Samsung Ud55ep Manual

							51
Home feature
 ―To use the Player feature, set Play via to MagicInfo in System .
Play a range of content such as channels with schedules assigned, templates or files.
Play channels or content using any of the following methods.
 • Network Channel: Play content using the server.
 ―
To run Network Channel, make sure the product is connected to the server.
 • Local Channel: Play content in internal memory or from external memory.
Player
HOME  → Player → ENTER E
PlayerPlay a variety of content, such as 
scheduled channels, templates or files.
Clone Product
Picture Mode ID Settings
On/Off TimerVideo Wall
TickerNetwork Status
More settingsSchedule Template
 -
The displayed image may differ depending on the model.
This feature is provided in Support → Go to Home.
Accessible using the HOME button on the remote control.
Chapter  05                                       
						

							52
Approving a connected device from the server
Approving the Lite server
 •
Set MagicInfo Mode to Lite in Server Network Settings.
Approve and use the Lite server now.
 ―
First configure the server Network Settings before device approval.
1 Access the server you have assigned to your device.
2 Enter your ID and password to log in.
3 Select Device from the top menu bar.
4 Select Lite from the menus on the left.
5 Select Unapproved from the sub-menus of Lite.
6 Select the Approve button for your device from the list of unapproved Lite devices.  
						

							53
7 Enter the information required to approve the device.
 •Device Name: Enter the device name.
 •
Device Group: Select  to specify the group.
 •Location: Enter the current location of the device.
 ―
Pressing the INFO button on the remote when a network schedule is running will display the details of 
the schedule. Check that the correct device has been selected by viewing the device ID in the details.
8 Select the All  menu to check that the device has been registered.
9 When the device is approved by the server, the schedule registered in the selected group will be 
downloaded to the device. The schedule will run after it is downloaded.
 ―
For further details on how to configure a schedule, refer to the .
 ―If a device is deleted from the list of devices approved by the server, the device will reboot to reset its 
settings.
Setting the current time
A schedule may not run if the time set on the device is different from the server's current time.
1 Go to the tabs Device → Time.
2 Select your device.
3 Select Clock Set, and sync the time with the server.
 • When connecting to the server for the first time, the time on the product is set using the GMT time 
of the region where the server is installed.
 •The time on the product can be changed from the server as shown in step 3.
 •
Turning the product off and then on again will restore the time setting on the product to the last 
time that was set from the server.
 ―
For further details on how to manage the time (scheduling, holiday management, etc.), refer to the 
.  
						

							54
Approving the Premium server
 •
Set MagicInfo Mode to Premium in Server Network Settings.
Approve and use the Premium server now.
 ―
First configure the server Network Settings before device approval.
1 Access the server you have assigned to your device.
2 Enter your ID and password to log in.
3 Select Device from the top menu bar.
4 Select Premium from the menus on the left.
5 Select Unapproved from the sub-menus of Premium.
6 Select the Approve button for your device from the list of unapproved Premium devices.  
						

							55
7 Enter the information required to approve the device.
 •Device Name: Enter the device name.
 •
Device Group: Select  to specify the group.
 •Location: Enter the current location of the device.
 ―
Pressing the INFO button on the remote when a network schedule is running will display the details of 
the schedule. Check that the correct device has been selected by viewing the device ID in the details.
8 Select the All  menu to check that the device has been registered.
9 When the device is approved by the server, the schedule registered in the selected group will be 
downloaded to the device. The schedule will run after it is downloaded.
 ―
For further details on how to configure a schedule, refer to the .
 ― If a device is deleted from the list of devices approved by the server, the device will reboot to reset its 
settings.
Setting the current time
A schedule may not run if the time set on the device is different from the server's current time.
1 Go to the tabs Device → Time.
2 Select your device.
3 Select Clock Set, and sync the time with the server.
 • When connecting to the server for the first time, the time on the product is set using the GMT time 
of the region where the server is installed.
 •The time on the product can be changed from the server as shown in step 3.
 •Turning the product off and then on again will restore the time setting on the product to the last 
time that was set from the server.
 ―
For further details on how to manage the time (scheduling, holiday management, etc.), refer to the 
.  
						

							56
Network  Channel
Play content, templates and schedules configured on the server.
 •
You can view whether the server is connected (approval) in the Player menu screen.
To view whether the server is connected when a Network Channel is running, press INFO on the remote.
1 Select Network Channel from the Player menu.
 ―
The No channel. message appears if no channel has been registered in Network Channel.
2 Network Channel will run.
Local  Channel
Play a schedule or channel that was configured in the product.
1 Select Local Channel from the Player menu.
 ―
The No channel. message appears if no channel has been registered in Local Channel.
2 Local Channel will run.
Published  Content
Play a template stored on a connected USB device.
 ―
The Published Content feature appears only when a USB device containing templates is connected.
 ―Play scheduled content.
Network  File
M y T emplates
Play a template in My Templates stored in the internal memory of the product.
PlayerDevice : All Content : All Sort By : File NameOptions
1 / 4 item(s)
Browse and play content stored in the selected device.
No channel. Network Channel
Local Channel Network File
My Templates
Published Content
No channel.
 -
The displayed image may differ depending on the model.                                                                                                                                                                            
						

							57
Available features in the Player page
The Player list page provides the following features.
 •
Device
Select either Internal or USB to search for a desired device list.
 -All / Internal / USB
 •
Content
Select a content type as criterion to search for a desired content list.
 -All / Video / Image / PDF / Flash / Office / My Templates
 •
Sort By
Specify the content sort criterion.
 -File Name / Recently Played
 • Options
Menu items in the P layer page
Option Name Operations
Play  S electedSelect and play desired content.
S endCopy content to another storage device.
D eleteDelete desired content.
S ettingsConfigure detailed properties of content.
 ―
See the following page for details on the Settings feature.  
						

							58
Player page S ettings menu
Settings
Settings
Default Storage
Picture size
Display Duration
Transition Effect
Content Orientation Internal
Random
Landscape
Select the storage location that you want to download scheduled channels 
from the network to.
Close
 -The displayed image may differ depending on the model.
Default  Storage
Select the storage location that you want to download scheduled channels from the network to.
 •
Internal / USB
Picture  size
Set the screen size for content.
If Picture size is set to Video or Image
 •
Full Screen / Original Size / Screen Fit
If Picture size is set to PDF or Office
 • Full Screen / Original Size
 ―
This feature is only available for Video, Image, PDF and Office files.
Display  Duration
Set the duration for each page in a slideshow.
 ―
This feature is only available for Image, PDF, Flash and Office files.
Transition  Effect
Configure transition effects between pages or scenes in a slideshow or video file.
 •
None / Fade1 / Fade2 / Blind / Spiral / Checker / Linear / Stairs / Wipe / Random
 ―
This feature is only available for Image files.
Content  O rientation
Switch the orientation of playing content to Landscape or Portrait mode.
 •
Landscape / Portrait
 ―
If Content Orientation is Portrait view, it does not support VP8 video codec.   
						

							59
Default  Content
This default content will be displayed if you run a channel while no programs are scheduled on the channel.
 •
None
Safely  Remove
Safely removes USB memory
Reset
Restore all the values under Settings to the default when the product was purchased.  
						

							60
When Content is Running
Viewing the details of the content that is running
Information
Current Time :
Type :
CH Number :
CH Name :
Software Version :
No Schedule to download00:00am
Network Channel
No channels selected
No channels selected
B2B-EP-APP-5413-045 OK
 -The displayed image may differ depending on the model.
Press the INFO button on the remote control.
 • Current Time
 •Type : Type of channel currently playing
 ―
Only applicable during Network Channel / Local Channel playback.
 • CH Number: Number assigned to the channel currently playing
 ―
Only applicable during Network Channel / Local Channel playback.
 • CH Name: Name of the channel currently playing
 ―
Only applicable during Network Channel / Local Channel playback.
 • Software Version: Displays the software version of a device
 •MAC ID: Displays the original identification number of a device
 •Tags: Tag settings assigned to a device from the server
 ―
Only applicable during Network Channel / Local Channel playback.
 • Server: Displays the connection status (Connected, Not connected or Non-Approval) of the server
 •USB: Displays the connection status of a USB device