you want to enter in icon keypad 
screen.
6.  Account created. You can use the services provided 
by all users of your Samsung TV with a single 
login by linking the users’ account to the TV ID. If 
you want to register a service site ID, select Ye s . 
Service Site list will appear on the screen.
7.  Select Register of the Service Site you want, then 
press the ENTER
E button.
8.  Using number buttons, enter your application site ID 
and password. Then press the ENTER
E button.
9.  Registered successfully. If you add another service 
site, select Ye s . then press the ENTER
E button, 
go to step 5.
10.  When completed, select OK. Then press the 
ENTER
E button.
Manager  – Service Site: Register login information for service 
sites.
 – Change Password: Change account password.
 – Delete: Delete the account.
 
■ Service Manager: Delete and lock applications installed 
to Internet@TV.
Lock: Lock the application.
 
✎Accessing a locked application requires the 
password.
Delete: Delete the application.
 
■ Properties: Display information about Internet@TV. Use 
the Check the speed of your internet connection 
option to test your network connection.